UNBRANDED TSMZ01-004A Wood Beaded Chandelier with Fan Lamp User Manual
- June 1, 2024
- UNBRANDED
Table of Contents
TSMZ01 – 004A
User Manual
TSMZ01-004A Wood Beaded Chandelier with Fan Lamp
Size:
Fan lamp remote control instructions
Remote control key function:
:Main switch
:Light switch
:Natural wind
:Fan off
:Fan gear key Gear 1-6 Forward
:rotation
:reversal
:Fixed time 1 hour
:Fixed time 2 hours+pair key
:Fixed time 4 hours
Remote control battery : No. 71.5V*2
Remote control instructions :
- If the remote control is not used for a long time , Please remove the battery,
- Remote control matching code :
Turn on the power , Press the pair code button within 5 seconds of the light on, When you hear two’tick” sound or the light flashes, the code matches successfully, If you need to match the code again , You need to wait 30 seconds before turning on the power and repeat the above operation,
Installation Instructions
- Please confirm whether the voltage is consistent with the product, and turn off the power supply at the installation position to ensure safety.
- Screw the hanging plate to the ceiling correctly.
- Connect the lamp drive input to the power supply correctly and firmly.
- Rotate the lamp body to make the screw of the hanging plate correspond to the hole of the leftmost hub.
- Tighten the four screws of the mounting plate to ensure that the lamp is firmly installed.
- Install four e26 t45 bulbs.
- Fix with screws for locking 4Pcs M3x10.
- Turn on the power switch.
Precautions:
Do not disassemble and modity the goods by yoursef to avoid electric shock
Do not use the product in high temperature,high humidity or outdoor places.
Please clean the lamps with a dry soft cloth, and do not wipe the lamps with
corrosive detergent.
Do not use multiple electrical appliances in the same socket at tha Same tima
to avoid short circuit or fire.
During cleaning and maintenance,the operating instructions and precautions
should be followed to avoid the danger of electricity.
Payattention to the condition ofceiling fan lights atany time.If there is dny
malfunction. stop using them immediately and contact the maintenance station
desipnated by the manuracturer for mainenance. Do not replace parts or
disassembie and repair them by yourself and pay attention to regular
maintenance to ensure safe use.
ency treatment method:
Please immediately turn off the power supply and stop using it in the
following situations:
When the main larmp is wet or comes into contact with liquid/rain
When the mein lamp falls and is damaged.
Smoke, sparks, etc. occur in the ontology iamps.
LED light source flashes abnormally or is damaged.
Packaging Accessories:
Fan lamp body*1
Instructions (assembly instructions)
Remote control
Parts package
Warning:
This appliance is not intended to be used by users (including children)
with insufficient physiology,awareness mental ability,experience or knowledge,
unless it is safely used under the supervision or guidance of those
responsible for the safety of women and children erectrical appliances.
This appliance shouid be installed with fan lights according to the
instructions,and adhesive is not allowed.
When installing electrical appliances,the fan blades should be more than 2.3m
above the ground(for electric fans installed at high places).