MEETION B0CQM8SR5Q Wireless Bluetooth Keyboard for Mac User Manual
- June 16, 2024
- MEETION
Table of Contents
MEETION B0CQM8SR5Q Wireless Bluetooth Keyboard for Mac
MULTIMEDIA FUNCTION KEYS
2.4G connection(KEYBOARD)
-
Open the accessory box and remove the receiver from it
-
Turn on the keyboard power switch
-
Short press “fn” and “2.4G” at the same time Green light on, switch to 2_4G channel
-
Insert computer USB interface
-
4G CONNECTION(KEYBOARD)
-
Turn on the keyboard power switch
-
Short press “fn” and “Bluetooth 1” at the same time Blue light is on, switch to Bluetooth 1 channel; Long press again for 3s, blue light flashes, enter Bluetooth 1 pairing mode
-
Turn on the computer Bluetooth switch to enter the Bluetooth settings page Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
-
Find the device named Meetion_MS_BT1 Paired successfully and click on Add Pairing
-
BLUETOOTH connection(KEYBOARD)
-
Turn on the keyboard power switch
-
Short press “fn” and “Bluetooth 2” at the same time Blue light is on, switch to Bluetooth 2 channel; Long press again for 3s, blue light flashes, enter Bluetooth 2 pairing mode
-
Turn on the computer Bluetooth switch to enter the Bluetooth settings page Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
-
Find the device named Meetion_MS_BT2 and click on Add Pairing
Paired successfully -
BLUETOOTH connection(KEYBOARD) 3
-
Turn on the keyboard power switch
-
Short press “fn” and “Bluetooth 3” at the same time Blue light is on, switch to Bluetooth 3 channel; Long press again for 3s, blue light flashes, enter Bluetooth 3 pairing mode
-
Turn on the computer Bluetooth switch to enter the Bluetooth settings page Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
-
Find the device named Meetion_MS_BT3 and click on Add Pairing Paired successfully
CHARGE indication (KEYBOARD)
- low battery indicator
- This red light is blinking, the battery is low
- Charging indication
- This red light is always on, the battery is charging
- Battery full indication
- Red light is off, battery is fully charged
Note: The charging voltage should not exceed SV, otherwise the product circuit will be damaged.
General
All products under the ffiEETIOn brand comply with the US FCC standards with
FCC ID: 2A706. The product is made in accordance with RoHS standard.
Precaution’s
- This product contains a rechargeable lithium battery.
- Do not dismantle, strike, crush, or put it into a fire.
- Stop using it immediately if severe swelling occurs.
- Do not place it in a high-temperature environment.
- Do not use this device near water. only use a dry cloth to clean this product.
- Please follow the manufacturer’s instructions for use.
- If the device is damaged, for example, if liquid enters it, if it gets wet in the rain or becomes damp, or if it cannot operate normally, it must be repaired.
- For repair matters, it should be entrusted to qualified maintenance personnel.
Kind TIPS
If the product is not in use for a long time, it is recommended to charge it
every three months to activate the lithium battery inside the product and
prevent battery failure due to long periods of non-use.
TECHNICAL SUPPORT
Having technical problems with this product? Send an email to service@meetion.com
- For more information please visit: www.meetion.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>