yuehemei YHM Q2 Open Ear Stereo Headphones User Guide

June 1, 2024
yuehemei

yuehemei YHM Q2 Open Ear Stereo Headphones User Guide

yuehemei YHM Q2 Open Ear Stereo Headphones User Guide

Product Information

Product Overview

yuehemei YHM Q2 Open Ear Stereo Headphones - Product
Overview

Packing List

yuehemei YHM Q2 Open Ear Stereo Headphones - Packing
List

Quick Start Guide

  1. Open the case, take out the earbuds, remove sticky tapes on the back of earbuds.
    Attention
    Please tear off the protective film before use, otherwise the headset will not be charged.

  2. Put back the earbuds into the case, make sure the lights of earbuds are on.

  3. Turn on the Bluetooth of smartphone to search the Bluetooth device.

  4. Find the device name of “YHM Q2”, connect it.

  5. Wear the earbuds as shown below, enjoy it!

Power on/off

yuehemei YHM Q2 Open Ear Stereo Headphones - Power on
off

Bluetooth Connection

yuehemei YHM Q2 Open Ear Stereo Headphones - Bluetooth
Connection

Operation Instructions for earbud buttons

yuehemei YHM Q2 Open Ear Stereo Headphones - Operation Instructions for
earbud buttons

Charging

*Charging the charging case properly with type-c cord.

  • Prior to first use (or not in use for longtime), please charge both earbuds and charging case fully.
  • If earbud’s battery is lower than 20% (and the voltage is below 3.4V), you will hear alert tone serveral times and then “power off” in turns.
  • The fully charged charging case can recharge twins earbuds for about 4 times without being plugged into power supply.

yuehemei YHM Q2 Open Ear Stereo Headphones - The fully charged charging case
can recharge twins earbuds

Specification Parameters

yuehemei YHM Q2 Open Ear Stereo Headphones - Specification
Parameters

Security Information

  • Using a charging cable that is not approved by the manufacturer may cause fire, explosion or other dangers.
  • Do not dismantle or repair or modify this product for any reason,otherwise it may lead to fire electronic breakdown or even complete damage to this product.
  • Please use this equipment in the temperature range of 0°C~35°C,and store the equipment and its accessories in the range of-10 ° C~45 ° C. When the ambient temperature is too low or too high,it may cause equipment failure. When the charging temperature exceeds the temperature range, it can’t be charged after flashing for 3 times.
  • If charging is finished, please disconnect the charger from this product, and the continuous charging time should not exceed 12 hours.
  • Please don’t wet the product with liquid or soak it in liquid.
  • This product is built-in with a non-removable lithium battery. It is forbidden to disassemble, impact, squeeze or throw the battery into the fire. If there is serious expansion, please do not use it intermittently.
  • Do not put the magnetic charging cable or the magnetic charging port of the earphone near the metal object. The magnet is attracted to the metal object, which may cause the contact to be shorted and lead to danger,so as to avoid persona injury such as scald and burn caused by overheating of the battery.
  • Do not put this product or battery into fire, otherwise it will cause fire or explosion.
  • Don’t expose the earphone to the sun for a long time, otherwise it will be easily deformed, aged and broken.

Email:support@yuehemei.com

Web:www.yuehemei.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals