BM innovations GmbH BM-HRM2 Performance Monitor User Guide
- June 10, 2024
- BM innovations GmbH
Table of Contents
BM Innovations GmbH BM-HRM2 Performance Monitor
Product Information: BM-HRM2 Performance Monitor
The BM-HRM2 Performance Monitor is a device intended for recreational use only and is not intended for medical purposes. It transmits heart rate and motion- related data to different devices that can help in achieving fitness and training goals. It is water-resistant up to 30 m/100 ft and has a CR 2032 coin cell battery that provides one year of operation when used for an hour per day, seven days a week. The device comes with an electrode strap that needs to be worn against bare skin and moistened before exercising. The electrodes should be pressed firmly against the skin, and the logo must be upright and located in the center of the sternum.
Key Features:
- Transmits heart rate and motion-related data
- Water-resistant up to 30 m / 100 ft
- Contains a CR 2032 coin cell battery
- Recommended to wear the Electrode Strap against bare skin
Usage Instructions:
- Wear the Electrode Strap against bare skin.
- Moisten the electrodes before exercising.
- The electrodes should press firmly against your skin, and the logo should be upright and located in the center of your sternum.
- Put on the Performance Monitor to start operating automatically.
- If you ever experience any skin irritation or any other abnormality while wearing the Performance Monitor, remove it immediately.
- To clean the PM, wipe it with a soft, dry cloth, or with a cloth that has been moistened in a weak solution of water and a mild neutral detergent. Do not use thinner, benzene, alcohol, or any other volatile agent to clean the PM.
- Replace the battery cover and the O ring together with the battery to ensure the PM remains water-resistant. Keep batteries out of the reach of small children. Should a battery ever be swallowed accidentally, contact a physician immediately.
By following these directions, you can maximize the life of your Performance Monitor. If you ever require servicing, send it to your nearest authorized service center. Only perform the procedures described in this user guide, and never attempt to disassemble or repair your PM. Protect the PM from sharp objects, extreme heat, or prolonged exposure to direct sunlight. Store your PM in a clean, dry environment at room temperature. When putting on or taking off the performance monitor, do not twist, bend, or stretch it excessively.
Disclaimers
User’s responsibility
This Performance Monitor is intended for recreational use only. IT IS NOT INTENDED FOR MEDICAL PURPOSES.
Warnings
Exercise may include some risk. Before starting any exercise program, you
should consult with a physician. It is recommended that you warm up and
stretch before beginning your workout. Stop exercising immediately if you
experience pain or feel faint, dizzy or short of breath. Please note that
exercise intensity, medications, blood pressure, asthma, caffeine, alcohol,
nicotine and other factors can affect your heart rate. Notice to persons with
pacemakers, defibrillators or other implanted electronic devices. Before
beginning use of this electronic sport equipment, it is recommended that you
have an exercise test under your doctor’s supervision to ensure the safety and
reliability of the simultaneous use of your implanted device and this
equipment. Use of this product is at your own risk. Keep the Performance
Monitor out of reach of young children.
FCC and IC Statements
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Key Features
- Heartbeat detection with typ. accuracy of ±1 bpm for heart rate and 1 ms for beat-to-beat
- Robust heartbeat detection even in high-motion environments due to sophisticated algorithm
- Soft silicone electrodes provide excellent skin contact and are very comfortable and functional
- Ergonomic and flat design, thickness of middle part only ~10mm
- High sensitivity acceleration data with 2g, 4g, 8g or 16g full scale and 14 bits resolution
- Acceleration data output data rates of 1.6Hz, 12.5Hz, 25Hz, 50Hz, 100Hz and 200Hz possible
- Accurate step and posture detection available
- Specific motion detection algorithms are possible for customized versions
- 256 kB built-in memory for data recording – e.g. storing heartbeat intervals for up to 3 days
- A lifetime of a standard CR2032 battery is more than 1 year when used 1 hour per day
Quick Start
The Performance Monitor transmits heart rate and motion-related data that can be received, displayed and recorded by different devices to help you achieve your fitness and training goals, so it is important to wear it correctly.
- For best results, we recommend you wear the Electrode Strap against bare skin.
- Be sure to moisten the electrodes before exercising.
- The electrodes should press firmly against your skin and the logo should be upright and located in the center of your sternum.
- the Performance Monitor starts operation automatically when you put it on.
Caution
Should you ever experience any skin irritation or any other abnormality while
wearing the Performance Monitor, remove it immediately.
Care and Maintenance
Your Performance Monitor (PM) helps you achieve your fitness and training goals. By following the directions below, you can maximize the life of your PM. If your PM does require servicing, you should send it to your nearest authorized service center.
- Only perform the procedures described in this user guide.
- Never attempt to disassemble or repair your PM.
- Protect the PM from sharp objects, extreme heat or prolonged exposure to direct sunlight.
- Store your PM in a clean, dry environment at room temperature.
- When putting on or taking off the performance monitor, please do not twist, bend or stretch it excessively.
- To clean the PM, wipe it with a soft, dry cloth, or with a cloth that has been moistened in a weak solution of water and a mild neutral detergent. Do not use thinner, benzene, alcohol or any other volatile agent to clean the PM.
Water Resistance
Your Performance Monitor is water resistant up to 30 m / 100 ft. Do not wear the PM while immersed in water.
Replacing the Battery
The PM contains a CR 2032 coin cell battery which should provide one year’s operation when using the PM one hour per day / 7 days per week. Replace the battery as illustrated here:
Replacing the battery cover and the O ring together with the battery is recommended to ensure the PM remains water-resistant. Replacement covers are available with replacement batteries. Keep batteries out of the reach of small children. Should a battery ever be swallowed accidentally, contact a physician immediately.
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operaton is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED compliance statement
This device contains license-exempt transmiter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.