Lighting Olympia F18 Multi Color RGBW Neon flex User Manual
- June 5, 2024
- Lighting Olympia
Table of Contents
- Lighting Olympia F18 Multi Color RGBW Neon flex
- Dimension
- Features
- Applications
- Model Encoding
- Technical Specification
- Wavelength
- Lumen Output
- Construction
- Physical Specification
- Mold injection connector
- Mold injection Connector
- Mold injection Jumper
- DIY Screw & Snap Connector Kit
- Other Accessories
- Mounting Channel
- Packing
- Testing
- Loading Chart
- Recommendation of extension wire
- Connection diagram
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Lighting Olympia F18 Multi Color RGBW Neon flex
Dimension
Features
- Uniform and even light output, three side emitting
- Flat surface with 260 degree beam angle
- 60 LEDs per meter, vertical bending
- Connect with Dali, DMX,PWM
- Full encapsulated with IP68 Level
- High Reliability
- 3 or 5 Years warranty
Applications
- Building facade, outline
- Cove lighting
- Sign and advertising lighting
- Linear lighting
- Additional lighting
- Decorative lighting
Model Encoding
Technical Specification
Model | F18-24V-5050-60-RGBW | F18-24V-5050-72-RGBW |
---|---|---|
Operating voltage | 24V | 24V |
Power consumption | 17W/M | 17W/M |
Working Mode | PWM CV | PWM CV |
LED type | SMD5050 | SMD5050 |
LED Quantity | 60 pcs/m | 72 pcs/m |
Available Color | RGBW(2200K/3000K/4000K) | RGBW(2200K/3000K/4000K) |
Min. cutting Unit | 6 LEDs | 6 LEDs |
Min. cutting length | 10cm | 8.33cm |
Max. length single feed | 8m | 8m |
Max. length double feed | 16m | 16m |
Bending direction | Vertically | |
Lumen maintenance | 70 000 Hours L70 25°C , 50 000 Hours L70 50°C | |
Housing material | Eco PVC or Silicone | |
Installation temperature | 0°C to +55°C | |
Ambient temperature | -25°C to +55°C | |
Ingress protection | IP68 wet location submersible* to 2m | |
Warranty | 3 years as standard, 5 years warranty maximum |
Wavelength
Lumen Output
Construction
Physical Specification
Mold injection connector
Mold injection Connector
Mold injection Jumper
DIY Screw & Snap Connector Kit
Other Accessories
Mounting Channel
Packing
Testing
- Please note it is under normal range if there is 20-30% yellowing of PVC housing material when the product is used under direct sunlight or long-term high temperature & wet enviroment in 3 years.
- About the tolerance range of optical parameters (luminance, CCT, Watt, RA) for all product, the volume is plus and minus 10% fluctuation refering to IEC Standard.
- It’s normal for the tolerance range in total length, it occurs from the different production technology, environmental temperature and installation. the volume would be 0.1-5M±7mm, 5.1-10M±15mm, 10.1-20M±30mm.
Loading Chart
Power supply
Rated power
|
35W
|
60W
|
75W
|
80W
|
100W
|
120W
|
150W
|
185W
|
240W
|
320W
---|---|---|---|---|---|---|---|---|---|---
17W
|
1.5m
|
2.5m
|
3.5m
|
3.8m
|
4.5m
|
5.5m
|
7m
|
8.5m
|
10m
|
/
Note: These are the max recommended run lengths based on the power supply
For example, It is recommended to use one 80W power supply for a single-feed
run of 3.8m at 17W/m.
Recommendation of extension wire
Maximum extension wire length according to Light power
Watts of light| 22AWG| 20AWG| 18AWG| 17AWG|
16AWG| 14AWG| 12AWG| 10AWG
---|---|---|---|---|---|---|---|---
| 0.34mm 2| 0.53mm 2| 0.82mm 2| 1.04mm 2| 1.38mm 2|
2.07mm 2| 3.29mm 2| 5.62mm 2
10W| 36m| 60m| 100m| 120m| 140m| 240m| 400m| 600m
20W| 18m| 30m| 50m| 60m| 70m| 120m| 200m| 300m
30W| 12m| 20m| 30m| 38m| 45m| 80m| 130m| 200m
40W| 8m| 15m| 22m| 28m| 35m| 60m| 95m| 140m
50W| 6m| 12m| 18m| 22m| 28m| 48m| 75m| 105m
60W| 5m| 10m| 15m| 18m| 22m| 36m| 60m| 88m
70W| /| 8m| 12m| 14m| 18m| 30m| 50m| 72m
80W| /| 6m| 10m| 11m| 14m| 24m| 40m| 58m
90W| /| 4m| 7m| 8m| 10m| 18m| 30m| 45m
100W| /| /| 5m| 6m| 7m| 12m| 22m| 32m
110W| /| /| 3m| 4m| 5m| 8m| 15m| 22m
120W| /| /| 2m| 2.5m| 3m| 0m| 8m| 12m
Note:
- The values don’t include the 0.6m cable connected to the front connector.
- To ensure the reliability of the wire connection and avoid the problem of voltage drop, the extension wire length should be smaller than the above-recommended values.
Connection diagram
Connection with DMX512 console or DMX512 Controller
Connection with DALI control Systems
For more information Email: info@olympialed.com Or visit www.olympialed.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>