SEALEY VS0204B.V2 Brake and Clutch Bleeder Cap Set Instructions

: June 1, 2024
: SEALEY

Table of Contents

SEALEY VS0204B.V2 Brake and Clutch Bleeder Cap Set
Product Information
Parts Description
More Information
Warranty
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY VS0204B.V2 Brake and Clutch Bleeder Cap Set

SEALEY-VS0204B-V2-Brake-and-Clutch-Bleeder-Cap-Set-
product

Product Information

Specifications

Model: VS0204B.V2
Internal Diameter: 43.5mm to 56mm depending on the part
Type: Bayonet and Rubber cone
Applications: Various vehicle manufacturers including Chrysler, Jeep, GM, Chevrolet, Honda, Nissan, Ford, Mazda, Toyota, Lexus, Hyundai, Mitsubishi, Subaru

FAQ

Q: How do I know which adaptor cap to use for my vehicle?
- A: Refer to the applications list in the manual to find the suitable adaptor cap for your vehicle manufacturer.
Q: Can I use this product for all types of vehicles?
- A: The set includes adaptors for various manufacturers, but it’s essential to check compatibility before use.
Q: What should I do when the product is no longer usable?
- A: Drain any fluids if applicable, recycle the product components, and dispose of them following local regulations for environmental protection.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Parts Description

SEALEY-VS0204B-V2-Brake-and-Clutch-Bleeder-Cap-Set-
fig-1

Item| Part no.| Description| Applications| Internal dia.| Type
---|---|---|---|---|---
20| VS0204.V4-20| ADAPTOR CAP ‘1’| Chrysler, Jeep| 43.5| Bayonet
21| VS0204.V4-21| ADAPTOR CAP ‘2’| Chysler, Jeep (Blanking cap)| 43.5| Bayonet
22| VS0204.V4-22| ADAPTOR CAP ‘3’| GM, Chevrolet, Hummer, Mazda| 49.5| Bayonet
23| VS0204.V4-23| ADAPTOR CAP ‘3’

90° ELBOW

90° ELBOW

| Toyota, Lexus| 46.5|
32| VS0204.V4-32| ADAPTORS (c/w TUBES)| | |
33| VS0204.V4-33| CLAMP ASSEMBLY| | |
34| VS0204.V4-34| HOOK BOLT| | |
35| VS0204.V4-35| CHAIN| | |

More Information

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.

Important: No Liability is accepted for incorrect use of this product.