iTOMA CKS912 Kids Owl Alarm Clock Addo Instruction Manual

: June 1, 2024
: iTOMA

CKS912
ADDO

CKS912 Kids Owl Alarm Clock Addo

Children’s Alarm Clock with Sleep Trainer, Nighttime LED and Sleep Sound Machine
Visit our website at www.toma.com

WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED AND THERE IS NO BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOOK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
**** The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions. Keep these instructions. Follow all instructions Heed all warnings.
Do not block any ventilation openings.
Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including audio amplifiers) that produce heat.
If the provided AC mains adapter does not fit your outlet or is damaged, seek the advice of a qualified electrician before using a replacement mains adapter.
Protect the power cord from being walked on, knotted, snagged or pinched
Only use attachments | accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have falleninto the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped
Do not use the apparatus or its AC mains adapter in environments where there is arisk of water dripping o splashing. Do not place objects filled with liquids, such as vases or drinks, near the apparatus or AC mains adapter.
**** The AC mains adapter should remain readily accessible so thal AC power can be disconnected an emergency. The AC mains adapter must be removed completely from the AC power outlet to disconnect the power supply.
The lithium battery must not be exposed to excessive heat (such as sunshine) and must be correctly installed. Refer to the Changing the Lithium Battery section for more information.

PREPARATION FOR USE

Unpacking and Set Up

Remove the alarm clock from the carton and packaging materials.
Retain the carton and packaging for future reference and in case the alarm clock radio ever needs to be serviced or transported.
Remove any descriptive labels or stickers on the front or top of the cabinet.
Do not remove any labels or stickers from the back or bottom of the cabinet,
Note the serial number on the bottom of your radio and write this number in the space provided on the Warranty page of this manual
Place your alarm clock on a level surface such as a table, desk or shell convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity or vibration
Select and attach the appropriate plug attachment to the AC mains adapter. Unwind and fully extend the power cable.
Connect the mains adapter to the mains supply and the radio. Ensure the mains socket is switched on

Protect Your Furniture
This model is equipped with non-skid rubber feet to prevent the product from moving when you operate the controls. These ‘feet are made from non- migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of ail-based furniture polishes wood preservatives, and cleaning sprays may cause the rubber “feet” to soften and leave marks on the furniture. To avoid the risk of such damage to your furniture we recommend either a piece of cloth or self-adhesive felt pads attached to the underside of the alarm clock.
Power Source
The alarm clock uses an AC power adapter of a kind that depends on where the alarm clock is purchased. The AC power adapter for North America is rated 120V at 60Hz and within Europe or Australia is rated 220-240V at 50Hz. Using an incorrect AC power adapter is not covered by your warranty because it may damage the alarm clock. A lithium battery is used to maintain the time and alarm settings when the alarm clock loses AC mains power. To maximize the life of the lithium battery and to keep the radio and
alarm functions active you must ensure the AC power adapter remains connected and that the AC mains outlet is never turned off. Ideally you should use an un-switched mains outlet.

IMPORTANT NOTES

Avoid installing this alarm clock in direct sunlight, close to sources of heat, where thereis poor ventilation and places that are dusty, humid, wetor subject to vibration.
Operate controls and switches as described in the manual
Before turning on the power, make certain that the AC adapter is properly installed
When moving the unit, be sure to first disconnect the AC adapter. Do not use the AC power adapter if any part of it shows signs of damage.

MEET ADDO THE OWL

Thank You for Purchasing This iTOMA Alarm Clock

WHAT IS IN THE BOX

OVERVIEW

1.LED1 Button
2.SNOOZE/DIMMER/ ****Button
3LED2 Button
4 SET+Button
5.SET-Butlon
6 SLEEP/AWAKE Butlon
7.ALARM Button
8 .TIME Button
9.NAP Button| 10.VOLUME+ Button
11.VOLUME- Button
12 PLAY/STOP Button
13 SKIP/IREPEAT Button
14.BT Button
15.LOCK ON/OFF Button
16.RUBBER FEET
17 AC Adapter
18.SPEAKER GRILL
---|---

1.Play Musicindicator
2.Repeat Music indicator
3.Playback Music indicator
4.Alarm indicator
5 .Nap indicator
6. Sleep/Awake indicator| 7. Lock the ON Button to Prevent
Unintended Operations indicator
8. PM Indicator
9. Low Battery Indicator
10.8T Indicator
---|---

READY-TO-RISE SLEEP TRAINER

If your child is still young and cannot tell the time yet, Addo s a great clock toregulate your child’s sleep pattern. Addo uses different colored lights and emoticons to teach your child when itis time for bed and time to wake up.
lllustration 1and 2: NAP Emoticon
After setting the Nap time, the emoticon of Addo (as shown in lllustration
2)will have its eyes fully closed.
When itis time for bed, The light around Addo’’s face will turn YELLOW, and the emoticon of Addo will have its eyes fully closed or slightly close and rest ts eyes (as shown in lllustration 1 or 2), the music will begin, and the nap indicator will flash to remind your child to get ready for bed. Illustration 3 and 4: AWAKE ‘Time Emoticon
Addo will also teach your child stay in bed until it reaches the preset awake time. 30 minutes before the awake time, Addo will enter the play time. The light around Addo’s face will glow YELLOW, and Addo will have its eyes slightly closed (as shown in lilustration 3) to teach your child to play patiently in his/her room.
When itis time to wake up, Addo will greet your child with smiley, wide open eyes (as shown in lllustration 4) and the light around Addo’s face will glow BLUE! The Awake indicator will flash and the music begins play.

SLEEP TRAINING LED

If your child is afraid of the dark, you can turn on the sleep training LED to accompany him/her to sleep at night.
Press the “LED2″ button to change the color of the light around Addo’s face. Pressing the button multiple times will give you multiple choices of colored lights including:

gradient colors
6 single colors
marquee;
top half blue and bottom half green

Press the “DIMMER” button to adjust the desired level of light brightness(available in 4 levels)

LISTENING TO BLUETOOTH SPEAKER

Press the BT button to turn the Bluetooth ON(BT indicator flashes for pairing.)
Enable your bluetooth device and select CKS912 from its available/paired device list.If pairing successful the unit will prompt and BT indicator will become solid.
Automatic connection with your bluetooth devices is possible if they have been paired successfully with this unit before.
After paired, you can play your music through this bluetooth speaker.
Press the DIMMER/ button can pause or resume playback streaming over your bluetooth device.
Note:If pairing unsuccessful, all previously paired bluetooth devices around should be disconnected first by pressing and holding the BT button untill it prompts,or turn off their bluetooth connection – in order to avoid making any auto reconnection between them.Then, set this unit to bluetooth mode, and tap the bluetooth switch on your phone/devices off and back on again to refreshisearch any nearby CKS912 for paring.

SETTING THE CLOCK MANUALL

Checking the Current Date and Time
Press the “TIME” button repeatedly to see the current date and time ina cycle. To return to the clock display mode, leave it idle for 3 seconds.
Setting the Time

Press the “TIME ” button until the “HOUR” digits flash
Press the *SET-” button or the “SET+” button to adjust the hour. (when the PM indicator is on which means it is in PM setting; whenitis off, itis in AM setting.)
Press the “TIME ” button again, and the “MINUTE” digits will flash.
Press the “SET-” button or the *SET+” button to adjust the minute.
Setting the Year
Press the “TIME SET” button again the “YEAR” digits flash
Press the “SET-” button or the ‘SET+ button to adjust the year
Setting the Month and Day
Press the “TIME” button again until the ‘MONTH” digits flash
Press the “SET-” button or the “SET+” button to adjust the month
Press the “TIME” button again until the “DAY” digits flash
Press the “SET-” button o the “SET+” button to adjust the day. For instance, April 16th will appear as “4.16”
Setting the Time Format
Press the “TIME” button again, until the “24H” or “12H digits flash;
Press the “SET- button or the “SET+ button to adjust the time format
Press the “TIME” button again, or leave it idle for 40 seconds to store all the new settings and return to the clock display mode

Note: The operations for step 1 through step 13 are to be performed in one continuous setting, if you need to perform a specific operation, press and hold the “TIME” button for 3 seconds, then press the “TIME” button repeatedly until your desired operation appears on the display and press the “SET-” button or the “SET+” button to adjust to your desired setting

SETTING THE ALARM

Turning on/off the Alarm Press the “ALARM” button to enter the alarm mode, and the “ ” alarm indicator will appear on the display. To exit the alarm mode, press the ALARM” button again and the ’ alarm indicator will disappear on the display.
Setting the Alarm Time
To check the preset alarm time for the days of the week press the *ALARM” button repeatedly.

Press and hold the “ALARM” button and the #3+” alarm indicator and the “HOUR” digits will flash.
Press the “SET-” button or the *SET+” button to adjust the hour.
Press the “ALARM” button again and the ¥30″ alarm indicator and the “MINUTE” digits will flash
Press the “SET-” button or the SET+” button to adjust the minute
Setting the Alarm for the Days of the Week Needed
You can set the alarm days in the following 3 options.
Option 1: The digits 1 – 7 indicate Monday through Sunday
Option 2: The digits “1 – 5” indicate Monday through Friday
Option 3: The digits “6 — 7 indicate Saturday through Sunday
Press the “ALARM” button again and the “ALARM DAYS” digits wil flash. then press the *SET-” button or the “SET+” button to adjust to your desired alarm days
Everyday – the alarm will sound every day of the week. Weekdays only – the alarm will sound only on Monday through Friday. Weekends only – the alarm will sound only on Saturday and Sunday. Setting the Alarm Sound
Press the “ALARM” button again until the “VOLUME LEVEL” digits (from 001 10 015) lash on the display,
Press the “SET-” button or the “SET+” button to select the desired alarm sound from the following selections: 6 selections of white noise; b 5 selections of lullabies: c: buzzer.
Prossthe – bution to adjust to your desired volume level.

Snooze

Doze for 9 more minutes
When the alarm goes off, press the “SNOOZE” button to doze for 9 more minutes. When the 9 minutes is up, the alarm will sound again. To turn off the alarm completely, press the *ALARM” button.
Note: After the snooze time is over and if no further operation is performed, the alarm will sound for 60 minutes then turn off automatically. The alarm will sound again until itis required again.

SETTING THE SLEEP TRAINER

Press and hold the “SLEEP/AWAKE” button to set the sleep or awake time. The text “SLEEP” and the “HOUR” digits will flash on the display.
Press the “SET-” button or the *SET+” button to adjust the hour.
Press the “SLEEP/AWAKE” button again and the “MINUTE” digits will flash on the display.
Press the “SET-” button or the “SET+” button to adjust the minute.
FPress the “SLEEP/AWAKE button again, the text AWAKE” and the HOUR’ digits will flash on the display. Then, press the “SET-” button or the “SET+* button to adjust the hour.
Press the “SLEEP/AWAKE button again, the “MINUTE” digits will flash on the display. Then, press the “SET-” button or the *SET+” button to adjust the minute.
Pross the “SLEEP/AWAKE” button again, the volume level digits (from 001 to 015) flash on the display;
Press the “SET-” button or the “SET+” button to select your desire sound option including
a: 6 selections of white noise;
b:5 selections of lullabies;
C: cibuzzer; then press* “ and” “button to adjust the volume level;
Press the “SLEEPIAWAKE” button to exit the sleep/awake time set mode.

Turn on/off SLEEPJAWAKE
Activating and Deactivating the Sleep Training Alarm Clock
Don’t forget to turn on Addo’s sleep trainer function after you’ve setit. To turn the sleep trainer on or off, press the SLEEP/AWAKE” bution repeatedly until the texts “SLEEP” and “AWAKE” appear/disappear on the display. Half an hour prior to sleep time During sleep time: eyes closed; yellow light and music off
Half an hour before sleep time, Addo’s eyes are slightly closed, the yellow light around the face is on, and the music is turned on. The SLEEP” indicator flashes until it reaches the desired sleep time.
Once it reaches the desired sleep time, Addo’s eyes will be closed, the yellow light will be off, the music will stop, and the “SLEEP” indicator will $top flashing. Half an hour prior to awake time Awake time: eyes wide open; blue light and music on

Turn off the Light
To turn off the SLEEP or AWAKE, press the “SLEEP/AWAKE button or the *SNOOZE” button
If the blue light is not turned off manually, it will automatically shut off an hour after the wakeup time.

SETTING THE NAP TIMER

Press and Hold the “NAP” button, the “NAP TIMER” digits (30/60/90/0FF) and the emoticon of Addo will change to eyes being fully closed
Press the NAP” bution repeatedly to select the desired duration in minutes (30 /60/90/OFF), or press the *SET-” button or the “SET+” button to adjust the duration(1-30min).

When the nap time is over, the alarm sound will play and the yellow light around Addo’s face will glow, the eyes will blink constantly and the NAP indicator lashing on the display. Press the “SNOOZE” button to turn off the nap timer.
Note: To turn the nap timer on/off, press the “NAP” button until the text “NAP” appears/disappears on the display.
Note: To adjust to your desired alarm sound and volume level for the nap timer, piease refer to the “Setting the Alarm Sound” section on Page 10.

DISPLAY BRIGHTNESS AND NIGHTTIME LED

Press the “DIMMER” button to adjust to the desired level of display brightness.It cannot be adjusted when bluetooth is on.
Brightness comes with 4 different facial expressions and is available in 4 levels as illustrated in the next page.Press the “LED1″ button to turn on/off the nighttime LED and both of Addo’s ears will glow amber.

PLAYING MUSIC

Press the “ ” button to play music and the indicator will appear on the display.
Press the * ” button again to stop music and the indicator will disappear on the display.
Press the “SET+/SET-” button to select your desired music or sleep sound
Press the * ” button to loop your desired music or sleep sound, and the indicator will appear on the display.
Press the * ” button again to play all the music o sleep sound inaloop, and the “ ” indicator will appear on the display.

LOCK ON/OFF MODE

Push the “LOCK” toggle button to lock the clock setlings to prevent any unwanted changes. The * ” indicator will appear on the display. However, when the alarm goes off, the dimmer (display brightness) and snooze functions can still be performed to turn off the alarm in the lock on mode.

CHANGING THE LITHIUM BATTERY

The lithium backup battery needs replacement when the “LOW BATTERY indicator light amber, otherwise, the time and alarm settings will be lost Iresetafter a power outage.

Leave the AC adapter connected to your AC outlet to retain memory while the original battery is removed.
Unscrew the battery holder from the cabinet with a small screwdriver and insert a new battery with the same CR2032 or equivalent type into the holder the same way, observing the positive (+) polarity before sliding the holder back into the slot. The LOW BATTERY indicator should then be Off.

WARNING
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
DO NOT INGEST BATTERY.CHEMICAL BURN HAZARD
This product contains a coin/button cell battery.If the coin/button cell battery is swallowed,it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.If the battery compartment does not close securely,stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body,seek immediate medical attention.

CARE AND MAINTENANC

Care of Cabinets
If the cabinet becomes dusty, wipe it with a soft cloth. it the cabinet becomes smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water or any liquid to get inside the cabinet. Never use any abrasive cleaners or cleaning pads as these will damage the finish of your radio.
Lithium Battery Precautions
Dispose of the old battery properly. Do not leave it lying around where a young child or pet could play with or swallow it. It the battery is swallowed, contact a physician immediately.
The battery may explode if mistreated. Do not attempt to recharge it or disassemble it. Do not dispose of the old battery in a fire. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus. This marking indicates that this product should not be disposed of with other household wastes throughout the country.
**** To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle this unit responsibly so as to promote the re-use of material resources. To return your used device, please use return and collection systems or contact the retailer where the product was purchased as they know how to safely recycle this product.

FCC WARNING

FCC PART 15.19 WARNING STATEMENT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING I WO CONDITIONS.

THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. AND
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

FCC PART 15.21 WARNING STATEMENT
NOTE: THE GRANTEE IS NOT RESPONSIBLE FORANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE.SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
FCC Part 15.105 Warning Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures;
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Warning Statement:
‘The device has been evaluated to meet general RF exposure requirement.To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of20cm between the radiator and your body.

iTOMA
1-Year Limited Warranty
ITOMA (Hong Kong) Company Linited (TOMA) warrants to the original consumer o this ITONIA product tha it will furish a replacement for, or, at its 1sole discretion , repair any part which proves (upon inspection by TOMA) to be. defective under omal use within 1 year of the origina purchase date-This warranty does not apply to cosmetic appearance and consumable items, including, but not limited o, antennias, knobs, cabinats, or cases, and in the case of batteries, for damage caused by leaking batieries. It aiso.
does not apply to the product, or to any part thereof, that damaged through misuse or negligence.
Furthermore, this warranty willbecome invlid i, in the judgment of TOMA he product or any part thereof has been a more readable installed incorrectly, or has been repaired or altered other than by ITOMA
This warranty gives you specific legal rights and you may also have other ights which vary from state {0 state. Some states do not allow the exclusion o imitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limiation may 1not apply fo you.
For Service, Warranty, or Product Information,
Please contact TOMA (Hong Kong) Company Limited, www.itoma.com /contact us by email at [email protected]
PLEASE SAVE THIS CARD TOGETHER WITH ORIGINAL DATED PROOF OF PURCHASE FOR YOUR RECORDS AND FOR CUSTOMER SERVICE.