ELGATO Facecam-MK.2 HD Webcam for Streaming Gaming User Guide
- June 1, 2024
- elgato
Table of Contents
ELGATO Facecam-MK.2 HD Webcam for Streaming Gaming
Specifications
- Applicant Name: Corsair Memory, Inc.
- Product Name: Elgato Facecam
- Model No.: 20WAC9901
Product Usage Instructions
Installation
- Download and install the Elgato camera app.
- Mount Facecam on your monitor.
- Alternatively, secure your Facecam to your Elgato Multi-Mount system via the 1/4-inch thread.
- Open the privacy shutter.
- Only use the supplied USB 3.0 cable (or equivalent/better).
- Clean the lens with a microfiber cloth. Do not use paper towels or detergents.
Enjoy
Enjoy using Facecam with your favourite streaming and video conferencing apps:
- Zoom
- Skype
- MS Teams
- Slack
- OBS
- Google Meet
- FaceTime
Or any other application supporting the UVC standard.
Installation
-
Download and install the Elgato camera app.
elgato.com/download -
Mount Facecam on your monitor.
-
Alternatively, secure your Facecam to your Elgato Multi-Mount system via the 1/4-inch thread.
-
Open the privacy shutter.
-
Connect Facecam directly to a USB 3.0 (or better) port on your PC or Mac – do not use a USB hub.
-
Clean the lens with a microfiber cloth. Do not use paper towels or detergents.
-
Enjoy using Facecam with your favourite streaming and video conferencing apps:
Zoom Skype MS Teams Slack OBS Google Meet FaceTime or any other application supporting the UVC standard.
Technical specifications
- Supported Resolutions (uncompressed): SDR & HDR: 1080p60, 1080p30, 720p60, 720p30, 540p60, 540p30
- Optics: Elgato Prime Lens
- Focus Range: 30 – 120 cm | 11.8 – 47.2 in
- Aperture: f/2.4
- Focal Length: 24 mm (full-frame equivalent)
- Field of View: 84° (diagonal)
- Sensor: Sony® STARVIS™ CMOS
- Connection: USB 3.0 (or better), Type C
- Dimensions: W 84 x H 38 x D 61 mm | 3.3 x 1.5 x 2.4 in (without mount)
- Weight: 90 g | 0.2 lb (without mount)
FCC
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment. This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and the human
body.
For questions about Elgato product compliance with FCC regulations, please
contact: Compliance Officer, Corsair Memory Inc., 115 North McCarthy Blvd,
Milpitas, CA 95035, USA
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference
- this device must accept any interference, including interference that may cause undesired operation of the device.
Applicant Name: Corsair Memory, Inc.
Product Name : Elgato Facecam
Model No.: 20WAC9901
Manufactured Year & Month: Please refer to the gift box sticker
Manufacturer & Origin: Corsair Memory, Inc./Please refer to the gift box
sticker
A/S: 1522-1460
R-R-CSI-20WAC9901
Elgato, a division of:
- Corsair Memory Inc., 115 North McCarthy Blvd, Milpitas, CA 95035, USA
- Corsair Components Limited, 1020 Eskdale Road, Winnersh Triangle, Wokingham, RG41 5TS, UK
- Corsair Memory BV, Wormerweg 8, 1311 XB, Almere, Netherlands
- Copyright 2023 Corsair Memory Inc. All rights reserved. Elgato and the Elgato logo are trademarks of Corsair Memory Inc., registered in the U.S. and other countries. SONY and STARVIS are registered trademarks of Sony Corporation. All other trademarks belong to their respective owner. Part: 51WAC9901
FAQ
-
Q: What should I do if I encounter interference issues with the device?
- A: If you experience interference, you can try the following steps:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
-
Q: What should I do if I have questions about FCC compliance?
- A: For questions about Elgato product compliance with FCC regulations, please contact the Compliance Officer, Corsair Memory Inc., 115 North McCarthy Blvd, Milpitas, CA 95035, USA.