JET SPRAY 800002231 Carb Choke Parts Cleaner Instructions
- June 1, 2024
- JET SPRAY
Table of Contents
INSTRUCTIONS
800002231 Carb Choke Parts Cleaner
JET SPRAY CARB/CHOKE & PARTS CLEANER 14oz. Model# 800002231
Keep away from battery terminals and electrical connections. Spray with can in
upright position. Insert plastic tube firmly into valve button.
With engine off and cool:
Carburetor: Remove the air cleaner and clean the outside of the
carburetor and all of the linkage. Avoid spraying electrical connections.
Manifold heat control: Spray on exposed ends of cool heat riser shaft.
Allow to penetrate and clean. Move counterweight up and down until free.
With engine running:
Carburetor: Spray to both ends of the choke valve shaft while working
choke by hand. Spray down and around the carburetor throat to remove deposits
from the throttle plate area. Do not spray down carburetor throat with engine
off. Do not spray below throttle plate.
Choke: If choke sticks, remove choke cover and spray. PCV Valve:
Disconnect the crankcase side of the valve and spray into the open end of the
valve while working the plunger back and forth.
Not recommended for fuel-injected vehicles. Will not harm catalytic converters
or oxygen sensors.
Contains no methanol or methylene chloride. If sprayed on painted surface,
wipe off at once. ****
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>