QAZQA 95019 Rural Square Concrete Wall Light Instruction Manual

QAZQA 95019 Rural Square Concrete Wall Light

Product Information

Specifications

• Model: Alban WL Concrete 95019
• Power Supply: 220-240V~ 50Hz
• IP Rating: IP20

Manufacturer Information

• FittinQ B.V.
• Smaragdweg 52, 5527 LB Hapert, The Netherlands
• www.qazqa.nl
• FittinQ LTD
• 55 Baker Street, London, W1U 7EU United Kingdom

Product Usage Instructions

Installation

1. Choose a suitable location for the Alban WL Concrete 95019.
2. Ensure that the power supply is compatible with the specified voltage and frequency (220-240V~ 50Hz).
3. Make sure the installation area has appropriate IP20 protection against solid objects larger than 12mm.
4. Mount the fixture securely using the provided mounting hardware or follow the manufacturer’s instructions.
5. Connect the power supply to the fixture following the electrical wiring diagram provided.

Operation

To operate the Alban WL Concrete 95019:

1. Ensure that the fixture is properly installed and connected to a suitable power source.
2. Turn on the power switch located on the fixture or use any provided remote control.
3. The light output can be adjusted using the dimming function if available.
4. Follow any additional instructions or features specific to the product as mentioned in the user manual.

Maintenance

To ensure the longevity and optimal performance of the Alban WL Concrete 95019, follow these maintenance guidelines:

1. Regularly clean the fixture using a soft, dry cloth to remove dust and debris.
2. Avoid using harsh chemicals or abrasive materials that may damage the surface.
3. Inspect the fixture for any signs of damage or loose connections regularly.
4. If any issues are detected, disconnect the power supply and contact the manufacturer or a qualified technician for assistance.

Disposal

• When disposing of the product, follow the local regulations and guidelines for electronic waste disposal.
• Do not dispose of the Alban WL Concrete 95019 with regular household waste.

Frequently Asked Questions (FAQ)

• Q: What is the power supply requirement for the Alban WL Concrete 95019?
• A: The Alban WL Concrete 95019 requires a power supply of 220-240V~ 50Hz.
• Q: What is the IP rating of the Alban WL Concrete 95019?
• A: The Alban WL Concrete 95019 has an IP rating of IP20, protecting solid objects larger than 12mm.
• Q: How should I clean the fixture?
• A: Use a soft, dry cloth to clean the Alban WL Concrete 95019. Avoid using harsh chemicals or abrasive materials that may damage the surface.
• Q: What should I do if I encounter any issues with the fixture?
• A: If you experience any issues with the Alban WL Concrete 95019, disconnect the power supply and contact the manufacturer or a qualified technician for assistance.

Features

Power

ON/OFF

Dimensions

Installation Instructions

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product.
Please keep this user manual for further reference.

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably through a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.
10. Meaning of symbols:

Symbols

• This icon indicates the level of water-proof and dust-proof
• Protection Class I: the fitting must be earthed
• Protection Class Il: the fitting is doubled insulated and does not require earthing
• Protection Class III: the fitting is low-voltage
• Minimum distance from lighted objects (meters)
• The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
• The armature is designed to work only with the indicated voltage. Different items require different working voltages.
• The luminaire can be used in combination with a dimmer
• The luminaire can be dimmed by the wall switch
• The reference liaht anale and liaht space of the luminaire
• This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste
• Take note of the symbols when connecting wires:

CONTACT

FittinQ B.V.

• Smaragdweg 52, 5527 LB Hapert,
• The Netherlands
• www.qazqa.nl.

FittinQ LTD

• 55 Baker Street,
• London, WIU 7EU
• United Kingdom

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>