DONGGUAN SAYIN ELECTRONIC HARDWARE CO LTD 1195BT Emergency FM Radio with Bluetooth and USB Playback Instruction Manual

DONGGUAN SAYIN ELECTRONIC HARDWARE CO LTD 1195BT Emergency FM Radio with

Bluetooth and USB Playback

Product Specifications

• Model: 1195BT
• Features: Emergency FM Radio with Bluetooth and USB playback
• Battery Type: Built-in LI-ION rechargeable battery
• Charging Time: Approx. 3-6 hours
• Input: USB type-C socket, Hand crank power generator
• Supported File Formats: All conventional file formats supported by mobile devices
• Compliance: FCC Part 15

Product Usage Instructions

Charging the Battery:

1. Connect the supplied USB cable to the USB type-C socket of the radio and a 5V USB adaptor.
2. Alternatively, in an emergency, charge the battery using the hand crank power generator by rotating it quickly.
3. The input LED indicator will show the charging status.

Setting the Time:

Follow the instructions in the manual to set the time on the device.

Using the Radio:

1. Press and hold the Power key to turn on the radio.
2. Select the mode (radio, MP3, AUX) using the Mode key.
3. Adjust the volume using the Volume keys.
4. To turn off the radio, press and hold the Power/Mode key.

Using MP3 Player:

1. Insert a TF card or USB memory bar to play MP3 files.
2. Control playback using the Previous track, Next track, and Play/Pause buttons.
3. Fast forward or rewind a song by holding the Previous track or Next track buttons.

Bluetooth Connection:

1. Enable Bluetooth on your mobile device and scan for available devices.
2. Select ‘1195BT’ on your device and pair it with the radio for music playback.

Playing Music:

The radio supports playing music in all conventional file formats. Connect your mobile phone charging cable to the USB OUT 5V socket for charging.

Frequently Asked Questions (FAQ):

• Q: How long does it take to fully charge the built-in battery?
  A: It takes approximately 3-6 hours to fully charge the battery using a USB adaptor or hand crank power generator.

• Q: What file formats are supported for music playback?
  A: The radio can play music in all conventional file formats supported by your mobile device.

Operation

1. LED TORCH
2. USB DRIVES FOR MP3 PLAYER
3. USB 5V DC OUT PORT PROVIDES EMERGENCY CHARGING FOR MOBILE DEVICES
4. USB C 5V DC IN
5. MICRO SD SLOT FOR MP3 PLAYER
6. 3.5 MM AUX IN AUDIO INPUT JACK
7. TELESCOOPIC ANTENNA
8. CHARGING INDICATOR
9. POWER INDICATOR
10. DIGITAL LCD DISPLAY WITH BACKGROUND LIGHT
11. HANDLE
12. TORCH OFF SOS SWITCH
13. VOLUME CONTROL
14. DYNAMO HAND CRANK
15. LI ION DRY BATTERY SWITCH
16. TUNING
17. POWER / MODE
18. NEXT TRACK
19. PLAY / PAUSE T IME SET
20. PREVIOUS TRACK
21. SPEAKER
22. BASS VIBRATION
23. BATTERY COMARTMENT FOR BACKUP

CHARGE BUILT IN RECHARGEABLE BATTERY

You have two ways to charge the built in LI ION battery.

1. Charge through 4/ USB socket
   Connect a supplied USB cable to ( 4/ DC IN 5V) USB type C socket of the portable radio and 5V USB adaptor (not supplied).
   Note:
   The INPUT LED indicator (RED) will flash
   It takes approx. 3 6 hours to fully charge the battery. T he input LED indicator(RED) will keep light

2. Charge through power generator 14/ hand crank)
   In an emergency, you can charge the built-in battery through the power generator.
   Pull out the POWER GENERATOR, then rotate it quickly.
   The generated power is stored in the built-in battery.

Note:
The INPUT LED indicator (RED) will light.
Rotate the hand crank for 5 minutes to activate the built-in battery for initial use.

SETTING THE TIME:

• Keep pressing 17/ POWER key until LCD screen displays a random date when the radio is in standby mode before the first use of the radio,short press 19/ TIME SET key to enter the setting mode of year,month and day ,the year value displayed on the LCD screen and start to flash, tunes the tu ning to adjust it ,the same oper ation is to set month and day, time,after setting the month and day of the current year the system automatically recognized the day of the week.
• Press and hold the 19/ TIME SET again to save the current local time value exit,and return to the standby mode.
• If the setup process is interrupted while the value for year, month, day, time is flashing, the value on the screen will flash 5 times, and it will be saved before exit.

Using the Radio

• The power mode can be selected by 15 Li-ion Dry battery
• Press and hold the 17/ Power key to turn on the unit.
• Adjust the volume to control the sound volume, pull out the FM antenna, make sure the good reception,
• Briefly press 17/ POWER/MODE to choose the FM model.
• Tunes the tuning key to adjust scan up or down the FM frequency until get FM station,
• Press and hold the 17/ Power /Mode key to turn off the unit.

Using the MP3

• Press and hold the 17/ Power key to turn on the unit.
• Insert the TF card into the 5/ micro SD slot; or insert the USB memory bar into the 2/ USB port; or connect the device by line in cable into the 6/ AUX IN jack, short press 17 Power/Mode to choose the current mode, and press 19 key to play Mp3 song.
• Use the 20 Previous track 18 Next track 19 Play/Pause ””, 13 Volume key to control the MP3 playing, press and hold 20 Previous track or 18 Next track to fast forward and fast rewind the song.
  Press and hold the 17 Power/Mode key to turn off the unit.

Using the Bluetooth

Switch on the Bluetooth® function on your mobile device.

• Press and hold the 17/ Power key to turn on the unit.
• Briefly press the 17 Power/Mode button to select the BT mode.
• The display shows a Disconnected flash while the device is searching for a Bluetooth® signal. You will hear a Bluetooth connection tone
• Start the device scan on your mobile device.
• Select “ 1195BT ” on your mobile device and connect the devices as usual

PLAYING MUSIC
The radio can play music in all conventional file formats supported by your mobile device.

• First start playback on your mobile device.
  You can also perform these functions directly on the radio:

• Press “ 19 Play/Pause ” to start and pause

• To return to the start of the track or to skip to the previous track” 20 Previous track ”, press once or

• Skip to the next track with “ 18 Next track

• Press the VOL +/ button to adjust the volume.

Note:
If the volume is too low, adjust it on your mobile device.

DISCONNECTING THE DEVICE
There can only be one device connected to the radio via Bluetooth® at any time. If you would like to connect to another device, you must first disconnect the current device. Proceed as follows:

• Unpair the devices on your mobile device.
• The devices will also unpair if you move them outside the Bluetooth® range.
  Note:
  If you switch off the radio, it will automatically connect with the Bluetooth® « device again once it is switched back on, provided it is close by and switched on and the BT function is activated.

LED TORCH

Please switch “ 12 TORCH OFF SOS to the TORCH position, then turn on the LED torch

SOS
Please switch “ 12 TORCH OFF SOS to the SOS position, then turn on the SOS siren
The very loud alarm sounds on and the flashlight keeps flashing.

USB OUT 5V

• This portable radio can also serve as an emergency charger for your mobile phone. Do not use it as a normal power bank.
  Note : Emergency Charger is only available in LI-ION mode

• Plug your mobile phone charging cable (not supplied) into 3/ USB OUT 5V socket, then plug it into your phone

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if no not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>