Azoula SR-ZG2833P Configurable Zigbee GP Switch User Guide
- June 1, 2024
- Azoula
Table of Contents
Azoula SR-ZG2833P Configurable Zigbee GP Switch
Product Information
- Specifications:
- Switch Type: Configurable Zigbee GP Switch
- Transmission Range: 10-30m (typical)
- Radio Frequency: 2.4GHz
- Power Supply: 3V (1xCR2430 battery)
- Buttons: 4
- Dimensions: 40x40x11.2mm
- Operating Temperature: -20°C to +45°C
- Working Humidity: 10% to 95% RH non-condensing
- Waterproof Grade: IP20
- Warranty: 5 years
Product Usage Instructions
- Product Description:
- The Zigbee push-button coupler is a 4-channel push-button interface for simple wall/flush type box installation.
- It can be used with existing switches and communicates with a compatible Zigbee hub.
- The switch is powered by a CR2430 battery and sends wireless signals to control the Zigbee system.
- Add the Switch to a Compatible Zigbee Hub
- Tap on the + button on the Home page.
- Tap on Zigbee-Green Power to add the Green Power switch.
- Tap on Switch (Key 4) and then tap on Start to add the 4-key Green Power switch.
- Follow the App instructions to operate the switch and add it to the App.
- Once added successfully, tap on Done to finish adding.
- The added switch will be displayed on the Home Page.
- Configure the Switch through a Compatible Zigbee Hub
- After adding the switch to the hub, navigate to the Smart Page of the Azoula Smart App to set Automation using the switch.
- Refer to the user manual of the Azoula Smart Hub for more information on setting automation.
FAQs
- Q: What type of battery does the switch use?
- A: The switch uses a CR2430 battery.
- Q: How many buttons does the switch have?
- A: The switch has 4 buttons for different actions.
- Q: What is the warranty period for the switch?
- A: The switch comes with a 5-year warranty.
Important: Read All Instructions Before Installation
Function Introduction
Product Data
Switch Type | Configurable Zigbee GP Switch |
---|---|
Transmission Range | 10-30m (typical) |
Radio Frequency | 2.4GHz |
Power Supply | 3V(1xCR2430 battery) |
Buttons | 4 |
Dimensions | 40x40x11.2mm |
Operating Temperature | -20 ℃ ~ +45℃ |
Working Humidity | 10% ~ 95% RH non-condensing |
Waterproof Grade | IP20 |
Warranty | 5 years |
Product Description
- The Zigbee push-button coupler is a 4-channel push-button interface for simple wall/flush type box installation.
- You can continue to use existing switches, irrespective of the manufacturer.
- It is a wireless transmitter that communicates with a compatible Zigbee hub. The coupler adopts a CR2430 battery to power a built-in transmitter.
- This transmitter sends wireless radio signals that are used to remotely control the compatible Zigbee system.
- The switch can be configured through the Zigbee App after being added to the Zigbee hub.
- This switch has four buttons to trigger different actions of designated devices or zones with 3 events: short press, double click, and long press.
- The action of each event and the controlled object of each button can be configured through the Zigbee App.
Safety & Warnings
- This device contains a button lithium battery that shall be stored and disposed of properly.
- DO NOT expose the device to moisture.
Corresponding button position of the 4 push buttons while commissioning using Azoula Smart App Push button wiring as follows:
- Push Button 1 connecting to terminal K1
- Push Button 2 connecting to terminal K2
- Push Button 3 connecting to terminal K3
- Push Button 4 connecting to terminal K4
Operations
- Add the Switch to a Compatible Zigbee Hub (For instance Azoula Smart Hub and Azoula Smart App)
- Step 1: tap on the “+” button on the “Home” page, then tap on “Zigbee-Green Power” to add Green Power switch.
- Step 2: tap on “Switch (Key 4)”, then tap on the “Start” button to add a 4 key Green Power switch.
- Step 3: Follow the instructions of the App to operate the switch and add it to the App.
- Step 4: Once added successfully, tap on the “Done” button to finish adding.
- Step 5: The added switch will be shown on the “Home” Page.
- Configure the switch through a Compatible Zigbee Hub (For instance Azoula Smart Hub and Azoula Smart App)
- After the switch is added to the hub, navigate to the “Smart” Page of the Azoula Smart App and you can use the switch to set “Automation”.
- Please refer to the user manual of Azoula Smart Hub to learn how to set automation using a green power switch.
Wiring Diagram
Installation
The key part of this controller is a universal, extremely rotary standard switch element that can be integrated into numerous frames by different manufacturers as below list:
BERKER | S1, B1, B3, B7 glass |
---|---|
GIRA | Standard55, E2, Event, Esprit |
JUNG | A500, Aplus |
MERTEN | M-smart, M-Arc, M-Plan |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>