Meetion B0CXJ75MH3 Wireless Mouse User Manual

Meetion B0CXJ75MH3 Wireless Mouse

OVERVIEW

CONNECTION(MOUSE)

Open the battery compartment cover on the bottom of the mouse and insert an AA battery

Turn on the mouse power switch

Remove the USB receiver at the bottom of the mouse and close the battery compartment cover

Press the mode switch button to switch to 2.4G mode, and the light is green

Insert computer USB interface
(When the product is used for the first time, an automatic hardware installation prompt will pop up in the lower right corner of the computer)

BLUETOOTH CONNECTION(MOUSE)

Open the battery compartment cover on the bottom of the mouse and insert an AA battery

Turn on the mouse power switch, and close the battery case cover

Short press the mode switch button, switch to Bluetooth 1, then the blue light flashes you can perform code matching

Turn on the computer Bluetooth switch to enter the Bluetooth settings page

Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices

Find the device named Meetion_MS_BT2 and click on Add Pairing

Paired successfully

BLUETOOTH CONNECTION(MOUSE)

Open the battery compartment cover on the bottom of the mouse and insert an AA battery

Turn on the mouse power switch, and close the battery case cover

Short press the mode switch button, switch to Bluetooth 2, then the blue light flashes you can perform code matching

Turn on the computer Bluetooth switch to enter the Bluetooth settings page

Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices

Find the device named Meetion_MS_BT2 and click on Add Pairing

Paired successfully

DPI ADJUSTMENT (MOUSE)

Press the DPI button once, 800 DPI (slow cursor movement)

Press the DPI button again, 1200 DPI (cursor moves moderately)

Press the DPI button again for 1600 DPI (faster cursor movement)

GENERAL

All Products Under The Meet ion Brand Comply With
The Us FCC Standards With FCC Id: 2a706.
The Product Is Made In Accordance With Rohs Standard.

PRECAUTIONS

1. This product contains a lAAA battery, 2AA battery.
   (1) Do not dismantle, strike, crush, or put it into a fire.
   (2) Stop using it immediately if severe swelling occurs.
   (3) Do not place it in a high-temperature environment.
   2. Do not use this device near water.

2. Only use a dry cloth to clean this product.

3. Please follow the manufacturer’s instructions for use.

4. If the device is damaged, for example, if liquid enters it, if it gets wet in the rain or becomes damp, or if it cannot operate normally, it must be repaired. For repair matters, it should be entrusted to qualified maintenance personnel.

KLND TIPS

If the product will not be used for a long period of time, it is recommended to turn off the power switch of the keyboard and mouse, and to remove the batteries to prevent them from failing due to prolonged non-use.

CUSTOMER SUPPORT

TECHNICAL SUPPORT
Having technical problems with this product?
Send an email to service@meetion.com
For more information please visit:
www.meetion.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>