MOD LIGHTING Luna Modern Wall Lamp Installation Guide
- June 12, 2024
- MOD LIGHTING
Table of Contents
MOD LIGHTING Luna Modern Wall Lamp
Luna Installation Guide
Modern Wall Lamp
The Luna Modern Wall Lamp is a stylish and contemporary lighting fixture that
can enhance the ambiance of any room. This installation guide provides step-
by-step instructions on how to properly install the wall lamp.
Installation Steps:
- Step 1: Draw marks on the wall with the hanging board as reference.
- Step 2: Use an electric drill to drill holes on the wall.
- Step 3: Tap the expansion screw into the drilled hole.
- Step 4: Fix the hanging plate on the expansion screw and tighten it with nuts.
Design Drawing:
Installation Notes:
- Suitable for 90-260V electrical systems.
- Ensure that the electricity is powered off before installation or cleaning.
- Please test the fixture before installing to ensure that there are no problems with the fixture itself.
- Wear gloves during the installation process to avoid scratches.
If you have any questions or experience any issues with your installation, please contact us via email at [email protected] for more help.
Installation Guide
Step 1: Draw marks on the wall with the hanging board as reference
Step 2: Use an electric drill to drill holes on the wall
Step 3: Tap the expansion screw into the drilled hole.
Step 4: Fix the hanging plate on the expansion screw and tighten it with nuts.
Design Drawing
Installation Notes
- Suitable for 90-260V.
- Make sure the electricity is powered off before installation or cleaning.
- Please test the fixture before installing to ensure that there is no problem with the fixture itself before installing onto the wall or ceiling.
- Please wear gloves during installation process to avoid scratches.
Installation Steps
- Fix the lamp hanging plate on the ceiling with accessory screws.
- Connect the lamp wire to the main power line.
- Install the lamp on the fixed hanging plate with screws.
If you have any questions or experience any issues with your installation, please contact us via email at [email protected] for more help.