STERNGLAS Selecta Smart Watch User Manual
- June 12, 2024
- sternglas
Table of Contents
STERNGLAS Selecta Smart Watch
Product Information
The product is a timepiece called “Selecta”. It requires manual winding to start the movement. The time can be set using the crown in different positions. The date can also be set using the crown.
Product Usage Instructions
Winding up the Timepiece
Before you can start using the timepiece, it needs to be wound up. To do so:
- Ensure the crown is in position 1.
- Rotate the crown clockwise about 15 times.
- If you hear a slight whirring sound, it indicates that the movement has started working.
Setting the Time
To set the time:
- Pull the crown to position 3.
- Turn the crown until the hands are in the correct position.
Setting the Date
To set the date:
- Push the crown in by one position, so it is in position 2.
- Turn the crown counterclockwise until the correct date is displayed.
- Push the crown back to the starting position (position 1).
Note : If your date changes at noon instead of midnight, wind your timepiece forward by 12 hours to correct this.
How to setup your timepiece
-
Before you can start, you need to wind up
your timepiece. To do so, wind the crown (in position 1) clockwise about 15 times. -
If you notice a slight whirring sound, the movement starts working.
-
Now you are ready to set the time. To do so, pull the crown to position 3 and turn until the hands are in the correct position.
-
To set the date, push the crown in by one position so that it is in position 2. Turn the crown counterclockwise until the correct date is displayed. Now you can push the crown back to the starting position (position 1).
Note : Your date changes at noon? This is because the movement does not „know” if it is noon or midnight. If so, simply wind your timepiece forward by 12 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>