PHILIPS BDP101 LED60 TownGuide Performer Bowl LED Instructions
- June 1, 2024
- Philips
Table of Contents
PHILIPS BDP101 LED60 TownGuide Performer Bowl LED Instructions
BDP101 LED60/740 DW PCF SI 62P
TOWNGUIDE PERF BOWL, LED module 6000 lm, 740 neutral white, Safety class I, Distribution wide, Polycarbonate bowl/ cover frosted, Silver, Post-top for diameter 62 mm.
The TownGuide Performer family consists of six recognizable, yet modern shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl). With an extensive range of lumen packages, neutral white or warm white LED lights sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project. All this combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energyreduction programs. This includes LumiStep, DynaDimmer, and LineSwitch standalone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with integrated gland located in the spigot, there’s no need to open the luminaire for installation. The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.
Product data
General Information
Lamp family code| LED60 [LED module 6000 lm]
Light source replaceable| Yes
Number of gear units| 1 unit
Driver included| Yes
Light source engine type| LED
Service tag| Yes
Product family code| BDP101 [TOWNGUIDE PERF BOWL]
Lighting Technology| LED
Value ladder| Performance
CE marK| Yes
Warranty period| 5 years
Flammability mark| –
ENEC mark| ENEC mark
EU RoHS complian| Yes
Serviceability class| Class A, luminaire is equipped with serviceable parts
(when applicable): LED board, driver, control units, surge protection device,
optics, front cover and mechanical parts
Light Technical
Upward light output ratio| 3
Luminous Flux| 3,420 lm
Standard tilt angle posttop| 0
Standard tilt angle side entry| –
Correlated Color Temperature (Nom)| 4000 K
Luminous Efficacy (rated) (Nom)| 88 lm/W
Color rendering index (CRI)| 70
Light source color| 740 neutral white
Optical cover type| Polycarbonate bowl/cover frosted
Luminaire light beam spread| 50° x 70°
Optic type outdoor| Distribution wide
Operating and Electrical|
Input Voltage| 220-240 V
Line Frequency| 50 to 60 Hz
Inrush current| 45 A
Inrush time| 0.285 ms
Power Consumptio| 39 W
Power Factor (Fraction)| 0.95
Connection| Screw connection block 5-pole
Cable| –
Number of products on MCB of 16 A type B| 10
Temperature
Ambient temperature range| -40 to +35 °C
Controls and Dimming
Dimmable| No
Driver/power unit/transformer| Power supply unit regulating
Control interface| –
Constant light output| No
Mechanical and Housing
Housing Material| Aluminum
Reflector material| –
Optic material| Acrylate
Optical cover material| Polycarbonate
Fixation material| Steel
Housing Color| Silver
Mounting device| Post-top for diameter 62 mm
Optical cover shape| Hemispherical flat
Optical cover finish| Frosted
Overall height| 293 mm
Overall diameter| 570 mm
Effective projected area| 0.095 m²
Approval and Application
Ingress protection code| IP66 [Dust penetration-protected, jetproof]
Mech. impact protection code| IK10 [20 J vandal-resistant]
Surge Protection (Common/Differential)| Luminaire surge protection level until
6 kV differential mode and 6 kV common mode
Sustainability rating| Lighting for circularity
Protection class IEC| Safety class I
Initial Performance (IEC Compliant)
Luminous flux tolerance| +/-7%
Initial chromaticity| (0.38, 0.38) SDCM <5
Power consumption tolerance| +/-10%
Init. Color Rendering Index Tolerance| +/-2
Over Time Performance (IEC Compliant)
Driver failure rate at 5000 h| 0.5 %
Control gear failure rate at median useful life 100000 h| 10 %
Lumen maintenance at median useful life 100000 h| 95
Application Conditions
Performance ambient temperature Tq| 25 °C
Maximum dim level| Not applicable
Product Data
Order product name| BDP101 LED60/740 DW PCF SI 62P
Full product name| BDP101 LED60/740 DW PCF SI 62P
Full product code| 871951405917700
Order code| 910925866484
Material Nr. (12NC)| 910925866484
Numerator – Quantity Per Pack| 1
EAN/UPC – Product/Case| 8719514059177
Numerator – Packs per outer box| 1
EAN/UPC – Case| 8719514059177
© 2024 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless
otherwise agreed by Signify. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>