Aviation SE02352CH Cleanable Oil Filter Instruction Manual
- June 1, 2024
- Aviation
Table of Contents
Aviation SE02352CH Cleanable Oil Filter
Product Information
Specifications
- Model: Cleanable Oil Filter
- STC No.: SE02352CH
- Revision: C
- Date: 11/28/2023
- Torque Value: 16-18 N lb
Product Usage Instructions
-
Removal of Existing Oil Filter:
- Remove the existing oil filter from the engine.
-
Lubrication:
- Lubricate Challenger’s cleanable oil filter mounting O-ring with clean engine oil.
- Ensure hands and oil filter exterior surfaces are clean and free of grease or oil.
-
Installation:
- Install or remount the Challenger’s oil filter onto the engine or the engine oil filter adapter.
- Hand-tighten the oil filter until snug, then secure it by setting the torque value within the range of 16-18 N lb.
Do not over-tighten.
-
Final Checks:
- Run the engine and check for oil leaks.
- Safety wire the filter using drilled holes in the top cooling fin.
For product support, contact Challenger Aviation at 937-387-6500 or email info@challengeraviation.com
FAQ:
Q: How often should the cleanable oil filter be replaced?
- A: The cleanable oil filter is reusable and should be cleaned and inspected regularly as per manufacturer recommendations.
Q: What type of engine oil should be used for lubricating the O-ring?
- A: Use clean engine oil to lubricate the Challenger’s cleanable oil filter mounting O-ring.
INSTALLATION INSTRUCTIONS
STC No. SE02352CH #1124 REVISION C DATED 11/28/2023 CLEANABLE OIL FILTER INSTALLATION INSTRUCTIONS
- Remove the existing oil filter from the engine
- Lubricate Challenger’s cleanable oil filter mounting O-ring with clean engine oil.
- Note: INSTALL FILTER WITH CLEAN HANDS AND CLEAN OIL FILTER EXTERIOR SURFACE, FREE OF GREASE OF OIL.”
- Install or remount the Challenger’s oil filter onto the engine or the engine oil filter adapter.
- Tighten the oil filter by hand until getting tight, then secure the oil filter by setting the torque value at 16-18 ft Ib. Note: ‘DO NOT OVER TIGHTEN.”
- Run the engine and check for oil leaks and safety wire filter using drilled holes in the top cooling fin.
Call Challenger Avia, for product support at 937-387-6500 or email info@challengeraviation.com
Documents / Resources
|
Aviation SE02352CH Cleanable Oil
Filter
[pdf] Instruction Manual
SE02352CH Cleanable Oil Filter, SE02352CH, Cleanable Oil Filter, Oil Filter
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>