LEFUN HEALTH C1 Smart Watch Instruction Manual

LEFUN HEALTH C1 Smart Watch

Product Information

Specifications

• Product Name : SmartWatch
• Proper Wearing : Wear on the styloid process of the ulna, adjust wrist size, and ensure sensors are tightly attached to the skin
• Charging: Connect charger if the device does not turn on due to low battery
• Compliance: FCC Part 15 Rules
• Radiation Exposure: Should be operated with a minimum distance of 0cm between the radiator and body

Product Usage Instructions

Properly Worn

The SmartWatch should be worn properly for optimal performance. Follow these steps:

1. Place the bracelet after the styloid process of the ulna on your wrist.
2. Adjust the wrist size by using the adjustment hole.
3. Buckle up the wrist strap securely.
4. Ensure that the sensors are tightly attached to the skin to prevent movement.

Charging the Watch

To charge the SmartWatch, follow these instructions:

1. Check the battery level before initial use to ensure it is normal.
2. If the watch cannot be turned on due to low battery, connect a charger to the device.
3. The watch will automatically turn on once it starts charging.

FAQ

• Q: What should I do if my SmartWatch does not turn on?
• A: If your SmartWatch does not turn on, it may have a low battery. Connect a charger to charge the device, and it should automatically turn on.
• Q: Where should I wear the SmartWatch for best results?
• A: The SmartWatch is best worn after the styloid process of the ulna on your wrist. Ensure the sensors are tightly attached to your skin to avoid movement.

Properly worn

The bracelet is best worn after the styloid process of the ulna. Adjust the wrist size according to the adjustment hole; Buckle up the wrist strap. Sensors should be tightly attached to the skin to avoid movement.

Charging the watch

Ensure that the watch’s battery level is normal during initial use. If it cannot be turned on due to low battery, please connect a charger to charge the device, and the watch will automatically turn on

Requirement of phones

• Android 4.2 or above
• lOS 8.0 or above
• Support BT4.0

Before Use

Please make sure that the electricity of the wristband is sufficient before your first use. If the electricity is too low to boot up, please charge for it first.

Download “LEFUN HEALTH” APP

• Method 1 : Scan the QR code (For Android users)
• Method 2 : Search “LEFUN HEALTH” from Apple Store or Android Market

Bind APP

• Long touch the key to boot up, please make sure the BT of your phone is open
• Open the “LEFUN HEALTH” APP in your phone — Click the menu bar on the top left corner — Click “Device name/connection status” — Choose MAC IMEl which matches your band

 Smart Band Operation

After the wristband is connected successfully, it will sync the time and date from your phone. APP can sync the motion state, such as Pedometer, Sleep monitor, Heart rate

Functions

• Home page: Display time, date power, etc
• Smart alarm clock: Set the clock in APP, it will shake to remind in time.
• Pedometer: Count your steps in a day, clear in 24 hours automatically, you can check the history steps in the APP.
• Calories: Count the consumption of calories, clear in 24 hours automatically, you can check the history in the APP.
• Mileage: Count the mileage, and clear it in 24 hours automatically, you can check the history in APP.
• Heart rate monitor: Switch to the interface of the Heart Rate Monitor, it will test automatically, and save the dates in the APP. monitor, Blood pressure, etc.
• Blood Pressure Monitor: Switch to the interface of the Blood Pressure Monitor, it will test automatically, and save the dates in the APP.
• Sleep Monitor: Open the function of sleep detection in Band, and detect your sleeping status in 24 hours. Save the dates in the APP.
• Sedentary reminder: In “Band function setting”, Turn on the function of Sedentary reminder and set the time, it will shake in time.
• Drinking reminder: In “Band function setting”, Turn on the function of drinking reminder and set the time, it will shake in time.
• Smart anti-lost: In the “Band function setting” ” turn on the function of smart anti-lost, the band will shake when the phone is over the distance of bluetooth
• Message notification: After the match is successful when the phone receives the message of QQ, wechat, and SMS, the band will brighten and shake.
• Incoming call reminder: After the match successfully when there is an incoming call, the band will show the contact message to remind.
• Shake for selfies: In the “Band function setting”, open this function, then click”Shake for selfie” in the menu bar, and shake the band to take the photo.
• Search device: Click “Search device” in the menu bar, band will shake to remind. The company reserves the right to make changes to the specification without notice.

FCC Statement

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>