voda VECL20BG Clipse Basin Mixer User Manual
- June 4, 2024
- voda
Table of Contents
voda VECL20BG Clipse Basin Mixer
Congratulations on your purchase of this high quality product from Voda Plumbingware. Please read the following before installation and retain (along with your receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
- Minimum Pressure = 35kPa
- Maximum operating Pressure = 500kPa* (As per NZ Building Code AS/NZ 3500.1)
- Maximum operating Temperature = 65 deg. Celsius
For domestic use only.
CONFIGURATION
- Mains Pressure systems Remove the flow restrictor from the nut of the cold hose and change aerator to the Mains Pressure one (supplied).
- Unequal Low systems Install as supplied.
- Equal Low systems Prior to installation, remove the flow restrictor from the nut of the cold hose
INSTALLATION
FOR PRESSURES EXCEEDING 500kPa INSTALL A PRESSURE REDUCING VALVE. THOROUGHLY FLUSH ALL PIPES TO ELIMINATE ANY REMAINING DIRT AND RESIDUE, AND INSTALL INLINE FILTERS. FAILURE TO DO SO MAY VOID THE WARRANTY.
- Before commencing installation turn off the water supply.
- Position tap in 35mm hole, making sure the seal between tap and supporting surface is in place.
- Anchor to bench with fittings pack.
- Thoroughly flush all pipes to eliminate any remaining dirt and residue and install inline filters.
- Connect supply hoses to plumbing connections. Minimum bend for flexible hose is 35mm radius.
- Do not stretch, crush or twist hoses. Do not swage hose ends.
- Turn on mains supply.
- Check for leaks.
Plumbers Note : Do not pressure test this mixer under static pressure
WARRANTY
PLEASE CALL US BEFORE REMOVING TAPWARE OR UNDERTAKING ANY REPAIR WORK.
Please refer to our website for warranty information:
www.vodaplumbingware.co.nz/warranty
In the unlikely event that this product fails during its warranty period,
phone our Customer Service team immediately on 0508 367 366 – as unauthorised
removal of the product may void the warranty.
CARE AND MAINTENANCE
SHOULD NOT BE CLEANED WITH ACIDIC, CAUSTIC/ALKALINE, ABRASIVE OR CITRIC
CLEANERS.
A soft, damp cloth is recommended for cleaning (Not a Micro fibre cloth). Mild
soap solutions can also be used on occasion.
PROUD PARTNER AND SUPPORTER OF MASTER PLUMBERS, GASFITTERS AND DRAINLAYERS
Voda Plumbingware Limited
Freephone: 0508 367 366
5 Hewlett Street, Port Whangarei 0110
vodaplumbingware.co.nz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>