Sputnik 1DD4770B810A430A Globe Glass Shade Chandelier Instruction Manual
- June 1, 2024
- Sputnik
Table of Contents
Sputnik 1DD4770B810A430A Globe Glass Shade Chandelier
Important Safety Instructions
BEFORE INSTALLING FIXTURE, MAKE SURE THE POWER TO THE CIRCUIT 15 TURNED OFF AT THE MAIN FUSE BOX/ CIRCUIT BREAKERUTILITY BOX.
- These instructions are provided for your safety. They must be read carefully and completely before beginning the assembly and installation of this lighting fixture.
- We strongly recommend that a professional electrician install all direct wire fixtures.
- The lighting fixture is meant for indoor use. DRY LOCATION ONLY
- It must be connected only to 3-wire, single-phase electrical supply systems.
(provided with ground wire or equivalent protection system)
For your safety, it is strongly recommended that two people install the
lighting fixture.
Warning
- To reduce the risk of fire, electrical shock or personal injury, always turn off light fixture and allow it to cool prior to replacing light bulb.
- Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
- Keep flammable materials away from lit bulb.
Assembly Instructions
- Read these instructions carefully and keep for future reference. Refer to parts inventory for guidance, and ensure you have all pieces before starting.
- When assembling place all parts on a soft, clean, and flatsurface such as a carpet to prevent scratches.
- Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
TOOLS YOU MAY NEED
Note: It is required to be sure as follows before installation.
- The light bulbs shall be tested lit before bulbs are assembled and lamp shades are installed.
- The electric wire length needs to be determined in advance.
Parts List
Accessories List
Exploded Views
Installation Steps
Care and Maintenance
WARNING: Before you perform any cleaning or maintenance work, turn off the electricity at the main circuit breaker panel.
- Wipe the fixture with a damp, soft cloth.
- Do not use any abrasive cleaners or cleaners that contain alcohol.
- When replacing bulbs, use 60-watt MAX for E26/27 bulb and E12/14 bulb, 40-watt MAX for G9 bulb, and 20-watt MAX for G4 bulb.
Troubleshooting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>