PHILIPS ST298Z Essential SmartBright Magnetic Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS ST298Z Essential SmartBright Magnetic
Product Specifications
- Accessory colour: Black
- Overall length: 268 mm
- Overall width: 45 mm
- Overall height: 30.5 mm
- Overall diameter: 268 mm
- Material: Aluminum
- Ingress protection code: Not specified
- Mech. impact protection code: Not specified
- Order product name: ST298Z In Driver 150W 48V 220-240V TW
- Full product name: Essential SmartBright Magnetic ST298Z In Driver 150W 48V 220-240V TW
- Order code: 872016950933799
Product Usage Instructions
Installation:
- Ensure the power source is turned off before installation.
- Mount the Essential SmartBright Magnetic in the desired location using appropriate fixtures.
- Connect the necessary wiring following the provided guidelines.
Commissioning:
- After installation, power on the ST298Z In Driver using the specified voltage range (220-240V).
- Verify that the product functions correctly by testing different control options if available.
Frequently Asked Questions (FAQ)
-
Q: Is the Essential SmartBright Magnetic suitable for outdoor use?
A: The product’s specific ingress protection and impact protection codes determine its suitability for outdoor use. Please refer to the product specifications for detailed information. -
Q: What is the warranty period for the Essential SmartBright Magnetic?
A: The warranty period may vary, please check with the manufacturer or retailer for specific warranty details.
ST298Z In Driver 150W 48V 220-240V TW
Essential SmartBright Magnetic is a comprehensive product family with a
magnetic design that supports an easier and more flexible way of installation
and commissioning. It offers a complete range of options with product
diversity and control availability.
Product data
General Information
- Accessory colour Black
- CE mark –
Mechanical and Housing
- Overall length 268 mm
- Overall width 45 mm
- Overall height 30.5 mm
- Overall diameter 268 mm
- Dimensions (Height x Width x Depth) 31 x 45 x 268 mm
- Material Aluminum
Approval and Application
- Ingress protection code
- Mech. impact protection code –
Product Data
- Order product name ST298Z In Driver 150W 48V 220-240V TW
- Full product name ST298Z In Driver 150W 48V 220-240V TW
- Full product code 872016950933799
- Order code 911401525242
- Material Nr. (12NC) 911401525242
- Numerator – Quantity Per Pack 1
- EAN/UPC – Product/Case 8720169509337
- Numerator – Packs per outer box 10
- EAN/UPC – Case 8720169508385
Dimensional drawing
ST307Z 150W PSU driver
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>