MEETION B0CRYQRGHL Mac Keyboard And Mouse Instruction Manual
- June 1, 2024
- MEETION
Table of Contents
MEETION B0CRYQRGHL Mac Keyboard And Mouse
MULTIMEDIA FUNCTION KEYS
CONNECTION (MOUSE)
- Open the accessory box and remove the receiver from it
- Turn on the mouse power switch
- Short press the mode switching button, the green light is on, and switch to the 2.4G channel
- Insert computer USB interface
CONNECTION(KEYBOARD)
- Turn on the keyboard power switch
- Short press “fn” and “2.4G” at the same time Green light is on, and switch to the 2.4G channel
- Insert computer USB interface
BLUETOOTH CONNECTION(mOUSE) 1
- Turn on the mouse power switch
- Short press the mode switching button, and the blue lamp lights up and switches to the Bluetooth 1 channel; Press and hold the button again for 3 seconds, and the blue light blinks to enter Bluetooth 1 pairing mode.
- Turn on the computer Bluetooth switch to enter the Bluetooth settings page
- Find the device named Meetion_MS_BT1 and click on Add Pairing
- Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
- Paired successfully
BLUETOOTH CONNECTION(MOUSE) 2
- Turn on the mouse power switch
- Short press the mode switching button, the blue lamp lights up and switches to the Bluetooth 2 channel; Press and hold the button again for 3 seconds, the blue light blinks to enter Bluetooth 2 pairing mode.
- Turn on the computer Bluetooth switchto enter the Bluetooth settings page
- Find the device named Meetion_MS_BT2 and click on Add Pairing
- Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
- Paired successfully
BLUETOOTH CONNECTION(mOUSE) 3
- Turn on the mouse power switch
- Short press the mode switching button, and the blue lamp lights up and switches to theBluetooth 3 channel; Press and hold the button again for 3 seconds, and the blue light blinks to enter Bluetooth 3 pairing mode.
- Turn on the computer Bluetooth switch to enter the Bluetooth settings page
- Find the device named Meetion_MS_BT3 and click on Add Pairing
- Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
- Paired successfully
BLUETOOTH CONNECTION(KEYBOARD) 1
- Turn on the keyboard power switch
- Short press “fn” and “Bluetooth 1” at the same time Blue light is on, so switch to Bluetooth 1 channel; Long press again for 3s, blue light flashes, enter Bluetooth 1 pairing mode
- Turn on the computer Bluetooth switch to enter the Bluetooth settings page
- Find the device named Meetion_MS_BT1 and click on Add Pairing
- Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
- Paired successfully
BLUETOOTH CONNECTION(KEYBOARD) 2
- Turn on the keyboard power switch
- Short press “fn” and “Bluetooth 2” at the same time Blue light is on, so switch to Bluetooth 2 channel; Long press again for 3s, blue light flashes, enter Bluetooth 2 pairing mode
- Turn on the computer Bluetooth switch to enter the Bluetooth settings page
- Find the device named Meetion_MS_BT2 and click on Add Pairing
- Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
- Paired successfully
BLUETOOTH CONNECTION(KEYBOARD) 3
- Turn on the keyboard power switch
- Short press “fn” and “Bluetooth 3” at the same time Blue light is on, so switch to Bluetooth 3 channel; Long press again for 3s, blue light flashes, enter Bluetooth 3 pairing mode
- Turn on the computer Bluetooth switch to enter the Bluetooth settings page
- Find the device named Meetion_MS_BT3 and click on Add Pairing trustworthy
- Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
- Paired successfully
CHARGE INDICATION (MOUSE)
- This red light is blinking, the battery is low
- This red light is always on, the battery is charging
- Red light is off, battery is fully charged
Note: The charging voltage should not exceed 5V, otherwise the product circuit will be damaged.
CHARGE INDICATION (KEYBOARD
- This red light is blinking, the battery is low
- This red light is always on, the battery is charging
- Red light is off, battery is fully charged
Note: The charging voltage should not exceed 5V, otherwise the product circuit will be damaged.
DPI ADJUSTMENT (MOUSE
- Press the DPI button once, 800 DPI (slow cursor movement)
- Press the DPI button again, 1200 DPI (cursor moves moderately)
- Press the DPI button again, 1600 DPI (faster cursor movement)
- Press the DPI button again, 2400 DPI (fastest cursor movement)
RECEIVER STOWAGE (MOUSE)
- Open the mouse button housing
- Place the receiver in the receiver compartment
- Cover the mouse button housing
GENERAL
All products under the MEETION brand comply with the US FCC standards withFCC
ID: 2A706.
The product is made in accordance with RoHS standard.
PRECAUTIONS
- This product contains a rechargeable lithium battery.
- Do not dismantle, strike, crush, or put it into a fire.
- Stop using it immediately if severe swelling occurs.
- Do not place it in a high-temperature environment.
- Do not use this device near water.
- Only use a dry cloth to clean this product.
- Please follow the manufacturer’s instructions for use.
- If the device is damaged, for example, if liquid enters it, if it gets wet in the rain or becomes damp, or if it cannot operate normally, it must be repaired. For repair matters, it should be entrusted to qualified maintenance personnel.
KIND TIPS
If the product is not in use for a long time, it is recommended to charge it
every three months to activate the lithium battery inside the product and
prevent battery failure due to long periods of non-use.
WARRANTY CARD
CONTACT
TECHNICAL SUPPORT
- Having technical problems with this product?
- Send an email to service@meetion.com
- For more information please visit:
- www.meetion.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>