Diamond BSB-6N-A1-R2 Stainless Steel Serving Trays User Manual
- June 12, 2024
- DIAMOND
Table of Contents
- BSB-6N-A1-R2 Stainless Steel Serving Trays
- Product Information
- Product Usage Instructions
- SECURITY INSTRUCTIONS
- CONTENTS OF CARDBOARD PACKAGING
- CONFORMITY OF USE
- WAY OF FUNCTIONING
- FUNCTIONING / MANIPULATION
- CLEANING AND MAINTENANCE
- TECHNICAL SPECIFICATIONS
- NORMS AND LEGALS DISPOSALS
- ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
- GUARANTEE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BSB-6N-A1-R2 Stainless Steel Serving Trays
Product Information
- The Refrigerated Salad Bar is an upmarket appliance made in France that combines excellent technical qualities with user-friendliness. It comes with a salad bar device, accessories including a roof, two uprights, two wire covers, two glasses, and screws. The package also includes technical documentation for the thermostat.
- The device is designed for installation and use as a refrigerated salad bar and comes in two models: SB 40 F B and SB 60 F B. The dimensions and weight of the models are as follows:
- SB 40 F B: 1442x953x1374 mm, 125 Kg
- SB 60 F B: 2092x953x1374 mm, 160 Kg
- The power supply required for both models is 220-240 V~, and they operate on a current of 2.5 A. The refrigerant used is R134 A, and the power consumption is 450 W for SB 40 F B and 480 W for SB 60 F B. The available colors are Wenge/Light oak/Mahogany/Limed white wood.
Product Usage Instructions
Security Instructions
Before using the refrigerated salad bar, please read and follow the
provided security instructions to ensure safe operation.
Contents of Cardboard Packaging
Ensure that all the components listed in the instructions are included in
the cardboard packaging.
Conformity of Use
Make sure to use the refrigerated salad bar according to the specified
guidelines and intended purpose.
Way of Functioning
Refer to the provided diagram for an understanding of the functioning of the
refrigerated salad bar.
Functioning / Manipulation
-
Installation / Assembly:
- Place the equipment on a stable and heatproof surface.
- Avoid placing the device near walls or partitions made of combustible materials.
- Maintain a distance of 10 cm from the wall or partition.
-
First Starting:
Clean the device before the first use. Refer to the cleaning instructions provided. Check the electricity network’s tension and frequency, and ensure they match the values indicated on the descriptive plate. Make sure the cord and plug are not damaged. Set all control knobs to 0. Connect the device to a normalized plug with an earth connection. -
Use of Device:
Familiarize yourself with the elements of command and display. Use the on/off switch to start or stop the appliance. The temperature can be adjusted using the electronic thermostat according to the technical documentation provided. -
Breakdown / Repair:
In case of breakdown or damaged parts, contact your after-sales service and seek assistance from a qualified person. Provide the complete reference of your device (commercial name, type, and serial number) when contacting the after-sales service.
Cleaning and Maintenance
Before cleaning or performing maintenance tasks, disconnect the device from
the power supply. Follow the provided cleaning instructions to ensure proper
maintenance.
Technical Specifications
The technical specifications of the refrigerated salad bar are as follows:
- Model: SB 40 F B / SB 60 F B
- Dimensions: SB 40 F B – 1442x953x1374 mm, SB 60 F B – 2092x953x1374 mm
- Weight: SB 40 F B – 125 Kg, SB 60 F B – 160 Kg
- Power: SB 40 F B – 450 W, SB 60 F B – 480 W
- Gas: R134 A
- Temperature: Factory preset electronic thermostat
- Current: 2.5 A
- Voltage: 220-240 V ~
- Colors: Wenge/Light oak/Mahogany/Limed white wood
Norms and Legal Disposals
The refrigerated salad bar conforms to the specified norms and regulations
outlined in the user manual.
Elimination of Electric and Electronic Waste
The device complies with the directives for the proper disposal of electric
and electronic waste.
Congratulations for the acquisition of this upmarket appliance made in France. You chose an appliance which alloys the best technical qualities with a big user-friendliness. We wish you the biggest contentment.
SECURITY INSTRUCTIONS
Please respect these instructions scrupulously to avoid any risk of fire, electric shock, scald or other wounds and damage. During the use of this appliance, fundamental circumspection of security must always be noticed, such as :
- Take into account the instructions to be systematically kept with the appliance.
- Install the appliance always in instructions respect. A 10 cm distance minimum with the partition or the wall is necessary.
- Protect the appliance from direct light of the sun, frost and humidity.
- Never leave the appliance within the reach of children or disabled persons without surveillance.
- The machine has to be used only by qualified person.
- Never move the appliance when it is working.
- Check that the appliance is definitely off before connecting it up or disconnecting it.
- Do not touch the hot surfaces of the appliance. The temperature of the hot surfaces can be very important when the appliance is working. Always use handles and control knobs.
- Do not use the appliance for other functions than determined use.
- Do not leave the electrical cord in contact of hot surfaces.
- The appliance should not be used close to combustible materials.
- During use, look after not to obstruct hearings of aeration of the appliance
- To avoid any electric shock, never plunge the cord or plug in water or quite other liquid.
- If the cord is harmed, it must be replaced by the producer, its after sale service or persons of similar skills to avoid any risk.
- Entrust repairs only to a skilled person.
- Use only spare parts of origin.
- Before cleaning the appliance, do not forget to disconnect it.
CONTENTS OF CARDBOARD PACKAGING
- Device : A salad’bar
- Accessories :
- A roof, two upright, two wires cover, two glasses, screws.
- Technical documentation of the thermostat
- The present note
CONFORMITY OF USE
Use the salad’bar only to keep your cold meals (cold starters, shellfish, meat, desserts…) at a temperature between +2°C and +10°C during working and service hours. Afterwards they will be stores in a conventional cool chamber.
WAY OF FUNCTIONING
- This salad’bar exist in 2 versions : SB 40 F and SB 60 F. they respectively keep 4 containers GN 1/1 and 6 containers GN 1/1 cold.
- To turn on your salad’bar, press on the right switch (n°1 on picture) : the electronic thermostat (n°2 on picture) preset in factory is on. It flashes and then displays the temperature.
- Press on the left switch (n°3 on picture) to turn on the light (n°4 and 5 on picture). A 1/4 lock drain valve, in lower part, enable to drain water from the container (n°6 on picture).
FUNCTIONING / MANIPULATION
Installation / Assembly :
- Place the equipment on a stable and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materials even if it is very well isolated.
- A distance of 10 cm from the partition or the wall is considered enough.
First starting
-
First cleaning
Clean the device before the first use. (See 6 Cleaning) -
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a normalized plug with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on the electricity network, confide its connection to a qualified person.
-
Use of device :
- Elements of command and display
Command/Display| Function
---|---
Electronic thermostat (n°1 on picture)| Temperature setting
Switch 0/I (n°2 on picture)| Light on / Light off
Switch 0/I (n°3 on picture)| On/off - Starting
- Press on the switch (n°1 on picture), the machine is on. The preset electronic thermostat flashes and displays the temperature.
- Wait until the salad’bar is at the right temperature
- Press on the second switch (n°3 on picture) to turn on light.
- Temperature setting
- The electronic thermostat is preset in factory. It can be adjusted if necessary.
- To modify the temperature, refer to the technical documentation of the thermostat.
- Stopping the appliance
- Set each switch on 0: the appliance is no longer functioning.
- Disconnect the power cable.
- Clean the appliance. (See 6. Cleaning)
- Elements of command and display
-
Breakdown / repair :
- In case of breakdown or of damaged part, please call your after-sales service and confide any technical operation to qualified person.
- When you contact the after-sales service of your distributor or your store, give him the complete reference of your device (commercial name, type and serial number). This information appears on the visible descriptive plate behind the device.
CLEANING AND MAINTENANCE
Disconnect the device
- Clean regularly the metallic parts after each use by using only use non-abrasive products, warm water and wash liquid: avoid the abrasive toweling. Rinse your device with a wet sponge and dry it with a soft cloth.
- Never clean the device under a water jet, the infiltrations would risk to damage it in an irreparable way.
- Never immerse the cord or the plug in the water or quite other liquid to avoid any electric shock.
- Never use abrasive product or vinegar; it could damage the container in irremediable way.
TECHNICAL SPECIFICATIONS
Model | SB 40 F B | SB 60 F B |
---|---|---|
Dimensions | 1442x953x1374 mm | 2092x953x1374 mm |
Weight | 125 Kg | 160 Kg |
Power | 450 W | 480 W |
Gas | R134 A | R 134 A |
Temperature | +2° à +10° C | +2° à +10° C |
Current | 2.5 A | 2.5 A |
Voltage | 220-240 V ~ | 220-240 V ~ |
Colours | Wenge/Light oak/ Mahogany/Limed white wood | Wenge/Light oak/ |
Mahogany/Limed white wood
Wires colours correspondence :
- Phase Brown or Black or Grey
- Neutral Blue
- Earth Yellow-Green
NORMS AND LEGALS DISPOSALS
The device is conform to :
- IEC/EN 60335-1
- IEC/EN 60335-2-89
- EN 55014-1 + 55014-2
- EN 61000-3-2 + 61000-3-3
ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
The device respects the directives :
- 2002/96/CE (DEEE) N°34270064800021
- 2002/95/CE (ROHS)
- 2066/95 CE
- 2004/108 CE
Reach rule
- Never put the device among household waste.
- The device must be put down in a center of recycling for the electric equipments. The materials of the device are indeed reusable. By eliminating correctly the electric and electronic wastes, the recycling and quite other shape of re-use of worn equipments, you participate in a significant way in the environmental protection. For any information about the collection of electric and electronic waste, please contact your distributor.
GUARANTEE
- Conditions of guarantee
- The guarantee applicable to any device is the commercial guarantee of the distributor or the retailer. Please contact the store where you bought your device to know the precise conditions.
- The guarantee grants no right for damages.
- The dispositions which follow are not exclusive of the profit of the legal guarantee planned by articles 1641 and following ones of the Civil code relative to the defects and the latent defects.
- Exclusion clauses of the guarantee
Bad installation and bad maintenance, in particular if they do not respect current regulations or instructions appearing in this user guide.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>