ingenuity 10247-ES Swing Go Portable Swing User Manual

ingenuity 10247-ES Swing Go Portable Swing

Product Information

• Specifications
  • Brand: Swing ‘n Go Portable SwingTM
  • Model: Hugs & HootsTM
  • Manufacturer Website: ingenuitybaby.com.
  • Battery Requirement: (4) size D/LR20 (1.5V) alkaline batteries (not included)

Product Usage Instructions

• Battery Installation
  • Open the battery compartment located on the swing control module.
  • Insert four size D/LR20 alkaline batteries into the compartment following the correct polarity.
  • Close the battery compartment securely.
• Assembly
  • Follow the parts list and assembly instructions provided in the manual to assemble the swing correctly.
• Using the Swing Control Module
  • Swing Timer Select Button and Indicator
  • Low Battery Indicator (red)
• Volume Control Switch
  • Speed Selector Button and Indicator
• Power Switch
  • Nature Sounds/ Music Button

FAQs

• Q: Can the swing be used without batteries?
  • A: No, the swing requires (4) size D/LR20 alkaline batteries to function.
• Q: How do I clean the swing seat?
  • A: The seat pad can be removed and hand-washed with mild detergent and air-dried.

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

Warning

• FALL and STRANGULATION HAZARDS: Infants have suffered head injuries falling from swings and have strangled in straps.
• ALWAYS use the restraint system. Adjust to fit snugly.
• STOP using the product when the infant attempts to climb out (approximately 9 months).
• DO NOT use this product once your child can sit up unaided or weighs more than 9 kg/20 lbs. DO NOT use this product if your child weighs less than 3kg/6 lbs.
• Stay near and watch the baby during use. This product is not safe for sleep or unsupervised use. If the baby falls asleep, remove the baby as soon as possible and place the baby on a firm, flat sleep surface such as a crib or bassinet.
• Never let the child sleep in this product.
• DO NOT move or lift this product with the baby inside it. Never lift a product using a toy bar as a handle.
• ALWAYS place the product on the floor. Never use this product on an elevated surface (e.g. a table).
• NEVER attach any additional strings or straps to the product or toy bar.

SUFFOCATION HAZARD:

• Babies have suffocated when seats are tipped over on soft surfaces.
• NEVER use on a bed, sofa, cushion, or other soft surface.

Prevent Serious Injury or Death

• NEVER leave the child unattended.
• To avoid injury ensure that children are kept away when unfolding and folding this product.
• Do not let children play with this product.

Caution

• This product contains small parts. Adult assembly is required.

IMPORTANT

• This product contains magnets.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine the product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.

Battery Information

• The swing control module requires (4) size D/LR20 (1.5V) alkaline batteries (not included).

CAUTION: Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture. To prevent battery leaks, which can burn skin and eyes:

• Always keep batteries away from children.
• Never mix old and new batteries or batteries of different brands or types.
• Always replace the entire set of batteries at one time.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Dispose of used batteries immediately.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged time.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
• Do not dispose of products or batteries in a fire, batteries may explode or leak.
• This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.

Care and Cleaning

• Seat pad and headrest – Remove from frame. Fasten the buckles on the seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
• Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame – Wipe the metal frame with a soft, clean cloth and mild soap.
• Storage – When putting the swing away for storage, always store it in a dry location, away from any heat sources, and out of the sun.

Parts List

Not Included

Installation

Using Instructions

Using the Seat Restraint

Using the Swing Control Module

Using Swing Function

Storage and Travel

FCC

FCC Statement / CAN ICES-3 (B) / NMB-3(B)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Find us on Facebook and Instagram @ingenuitybaby
• Retrouvez-nous sur Facebook et Instagram @ingenuitybaby
• ingenuitybaby.com.

References

• Kids2 Contact Us – Kids2, LLC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>