Shenzhen Ky Technology G16 Smart Bracelet User Manual
- June 6, 2024
- Shenzhen Ky Technology
Table of Contents
Shenzhen Ky Technology G16 Smart Bracelet
Downloading the App
Scan the following QR code, download and install the App.
Charging and Active
Charging the device to act before the first time using: To charge your device, plug the charging cable into the adapter or USB port on your computer,
Pairing
The MAC address on the “Setting”-“Abouf’ page could help you identify your device on the scanning list,
Use the Touch Screen
SmartWatch Features
Sleep
If you keep wearing Smart Watch In your sleep , it can provide the hours slept and quality of sleep stats on both the screen and the APP. NOTE: Sleep stats reset to zero at 8:00 pm.
Heart Rate Test
The SmartWatch could record your heart rate all day. You also could tap on the page to start measuring heart rate.
Sports
Smart Watch automatically tracks Steps taken on the screen. NOTI:: Your movement stats reset to zero at midnight,
Training
Tap the training Icon on the menu to start a new training measure recording, there are 8 sport modes to be chosen. The last training recording will be shown on the training page.
Blood Pressure Test
Tap on the blood pressure page to start measuring your blood pressure. On the blood pressure page, It can show the blood pressure measurement data of the last times.
Sp02Test
Tap the SpO2 page to start measuring your Sp 02. On the SpO2 page, It can show the SpO2 measured data of the last times,
Weather
It could show the weather Info of current and tomorrow on the weather page. Weather info is synced after connecting with the APP. it will not be updated after a long disconnection.
Messages Reminder
The device can sync Incoming notifications from Twitter, Facebook, Whatsapp, Instagram etc. Recently 3 messages can be stored. Note: You can switch of/off the incoming notification in the APP.
Remote Shutter
After connecting the device.you can remote contral the camera on your phone.
Player Shutter
After connecting the device.you can remote central the music player on your phone.
Other Features
Other features Include a stopwatch, alarm, timer, brightness. mute on/off, the<!ter mode,factory reset. power off and about.
Stop Watch
Tap the sta n button on the stopwatch page to start timing, and tap the stop button to stop timing.
Silent Alarms
Set up the alarm on the APP, the device will vibrate to remind on time,
Theater Mode
The device wlll turn offtheV1bratlon and trun down the brightness when the theater mode is turned on. Note: You can turn on/off the theater mode in the control center.
Remind to Move
The deV1ce will Vibrate to remind you to make a relax after 1-hour of sitting. Note: You can switch on/off the feature in the APP.
Remind to Drink
The smartwatch will remind you of “Time to Drink Some Water” at the planned drinking time, Note: You can set the feature in tht APP.
Getting to Know Your Device
-
Using in Wet Conditions
Your device Is water-reslsL”!nt, which means It Is rain-proof and splash-proof and can stand up to even the sweatiest workout. NOTE: Do not swim with your Smart Bracelet, We also don’t re comm end s howerlng with y<i u r wristband; though the water won’t hurt the device, wearing it 24f7 does not give your skin a chance to breathe, Whenever you get your bracelet wet dry It thoroughly before putting It back on. -
Using Quick view
With Quick View, you can check the time or the message form your phone on your Smart Bracelet without L”lplng. Just turn your wrlst towards you and the time screen will appear for a few seconds.
General Info & Specifications
-
Environmental Conditions
Oper•tlng temperature: 14 F to 122 F (-1 o•c to SC”C) Non-operating temperature: -4’F to 140″F (-20’C to 60C) -
Size
Fits a wrist between 5,5 and 7.7 inches Tn circumference. -
Disposal and Recycling
Please kindly be aware that It Is the consumer’s responsibility to properly dispose of and recycle Smart Bracelet and accompanying components. Do not dispose of Smart Bracelet with common household waste, the Smart Bracelet unit is considered electronic waste and should be disposed of at your local electron le equipment collection facility. For more information, please contact your local electronic eq u lpment waste management a uthorlty or the reta lier where you bought the product.
FCC Statement
Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning:
Changes or modifications made to this device not expressly approved by Shenzhen KY Technology Co., Ltd may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF exposure statement:
The device compliance RF exposure requirement can be installed and used without restriction