voda VSS022 Stainless High Rise Basin Mixer Instruction Manual
- June 4, 2024
- voda
Table of Contents
STAINLESS
High Rise Basin Mixer
VSS022
Instruction Manual
Congratulations on your purchase of this high-quality product from Voda
Plumbingware.
Please read the following before installation and retain it (along with your
receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
Minimum Pressure = 35kPa
Maximum operating Pressure = 500kPa*
Maximum operating Temperature = 65 deg. Celsius
For domestic use only.
CONFIGURATION
Mains Pressure systems Remove the flow restrictor from the nut of the cold
hose and change the aerator to the Mains Pressure one (supplied).
Unequal Low systems Install as supplied.
Equal Low systems Prior to installation, remove the flow restrictor from the
nut of the cold hose.
INSTALLATION
*FOR PRESSURES EXCEEDING 500kPa INSTALL A PRESSURE REDUCING VALVE. THOROUGHLY FLUSH ALL PIPES TO ELIMINATE ANY REMAINING DIRT AND RESIDUE, AND INSTALL INLINE FILTERS. FAILURE TO DO SO MAY VOID THE WARRANTY.
-
Before commencing installation turn off the water supply.
-
Position the tap in a 35mm hole, making sure the seal between the tap and supporting surface is in place.
-
Anchor to bench with a fittings pack.
-
Thoroughly flush all pipes to eliminate any remaining dirt and residue and install inline filters.
-
Connect supply hoses to plumbing connections. The minimum bend for a flexible hose is a 35mm radius.
Do not stretch, crush or twist hoses. Do not swage hose ends. -
Turn on the mains supply.
-
Check for leaks.
-
PLUMBERS NOTE: DO NOT PRESSURE TEST THIS MIXER UNDER STATIC PRESSURE.
ATTACH PROOF OF PURCHASE HERE
WARRANTY
PLEASE CALL US BEFORE REMOVING TAPWARE OR UNDERTAKING ANY REPAIR WORK.
Please refer to our website for warranty information:
www.vodaplumbingware.co.nz/warranty
In the unlikely event that this product fails during its warranty period,
phone our Customer Service team immediately on 0508 367 366 – as unauthorized
removal of the product may void the warranty.
CARE AND MAINTENANCE
NOT TO BE CLEANED WITH ASTRINGENT, ABRASIVE, OR CITRIC CLEANERS.
A soft, damp cloth is recommended for cleaning. Mild soap solutions can also
be used on occasion.
Try to avoid excessive scrubbing as this could cause damage and void your
warranty.
PROUD PARTNER AND SUPPORTER OF MASTER PLUMBERS, GASFITTERS AND DRAINLAYERS
Voda Plumbingware Limited
Freephone: 0508 367 366
5 Hewlett Street, Port Whangarei 0110
vodaplumbingware.co.nz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>