ViTM VPH Wall Mount Phone Charger User Manual
- June 1, 2024
- ViTM
Table of Contents
ViTM VPH Wall Mount Phone Charger
Specifications
- Product Name: ViTM Wall Mount Phone Charger
- Part Number: VPH
- Electrical Ratings: 24V AC | 1.2A
- Charging Capacity:
- Wireless: Up to 10W
- USB-A – 5V / 2.4A / 12W
- USB-C – 5V, 9V, 12V, 20V / 3A / Max 60W
Product Usage Instructions
Installation
- Wall Mount Version:
- Attach screws (not provided) to the wall.
- Slide the wall plate onto the screws.
Connecting Power
- Plug the charger into the power supply.
- Plug the other cord into the power supply.
- Then plug it into the wall outlet.
FAQ
Q: What are the electrical ratings of the ViTM Wall Mount Phone Charger?
- A: The electrical ratings are 24V AC | 1.2A.
Q: What is the charging capacity of the ViTM Wall Mount Phone Charger?
A: The charging capacity is as follows:
- Wireless: Up to 10W
- USB-A – 5V / 2.4A / 12W
- USB-C – 5V, 9V, 12V, 20V / 3A / Max 60W
Q: What safety instructions should I follow when using the ViTM Wall Mount Phone Charger?
- A: Ensure that the device is used for interior use only. Follow all electrical ratings and keep a minimum distance of 15cm between the radiator and your body during operation.
PARTS NEEDED
IMPORTANT SAFETY INSTRUCTIONS
- Interior use only.
- Electrical ratings: 24V AC | 1.2A
- Charging Capacity Wireless: Up to 10W
- USB-A – 5V / 2.4A / 12W
- USB-C – 5V, 9V, 12V, 2OV / 3A / Max 60W
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with a minimum distance of 15cm between the radiator & your body.
FCC VOC
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions.
Wall Mount Version
- Attach screws (not provided) to the wall. Slide wall plate onto screws.
- Plug the charger into the power supply. Plug the other cord into the power supply and then plug it into the wall.
- 3030 Corporate Grove Dr.
- Hudsonville, MI 49426
- Phone: 616.396.1355
- itc-us.com
- For warranty information please visitwww.itc-us.com/warranty-return-policy
- DOC #: 710-00227
- Rev A
- 09/01/23
Documents / Resources
| ViTM
VPH Wall Mount Phone
Charger
[pdf] User Manual
VPH Wall Mount Phone Charger, VPH, Wall Mount Phone Charger, Mount Phone
Charger, Phone Charger
---|---