SEALEY 9204 Value Safety Glasses Instruction Manual
- June 1, 2024
- SEALEY
Table of Contents
SEALEY 9204 Value Safety Glasses
Product Information
- Specifications
- This product is the Value Safety Glasses,
- Model No: 9204, meeting the standard BS EN 166.
- Optical Class: 1 – suitable for work with high vision requirements for permanent use.
- Mechanical Resistance: F – Low Energy Impact
Product Usage Instructions
- Safety
- This product is designed to provide eye protection against high-speed particles of low energy impact. It is lightweight and comfortable to wear.
- Avoid liquids as small particles can splash into the eyes.
- Inspect the glasses frequently for any damage. Do not use it if cracked or broken.
- Avoid placing the product on hot surfaces.
- Do not use the glasses for protection against electric sparks, fine dust, gas, UV or IR radiation, ionizing radiation, liquids under pressure, or heavy impact hazards.
- Maintenance
- Cleaning
- Do not use abrasive materials for cleaning.
- Use warm suds and a soft brush or cloth to clean the glasses. Ensure hands are clean.
- Disinfect contact areas regularly to avoid allergic reactions.
- Storage
- Store the glasses in a bag or case away from direct sunlight, chemicals, and abrasive substances in a clean, dust-free environment.
- Preferably use the original bag for transportation.
- Expiry Date
- The product shelf life is 5 years from the date of manufacture. Replace the product after this period.
FAQs
- Q: Can I use these glasses for protection against heavy impact hazards?
- A: No, these glasses are designed for low energy impact protection and should not be used against heavy impact hazards.
- Q: How should I clean the glasses?
- A: Clean the glasses using warm suds and a soft brush or cloth. Avoid abrasive materials for cleaning.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
REFER TO INSTRUCTIONS
IMPORTANT:
- PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
- USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
- KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
INTRODUCTION
- BS EN 166/F – Clear polycarbonate safety lens.
SAFETY
- This product is designed for eye protection against high-speed particles of low energy impact. They are designed to be lightweight and comfortable to wear.
- The product protects against high-speed particles but may transmit impacts, thus creating a hazard to the wearer.
- Avoid liquids as small particles can splash into the eyes.
- Inspect the glasses frequently as a pitted or scratched face shield reduces vision and should be replaced immediately.
- DO NOT use if any part of the glasses is cracked or broken.
- DO NOT place this product on a hot surface.
- DO NOT use these glasses for protection against short-circuit electric sparks, fine dust, gas, ultraviolet or infrared radiation, ionising radiation, liquids under pressure or other severe hazards.
- DO NOT use these against heavy impact hazards.
SPECIFICATION
This product meets the requirements of the standard BS EN 166.
- OPTICAL CLASS – 1 – suitable for work with high vision requirements for permanent use.
- MECHANICAL RESISTANCE – F – Low Energy Impact
MAINTENANCE
CLEANING
- DO NOT use abrasive materials.
- Using a soft and clean brush or cloth, use warm suds to wash and clean. Ensure hands are clean (without grease).
- Materials that may come into contact with the wearer’s skin could cause allergic reactions in susceptible individuals. The contact areas should be disinfected regularly.
STORAGE
- Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust-free environment.
- Use the original bag for transportation if possible.
EXPIRY DATE
- Product shelf life/expiry date is 5 years from the date of manufacture, after which the product should be replaced.
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
ENVIRONMENT PROTECTION
- Recycle unwanted materials instead of disposing of them as waste.
- All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner that is compatible with the environment.
- When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
REGISTER YOUR PURCHASE HERE
- Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and parts without prior notice.
- Important: No Liability is accepted for incorrect use of this product.
- Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.
CONTACT
- EU
- Sealey EU Ltd,
- Farney Street,
- Carrickmacross,
- Co. Monaghan,
- A81 PK68 Ireland
- UK
- Sealey Group,
- Kempson Way,
- Suffolk Business Park,
- Bury St Edmunds,
- Suffolk. IP32 7AR
- 01284 757500
- sales@sealey.co.uk.
- www.sealey.co.uk.
- © Jack Sealey Limited
- Original Language Version
- 9204
- Issue 3 (1) 12/12/23
- MODEL NO: 9204
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>