Azoula AZ001-55 TV Backlight with HDMI Sync Box User Manual
- June 9, 2024
- Azoula
Table of Contents
TV Backlight with HDMI Sync Box
User Manual
AZ001-55
What’s in the Box
Installation Instructions
Cautions:
(a) Please install the strip light according to national standards and local
electrical codes.
(b) It is strictly forbidden to install this product with power on.
(c) Do not cut the strip light.
(d) Avoid bending the part with LED components so as not to damage the strip
light or shorten its service life.
(e) Remove nails, metal or conductive objects from the surface the strip light
will be installed on and keep it clean and dry before installation.
Installation
- Tear off the release paper from the back of the strip light, firmly stick it on the TV (from the bottom left) and reinforce with fixing clips at four corners.
- Connect the strip light to the control box, then plug the corresponding adapter into the control box.
- Connect the control box to the sync box, then plug the corresponding adapter into the sync box.
- Connect Apple TV, Blu-Ray player, or gaming console to HDMI IN port.
- Connect any output device such as a TV or monitor to the HDMI OUT port.
HDMI Sync Box
Features
- Support video resolution up to 4K@60Hz, HDR. (available only for HDMI-2.0, HDCP 2.2)
- 1 HDMI IN and 1 HDMI OUT for connecting to media devices.
- Support hot swap.
- Synchronize the color information of the images from the input device to the strip light to achieve the rendering effect via lighting.
Electrical parameters
Input Power | DC5V 1.5A |
---|---|
Power | 7W |
Data Interface | TYPE-C |
Certification | FCC / CE |
Adapter Parameters | Input: |
100-240V AC50/60HZ 0.3A
Output:
DC5V/1.5A
Software Function
- 1 HDMI input
- 1 HDMI output
- Support HDMI 1.4/2.0
- Support up to 4k@60Hz (available only for HDMI-2.0, HDCP 2.2)
- Support HDR
- Support HDR10+
- Support Dolby Vision
- Support HDCP1.4/2.2
- Supports the CEC (Consumer
Electronics Control) function.
Note: available only with output and input devices that support this function
Supported Frequency and Color Format
Note:
(a) This product maximum supports 38402160p (4K).
(b) This product does not support 25601440P (2K).
Color Format | Bit Depth | 24Hz | 25Hz | 30Hz | 50Hz | 60Hz |
---|---|---|---|---|---|---|
RGB | 8 | **** | **** | **** | **** | **** |
RGB | 10 | **** | **** | **** | **** | **** |
RGB | 12 | **** | **** | **** | **** | **** |
YCbCr444 | 8 | **** | **** | **** | **** | **** |
YCbCr444 | 10 | **** | **** | **** | **** | **** |
YCbCr444 | 12 | **** | **** | **** | **** | **** |
YCbCr422 | 8 | **** | **** | **** | **** | **** |
YCbCr422 | 10 | **** | **** | **** | **** | **** |
YCbCr422 | 12 | **** | **** | **** | **** | **** |
YCbCr420 | 8 | **** | **** | **** | **** | **** |
YCbCr420 | 10 | **** | **** | **** | **** | **** |
YCbCr420 | 12 | **** | **** | **** | **** | **** |
Control Box
Function of the Buttons
POWER:
Short press to turn ON/OFF the control box, the strip light will light up, and
the indicator light will always be green. Long press for more than 5s until
the green indicator light changes to red breathing light, then you can enter
the APP to match the light.
MODE:
Short press to switch between 8 local modes.
Long press for more than 3s to switch to music mode.
Input Power | DC12V |
---|---|
Protocol | WiFi |
Transmission Frequency | 2.4GHz |
Control Method | APP / Remote Control |
Wired Signal Synchronization | HDMI (USB interface) |
Output Power | DC12V |
Output Signal | SPI |
Connect to Smart Device
Make sure your smart device is connected to a secure 2.4GHz network.
2.4GHz network.
-
Download “Azoula Pixels” from Google Play or Apple App Store and install, then register as instructed.
-
Press POWER button once to turn on the strip light.
Long press for more than 5s until the green indicator light changes to red breathing light, then you can start to match the light. -
Open the App, follow the on-screen instructions to add your light.
-
Select 2.4GHz Wi-Fi network and enter password to complete connection.
Control with APP
To customize the lighting yourself, make sure that sync mode is not selected.
You can exit the sync mode on APP or by pressing on remote control.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled rolled environment. This device should be installed and operated
with a minimum distance of 20cm between the radiator and your body.
Smarter Light, Easier Life. Made in China
Email:support@azoula.com
For more details, please visit:www.azoula.com