The Home Depot W1340137045 Lights and Remote Control Green Caged Low Profile Ceiling Instruction Manual

The Home Depot W1340137045 Lights and Remote Control Green Caged Low

Profile Ceiling

User Manual

Size :

Fan lamp remote control instructions

Remote control instructions

1. If the remote control is not used for a long time, Please remove the battery.
2. Remote control matching code : Turn on the power, Press the pair code button within 5 seconds of the light on,

When you hear two “tick” sound or the light flashes, the code matches successfully.
If you need to match the code again, You need to wait 30 seconds before turning on the power and repeat the above operation.

Installation instructions:

1. Please confirm whether the voltage is consistent with the product, and turn off the power supply at the installation position to ensure safety.

2. Screw the hanging plate to the ceiling correctly

3. Connect the lamp drive input to the power supply correctly and firmly

4. Rotate the lamp body to make the screw of the hanging plate correspond to the hole of the leftmost hub

5. Tighten the four screws of the mounting plate to ensure that the lamp is firmly installed.

6. Tum on the power switch

Precautions

• Do not disassemble and modify the goods by yourself to avoid electric shock
• Do not use the product in high temperatures,high humidity or outdoor places.
• Please clean the lamps with a dry soft cloth, and do not wipe the lamps with corrosive detergent.
• Do not use multiple electrical appliances in the same socket at tha Same time to avoid short circuit or fire.
• During cleaning and maintenance,the operating instructions and pre­cautions should be followed to avoid the danger of electricity.
• Pay attention to the condition of ceiling fan lights at any time. If there is any malfunction. stop using them immediately and contact the mainte­nance station designated by the manufacturer for maintenance. Do not replace parts or disassemble and repair them by yourself and pay atten­tion to regular maintenance to ensure safe use.

ency treatment method

Please immediately turn off the power supply and stop using it in the fol­lowing situations:

• When the main lamp is wet or comes into contact with liquid/rain
• When the mein lamp falls and is damaged.
• Smoke, sparks, etc. occur in the ontology camps.
• LED light source flashes abnormally or is damaged.

Packaging accessories

• Fan lamp body*1
• Instructions (assembly instructions)
• Remote control
• Parts package

Warning

This appliance is not intended to be used by users (including children) with insufficient physiology, awareness mental ability, experience or knowledge unless it is safely used under the supervision or guidance of those responsible for the safety of women and children. electrical appliances. This appliance should be installed with fan lights according to the instructions, and adhesive is not allowed. When installing electrical appliances, the fan blades should be more than 2.3m above the ground(for electric fans installed at high places).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>