bristan N116-F Standard Wall Outlet User Guide
- June 4, 2024
- BRISTAN
Table of Contents
Installation Instructions & User Guide
Please leave these instructions with the end user
Product Code: N116-F (D1)
User Guide
Specifications
Working Pressures| Tools You’ll Need| Inlet Connections
---|---|---
| | Female 1/2” BSP Inlet Connection
Prior to Installation
All products manufactured and supplied by Bristan are safe provided they are
installed, used correctly, and receive regular maintenance in accordance with
these instructions.
Isolation valves must be fitted to the inlet water supplies to ensure ease of
future maintenance.
This product must not be modified in any way as this will invalidate the
guarantee.
Full access must be made available for future maintenance/servicing purposes.
This product needs to be installed in accordance with, and meet the
requirements of the Water Supply (Water Fittings) Regulations 1999 and
Scottish Byelaws 2004.
Before starting any installation please consider the following: before
drilling into walls, check that there are no hidden electrical wires, cables,
or water supply pipes. This can be checked with the aid of an electronic
detector.
If power tools are used do not forget to:
– Wear eye protection
– Unplug equipment after use
Warning: It is essential that you thoroughly flush through the pipework in
order to remove any remaining swarf, solder, etc before using this product.
Failure to carry out this procedure could cause problems or damage.
If in doubt, contact a registered plumber or your Local Water Authority or the
Secretary of the Institute of Plumbing, address as follows;-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex,
RM12 6NB, Tel: 01708 472791
Pack Contents
Spare Parts
To replace any spare parts for your product why not scan the below QR Code and
search for your product?
Installation
|
---|---
1. Check the wall for concealed wires and pipework before any drilling
commences.
Place the seal onto the rear of the product, prior to fitting it to the wall.|
2. Fit outlet to the wall using the back nut and washer inside the wall
cavity or wall space
|
3. Secure outlet to the wall surface from within the cavity or wall space,
using the back nut and washer| 4. Connect the pipework in the wall
cavity/space using the appropriate adaptor (not supplied)
| 5. Screw the shower hose (not supplied) onto the outlet. Turn on the water
supply and check all joints and connections for any leaks
General Cleaning
Bristan products are made from premium materials, with hand polishing and
electroplated finishes.
Your taps, shower, and accessories should be regularly cleaned with warm
water, a mild neutral liquid soap, and polished with a soft cloth.
Any residues from soap, toothpaste, shampoos, and shower gels can cause
blemishes if not rinsed off straight after use.
Household bleaches and cleaners contain harsh chemicals and may damage the
surface finish.
Avoid using abrasive cloths, scouring pads, scrub sponges, steel wool, or
anything similar.
Some surfaces such as nickel and pewter may be affected by the dye found in
some cloths, so it is also important to avoid hanging cloths on spouts.
At Bristan, we want to make things as easy as possible for our customers.
That’s why we offer solid guarantees on all our products, effective from the
date of purchase, to give you peace of mind.
To start your free guarantee simply scan the QR code and register your
product.
Alternatively, visit
www.bristan.com/register to register your
product via a computer.
For full guarantee terms and conditions visit
www.bristan.com/guarantees.
http://www.bristan.com//register
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>