PyleUSA Plywood Violin Stringed Instrument PGVILN20 Instruction Manual

June 6, 2024
PYLEUSA

PyleUSA Plywood Violin Stringed Instrument PGVILN20 -
logo
PGVILN20
Plywood Violin Stringed
Instrument
Student Grade Violin with Accessory Kit Included
Instruction Manual

First-time players will achieve the best results by bringing the violin to a music teacher to assist with the initial assembly.
Please read through the manual below to familiarize yourself with your new instrument. If damaged goods are found, the wrong item was received, exchange or refund in required, please email your seller immediately.

Getting Started

You must assemble and tune your new violin prior to playing. If you have a violin instructor we recommend you see him/her to assist you with assembling, cleaning, and tuning your instrument for the first time. If you cannot wait, follow these steps:

  1. BRIDGE: The bridge is preset before we ship out the violin; however, since it is not permanently glued on, and it’s held down by the tension of the strings only, it might come off or misalign during shipment. If that happens, please reinsert the bridge into the proper position. Keep in mind that not all players have the same size hands and fingers. Some violins come with the bridge not set at the correct height for the player and need to be adjusted. If this is the case then a professional luthier should adjust the bridge to get it comfortable to play.
    PyleUSA Plywood Violin Stringed Instrument PGVILN20 - figure
1

  2. STRINGS: Gradually tighten each string in the sequence of G-D-A-E. The reason for starting from the G string is to prevent damaging the thinner E and A strings. Tighten only 1-2 notes higher on one string at a time. Then tighten the next. Do not tighten one string all the way to the desired pitch while leaving the other strings very loose. This will create unequal pressure on the bridge causing it to fall.
    PyleUSA Plywood Violin Stringed Instrument PGVILN20 - figure
3

  3. PEGS: The pegs can be shrink or expand due to the temperature and humidity changes.
    When the peg shrinks, it will not fit the peg hole as well as they were originally made. It will leave a little gap between the peg and peg hole. This is why the strings slip.  Simply apply the rosin powder or peg drop oil (which you can get from the retail store) on the pegs and peg hole. This will all the little gap in between and increase the friction.
    PyleUSA Plywood Violin Stringed Instrument PGVILN20 - figure
4

  4. BOW: Floss the bow with Rosin for at least 5-10 minutes until you see the white powders come out from the horsehair before it can make a sound.
    PyleUSA Plywood Violin Stringed Instrument PGVILN20 - figure
5

  5. SOUND POST: It is not in a fixed position but is held in place by being a custom fit to match the curvature of your instrument. During shipping, it is possible for the sound post to come loose or dislodge itself. If this happens, please see a local luthier or repair technician.
    PyleUSA Plywood Violin Stringed Instrument PGVILN20 - figure
2

Features:

  • High-Quality Piano Code
  • Wood Grain Visible
  • Double F Control Uniform Symmetry
  • Set Up and Ready to Play
  • Lightweight and Smooth Finish
  • 80% Glossy and 20% Matt
  • Plywood Body with Nice Flames Veneer on Top, Back & Side
  • Dyed Hardwood Fingerboard & Chin Rest, Metal Tailpiece
  • Ebonized Pegs and Nut
  • Includes Student Foamed Triangle Case and Student Bow
  • With Rosin and Bridge
  • Metal Pull Plate
  • Durable and Fine Tuning to Ensure Standard Tuning

What’s in the Box:

  • Violin
  • Extra Set of String
  • Tuner
  • Shoulder Rest
  • Cleaning cloth

Digital Violin Tuner:

  • Convenient Clip-on Design
  • Tuning Range: A0 – C8 (27.5 – 4186 Hz)
  • Response Time: <20ms
  • Used for Stringed Instruments: Guitars, Bass, Violins, Ukuleles
  • Battery Powered Tuner: Requires (1) x Button Cell (CR-2032), Included
  • Tuner Size: 2.4’’ x 1.0’’ x 2.0’’ -inches

Technical Specs:

  • Bow Frog Material: Ebony.
  • Panel Material: Splint.
  • Side Panel Material: Maple
  • Pull String Material: Metal.
  • Total Violin Length: 23.6” -inches.
  • Headstock Material: Maple.
  • Fretboard/Fingerboard Material: Maple.
  • String Material: Steel.
  • Product Dimension (L x W x H): 23.6” x 8.3” x 3.4” -inches.

Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: [email protected]
www.PyleUSA.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

PYLEUSA User Manuals

Related Manuals