voda VECL025 Eclipse Wall Mounted Basin Mixer Instructions
- June 3, 2024
- voda
Table of Contents
Eclipse Wall Mounted Basin Mixer Chrome
VECL025
Congratulations on your purchase of this high-quality product from Voda
Plumbingware.
Please read the following before installation and retain it (along with your
receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
Minimum Pressure = 35kPa
Maximum operating Pressure = 500kPa*
Maximum operating Temperature = 65 deg. Celsius For domestic use only.
CONFIGURATION
Mains Pressure systems Install as supplied.
Unequal Low systems| Insert the flat flow restrictor (with the black o-ring
facing out) into the cold “C” inlet, and change Aerator to Low-Pressure
Aerator.
---|---
Equal Low systems| Install body as supplied. Change Aerator to Low-Pressure
Aerator.
INSTALLATION
*FOR PRESSURES EXCEEDING 500kPa INSTALL A PRESSURE REDUCING VALVE. THOROUGHLY FLUSH ALL PIPES TO ELIMINATE ANY REMAINING DIRT AND RESIDUE, AND INSTALL INLINE FILTERS. FAILURE TO DO SO MAY VOID THE WARRANTY.
Before commencing installation turn off the water supply.
- Flush all water lines to remove any foreign materials (so it does not interfere with the flow-regulated aerator or damage the cartridge, and install inline filters if not already fitted.
- Make sure that the body recess including wall lining thickness does not exceed 41.5mm to the body center.
- Note the protrusions at the back of the body to ensure a perpendicular mounting, once screwed into place.
- Install, making sure the spout is on the left. The spout fitment is the final anchor point for the body set.
- Turn on the mains supply.
- Check for leaks.
Plumbers Note: Do not pressure test this mixer under static pressure.
WARRANTY
PLEASE CALL US BEFORE REMOVING TAPWARE OR UNDERTAKING ANY REPAIR WORK.
Please refer to our website for warranty information:
www.vodaplumbingware.co.nz/warranty
In the unlikely event that this product fails during its warranty period,
phone our Customer Service team immediately on 0508 367 366 – as unauthorized
removal of the product may void the warranty.
CARE AND MAINTENANCE
SHOULD NOT BE CLEANED WITH ACIDIC, CAUSTIC/ALKALINE, ABRASIVE, OR CITRIC
CLEANERS.
A soft, damp cloth is recommended for cleaning (Not a Microfiber cloth). Mild
soap solutions can also be used on occasion.
Voda Plumbingware Limited
| Freephone: 0508 367 366
| 5 Hewlett Street, Port Whangarei 0110
| vodaplumbingware.co.nz