PyleUSA PEDKITPRO62 Electronic Drum Set User Guide

: June 1, 2024
: PYLEUSA

PyleUSA PEDKITPRO62 Electronic Drum Set

USER GUIDE

What’s in the Box:

Electric Drum Set
Headphone,
Pair of Drumstick
Throne

Features

Pre-Loaded with Selectable Drum Kits & Songs
MIDI Support: Connect to Computer & Unlock More
Record Mode: Playback Your Drum Sessions
Hand Percussion Mode: Drop the Drumsticks & Use Your Hands
Effectively Reproduces Complete ‘Drum Set’ Sounds
Use Intelligent Dynamic Technology that Provides Realistic Sounds
Tom-Toms, Hi-Hat, Snare & Bass Drums, Crash & Ride Cymbals
Super Easy & Simple USB Plug-in Operation
Include a Pair of Drum Stick with a Throne
Front Panel Button Control Center
Built-in Full Range Stereo Speakers
Aux (3.5mm) Input Jack
Drum-Along to Music via Connected Device
Headphone Jack
Tempo & Volume Adjustable
Compatible with Mac & PC
Includes (2) Digital Foot Pedal Controllers

FUNCTION INTRODUCTION

Please read this manual carefully before using this instrument.

INTRODUCTION

This product is subject to change without notice

With 6 levels of strength that makes it closer to the original drum playing
Bass drum kick, snare drum, tom drum1-3, crash cymbal, ride cymbal, Hi-hat cymbal, Hi-hat control pedal
15 drum sets, 150 timbres
10 songs, 1 recording
Supports the sensitivity parameter adjustment of each drum
Speed control: 30 ~ 250 beats/minute
Metronome: 1 ~ 9 kinds
Other functions: parameter storage, reset and recording
Three digit LED display
Interface: power DC, usb midi, headset, audio input, audio output

Note:

This product is an electronic electro-acoustic musical instrument. It is normal that the speakers or earphones to have a little current sound after power ON.
During using, please stay away from “radio, TV, antenna receiver, router, refrigerator, TV, electrical appliances with motors and other sources of radio frequency electrical interference”.

INSTALLATION GUIDE

1. Check the enclosed items

After opening the package, please check immediately whether it contains all the parts or not. If there is anything missing, please contact with the dealer.

Part List

SAFETY PRECAUTION

2. Tom1 and tom2 installation

Install the tom1 and tom2 on the middle support bar.

3. Mounting stand

The stand must to be installed in place, and screw down the screws by the drum key.

stand

4. Cymbal installation

Attach the three cymbals to the cymbal arms as shown using the felt washers and cymbals nuts. Be sure not to tighten the cymbals too tightly and leave some space for them to shaking

Cymbal

5. Install the sound module snare drum and tom3 drum

Attach the sound module to the module bracket as following shown and clip in to place. Slide the snare and tom drums on to the drum support bar and tighten into place.

Install

6. Insert connection cable

Insert connection cable

SOUND MODULE PORT DIAGRAM

SOUND

1. Power Adapter Connection
1. Connect the power adapter as the shown gure, insert one end into the power port of the sound module, and insert the other end into a 100-240V household power port.
2. Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms.

2. USB MIDI port

1. This product has MIDI audio output / input function of USB port.
2. The drum device can be connected with MIDI in/out function through USB cable.
It can also be used as a hard sound source.
3. It can be used as MIDI device on any DAW software though the USB cable connect with the USB interface of PC or Mac. Or connect with the drum set game and electronic drum software which can supply the MIDI device.

Warm Tips: This product is a standard GM MIDI communication format, and the channel selected for MIDI signals is the default MIDI Channel 10 percussion channel. MIDI stands for Digital Musical Instrument Interface and is the most widely used music standard format in the arranger world. It uses digital control signals of musical notes to record music. Therefore, MIDI transmits not sound signals but instructions such as notes, control parameters, etc., through instructions to tell the MIDI device which note to play, the duration of the performance, the volume, etc.

3. Audio output socket
The audio output socket can be externally connected with active speakers (special drum speakers are required) and large audio equipment.

4. Sound module control switch
The sound module OFF/ON switch controls the opening and closing of the sound module.

5. Earphone jack
Connecting earphone can monitor the details of performance changes, and will not disturb others when the speaker is not connected.

Note:

In order to prevent failure or damage the equipment, please make sure the volume is low and turn on all the equipment before connecting.
External device is not the standard accessories, you should play for it if you want.

OPERATION GUIDE

1. Power
1. Slide the switch , the display will light up, and sound module is on
2. Slide the switch , the display goes out and sound module is turned o

2. Volume
Press the volume potentiometer to adjust the volume.

3. Drum kit selection
After startup, the default drum kit is displayed. You can directly press the “+” “-“key to switch your favorite drum kit (the position of the point below the number represents this mode).

4. Menu
Menu is used as the selection key to switch the kit/click/eq/efx parameter items.

5. Click setting
1. Press the menu key several times until the screen displays c.-4. At this time, the display position of the screen point is above the click, indicating that the metronome parameter adjustment mode is entered.

Press the “+” “-” key to switch the number of metronome beats.
Press to save the value and save it after power off.

Click is set with C-1/C-2/C-3/C-4/C-5/C-6/C-7/C-8/C-9

Click

2. C stands for click metronome, 9 groups of metronome types
3. C-1 is 1/4 beat, C-2 is 2/4 beat, and so on (the default is C-4, 4/4 beat)

6. Kit settings
The boot defaults to kit setting. Directly press the “+” “-” key to switch the drum kit, or press the menu key several times to display the display number (drum kit serial number) and press the “+” “-” key to switch the drum kit

7. EQ setting
Press the menu key several times until the screen displays at this time, the display position of the screen point is above EQ, indicating that it enters the reverberation parameter adjustment mode. Press the “+” “-” key to choose EQ settings, and the EQ parameters are set to (EQ low, EQ middle, EQ high)
The display is respectively, and the default is E-2.

8. EFX settings
1. Press the menu key several times until the screen displays .
At this time, the display position of the screen point is above the EFX, indicating that the reverberation parameter adjustment mode is entered.
Press the “+” “-” key to switch the EFX setting
2. EFX parameters are set to reverse (room, plate, Hall) respectively.
The display is f-1/f-2/f-3 (the default is F-1), and the three effects are fixed parameters.

9. Recording and playing function

1. Press rec to start recording, and the screen displays flashing.
In order to wait for the recording process, wait for the drum to trigger.
The first time is to start recording, the metronome sounds, and the screen displays . At this time, recording begins
2. Press rec key again to stop recording .

10. Click function
1. Press the click button, the light will light up, and the metronome will sound at the same time. Press the second time to turn o the metronome sound.
2. In click mode, press to adjust the metronome speed.
The parameter is 30-250, and the default is 120.

11. Demo song function

1. Press the demo button, the light will light up, and the demo song will sound at the same time. Press the second time to turn o the demo function.
2. In demo mode, press the “+” “-” key to select demo songs. There are 10 kits of demo songs, which can be played at the same time when selected.

12. Drum parameter setting

1. Press and hold menu to enter the drum parameter setting interface
2. Press the < + > < – > key to select the parameters to be set:
S (drum sensitivity), T (drum threshold), C (crosstalk value),
R (repeated trigger value), U (force curve), l (drum volume).
3. Brieflyy press menu to enter the parameter adjustment. At this time, the interface flashes (you can tap the drum and select the drum to be adjusted).
Press the < + > < – > key to adjust the parameters.
4. After adjusting the parameters, brieflyy press menu to exit the parameter adjustment, return to the drum setting interface, and select other parameters to be adjusted. At this time, the interface stops fashing
5. Press and hold menu to exit the drum parameter setting interface.

13. Parameter saving and resetting
1. Press and hold the rec button for 2 seconds to save the current setting, and SAV will be displayed after saving successfully.
2. Press and hold the replace button for 2 seconds to restore the factory settings, and successfully display the res MIDI function.
The USB interface outputs standard MIDI signals, supporting Android, apple, Microsoft system tablets and computers.

APPENDIX

Drum timbre

PRODUCT MAINTENANCE

Careful maintenance and protection of this product plays an important role in prolonging the service life of the product and reducing the failure.

1. AVOID HEATING, DAMPNESS OR DIRECT SUNLIGHT
Do not over expose the product to direct sunlight, or place it near air conditioning or extremely hot place.

2. DO NOT USE NEAR THE TV OR RADIO
This product may cause video or audio interference to the reception of TV and radio. If this happens, the product should be removed from the TV or radio.

3. NO DILUENTS OR SIMILAR CHEMICALS SHOULD BE USED FOR CLEANING

Clean the product with a soft cloth wetted with weak water solution and neutral detergent. Soak the cloth in a solution and wring it dry until it approaches drying.

4. DO NOT SHAKE, AVOID COLLISION

When moving, the product should be handled carefully and lightly. Violent vibra-tion and collision are strictly prohibited in order to avoid damage to the shell or internal electronic components.

SAFETY PRECAUTIONS

POWER SUPPLY
This product can be powered by standard indoor wall sockets. Only use the power cord specified in this product. When not in use, please turn off the power supply. When not in use for a long time, pull out the power cord and keep it properly.

POWER SUPPLY

SIGN
To ensure that you use this product safely and correctly, to prevent harm to users and others and financial damage, this manual and products are marked with a series of safety signs. The various signs and their meanings are as follows:

WARNING
This sign indicates that there is a potential risk of death or serious injury if this mark is ignored and the product is mishandled.

BE CAREFUL
This sign indicates that there is a potential danger of injury to personnel or other nancial damage if this sign is ignored and the product is operated incorrectly.

EXAMPLE OF LOGO

This triangle sign indicates what users should pay attention to. Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards.

A circular sign with an oblique line indicates prohibitions.
The icons in or beside the logo indicate the contents specifically prohibited. (The example on the left is no disassembly)

The round black bottom sign indicates what must be observed.
The diagrams in this sign indicate the contents of the specific matters that must be observed. (The example on the left is that the power plug must be pulled out of the socket)

WARNING
Smoke, odor, overheating
When the product smokes, smells or overheats, there is a danger of fire and electric shock when it is used continually. In case of the above situation, the following operations should be performed immediately:

1. Turn off the power supply.
2. Pull the plug out of the power outlet.
3. Contact your dealer.

Power cord

1. The improper use of power cord may cause fire and electric shock.

The following precautions must be observed:

The special power cord designated for this product must be used.
The AC power supply with output voltage within the rated voltage range for household use must be use
Do not overload power sockets and extension lines.

2. The improper treatment of power line will lead to its damage or breakage, which will cause fire and electric shock hazards. The following precautions must be observed:

Do not place or heat heavy objects on power lines.
Do not attempt to alter or bend the power cord too much.
Do not twist or pull the power cord.
If the power cord or plug is damaged, please replace the same type of power cord.

3. Do not touch the power cord and plug with wet hands, otherwise there is a danger of electric shock.

4. Please use the power cord where the water will not splash. Water is in danger of causing fire and electric shock.

5. Never place vases or any other container containing water on this product. Water is dangerous of causing fire and electric shock.
6. Do not allow minors to unplug and touch power lines or connection boards. Minors have no common sense of electricity safety, which may cause electric shock.

BE CAREFUL
The improper use of power cord may cause fire and electric shock. The following precautions must be observed:

Never put the power cord near the oven or other heat source.
Do not pull the cable when pulling out of the power socket.
The main body of the plug must be grasped.
The power cord plug must be inserted in the socket to the end.
Make sure the power supply is off before connecting or disconnecting it.
When thunderstorms occur or before traveling or other long-term departure, disconnect the power cord from the wall outlet.
At least once a year, remove the power cord from the wall outlet and clean the dust accumulated around the plug.

Do not burn this product

Do not put this product in the fire, otherwise it will lead to product combustion and explosion of internal electronic components, which will cause fire and person-nel injury.

Water and foreign bodies

Water, other liquids and (metal sheets, etc.) entering this product are in danger of causing fire and electric shock. In case of the above situation, the following operations shall be performed immediately:

1. Turn off the power supply.
2. If you are using a power cord for power supply, unplug it from the wall outlet.
3. Contact your distributor.

Disassembly and transformation

Do not disassemble or transform the product in any way, otherwise there is a risk of electric shock, scald or other personal injury. All internal inspection, adjustment and maintenance operations should be entrusted to your distributor.

Falling or colliding

If the product falls or is damaged by strong impact, it will be in danger of causing re and electric shock. In case of the above situation, the following operations shall be performed immediately:

1. Turn off the power supply.
2. If you are using a power cord for power supply, you need to unplug it from the wall outlet.
3. Contact your distributor.

Plastic bag

Do not let anyone put plastic bags for this product on his head or in his mouth. Otherwise, there is a risk of asphyxia. Families with young children should pay special attention to it.
Keep your distance from the product and the bracket
Climbing the bracket is dangerous of overturning or damage. Families with young children should pay special attention to it.

Set Up

DO NOT set up the product on an uneven surface or any other unstable place. Otherwise, it will cause the product to fall down, which will lead to risk of injury.

Product Mobility

Before moving this product, you must unplug the power cord plug from the wall outlet and pull out all other cables and connecting wires. Otherwise, it will lead to damage of power or connection wires, resulting in fire and electric shock.

Cleaning

Before cleaning this product, you must unplug the power cord plug from the wall outlet, otherwise there is a risk of fire and electric shock.

Jack

The socket of this product can only be connected to the designated equipment and devices. Connecting non-designated equipment or devices is dangerous of causing re and electric shock.

Location selection

It should be avoided to place the product in the following places, otherwise there is a risk of re and electric shock.

High temperature or dusty places.
Kitchen or other places with lampblack.
Where the product is exposed to direct sunlight, or any other place where the product will produce high temperature.

Volume

Don’t play music long and loud. Pay special attention when using headphones.
Excessive volume can damage your hearing.

Heavy

Do not place heavy objects on this product. Otherwise, the top of the product will be overweight, causing the product to overturn or drop objects on it, which will lead to the risk of injury.

Correct assembly of scaffolds

The incorrect assembly of the bracket may overturn, causing the product to fall off and posing a risk of injury to personnel.
Therefore, it must be assembled according to the instructions in the attached
installation guide to ensure that the product is properly mounted on its bracket.

Technical Specs:

Construction Material: Alloy Steel, Plastic, and Silica Gel
Drum Kits: (180) Sound Styles
Power Connection: DC 12V
Snare Drum – 7″ inches Single Triggers
Tom Drums – 7″ inches Single Triggers
Hi-Hat – 9″ inches, Single Triggers
Crash – 9″ inches, Single Triggers
Ride – 9″ inches, Single Triggers
Drum Sticks Dimensions: 0.6’’ x 16’’ –inches

Register Product

Thank you for choosing PyleUSA. By registering your product, you ensure that you receive the full benefints of our exclusive warranty and personalized customer support.

Complete the form to access expert support and to keep your PyleUSA purchase in perfect condition.

PyleUSA.com/register

Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
PyleUSA.com/ContactUs

Specifications:

Product: Electronic electro-acoustic musical instrument
Brand: PyleUSA
Power Adapter: 100-240V
Components: Sound module, Cymbals, Drum pads, Drum key, Drum stool, Headphone, Pedals, Drumsticks, Connection cables, Crash/Ride cymbal arm, Hi-hat cymbal arm, Velcro, Risers, Support bars

FAQ:

Q: Why do I hear a current sound from the speakers or earphones after

powering ON?

A: It is normal for electronic instruments to produce a slight current sound initially. Ensure to stay away from sources of radio frequency electrical interference during use.