SOTOMO K-03118DF One Piece Toilet Installation Guide

Model: K-03118DF

One-Piece Toilet

Specifications & Installation Guide

One-Piece Toilet

Key Features

(1) Efficient Flush Options: Jet siphon flush, dual flush: 1.1 GPF and 1.6 GPF, selective flushing helps reduce your water bill.

(2) Powerful Waste Removal: Map Flush rated at 1000 grams minimizes clogs, ensuring better waste removal and quieter operation.

(3) Anti-Clogging Design: Equipped with a fully-glazed 2″ trapway and siphon drainage to prevent blockages.

(4) Easy to Clean: The self-cleaning surface with nanomaterials and glaze simplifies maintenance, making the toilet easy to clean.

(5) Quiet and Safe: Soft close seat prevents lid slamming, protects the toilet, enhances safety, and eliminates the risk of pinching.

(6) Durable Construction: Made from fully vitreous china, this toilet is leak-proof and fired at a high temperature of 2246°F for lasting quality.

(7) Easy Installation: One-piece design with one-click installation seat cover for hassle-free setup.

(8) Certified Quality: cUPC certified and compliant with ASME standards, with EPA Watersense labeling for water efficiency.

Specifications

• Length: 27-3/4″(705 mm)
• Width: 15-3/4″ (400mm)
• Height: 27-1/8″ (690mm)
• Net Weight: 92.6LBS (42kg)

Installation

• Floor Mount
• Standard 12″ (305mm) Rough-in

Prior to Installation

Carefully remove the toilet from the packaging, ensuring that no parts are damaged. If you encounter any issues, please contact on at admin@sotomo.us.

Accurately measure the dimensions in accordance with the provided instructions and comply with relevant plumbing and building codes.

For your safety, use appropriate tools and wear protective equipment. At least two people are required since the product is fragile.

SOTOMO recommends hiring a licensed professional for all product installations to prevent discrepancies and ensure liability.

Included Accessories

Wax Ring (Gasket)     Dual- Flush Button      Nuts/Washers/Bolts

                            X2
Seat Cover                 Toilet seat cover Screw Set ( X 2)

Toilet Tank Lid                         Side Cover Sets (2)

Suggested Tools & Materials

Safety Glasses             Screwdriver            Wrench

Supply Line Inlet Hose     Tape Measure          Hacksaw

Level                          Putty Knife

(All the Items Above not Included in the Product)

Toilet Installation Instructions

Step 1 (optional): Remove the Old Toilet

(1) Turn off the water supply. Make sure the water supply valve is shut off before operation.

(2) Flush the Toilet to empty the tank. Remove any water left in the tank or bowl.
(3) Disconnect the supply line from the tank.
(4) Remove decorative caps. Unscrew nuts that attach the toilet to the floor.
(5) Remove toilet.
(6) If you are replacing the valve shut main water supply first.
(7) Remove the old closet bolts from closet flange. Clean old wax, putty, etc. from base area.
IMPORTANT NOTE REGARDING WATER SUPPLY: Before installation ensure that the water supply valve is located more than 8″ from the center of the drain to the center of the water supply valve on either side (see Figure 1).

NOTE: This is a true 12″ rough-in toilet from finished well to center of the drain (no less than 12″).

Figure 1

1. water supply valve
2. 6″(suggested height)
3. Finished Floor

Step 2: Rough-In the Toilet

Measure the well from behind the toilet to the middle of the closet flange. Your rough-in measurement should be 12″. (see Figure 2)

Figure 2

1. Bathroom Wall
2. Bathroom Floor
3. 12″ Rough-in
4. Closet Flange

Step 3: Install Closet Bolts

Place and slide two bolts into the closet flange channel that is parallel to the wall. (see Figure 3)

Figure 3

Step 4: Install Was Ring

Invert the toilet on the floor (use a cushion to prevent damage), evenly install the was ring around the waste flange with the tapered end of the ring facing the floor, align the toilet with the waste hole, and, with a rocking motion press the bowl down fully on the was ring and flange. Apply a thin bead of sealant around the toilet base. (see Figure 4)

Figure 4

1. Sealant (Not Included)
2. Wax Ring

Step 5: Place the Toilet onto the Flange

Place the toilet on the flange over the bolts. Remove the floor waste opening plug, and then place washers and nuts onto the bolts. Connect the flexible water supply hose (not included) to the inlet valve, finger-tight, but do not connect it to the water shut-off valve yet. Choose the appropriate 1/2″ or 7/8″ (adapter provided) supply line inlet hole based on the size of your supply line. (see Figure 5)

Figure 5

1. Nut
2. Washer
3. Bolt
4. 1/2″ or 7/8″ hose
   Recommended length: 18″-24″
   Supply line inlet hose
   (not included)

Step 6: Install Toilet

Alternate tightening the nuts until the toilet is securely sealed to the floor, being cautious not to over-tighten and risk cracking the ceramic.

Clean off any excess sealant around the have and apply cover caps to hide installation holes.

Connect the water supply and test for functionality and leaks. (see Figure 6)

Figure 6

1. Cap
2. Nut
3. Washer
4. Bolt

Step 7: Install Side Cover Caps

Install the plastic side cover into the toilet ceramic body’s mounting hole, and adjust it to the appropriate position. (see Figure 7)

Figure 7

1. Side Cover Sets

Installation Instructions for Toilet Seat

(We have pre-installed the first three steps at the factory.)

Step 1: Disassemble

Separate the cover cap and the hinge.

1. Pull

Step 2: Assemble the Hinges

Insert the screw and nut into the hinge hole. Attach the blind hole screw fixing to the bottom of the screw.

Step 3: Attach the Hinges

Insert the hinges with the blind holes screw fixings attached into the cot- responding holes on the toilet bowl. Lightly tighten the hinges using a screwdriver, leaving room for adjustments later.

Step 4: Adjust and Cover the Hinges

Attach the seat onto the hinges and adjust it as needed for proper alignment. Ensure that the hinges are at the most suitable angle for the correct installation of the toilet seat. Then, securely fasten the hinges and place the covers onto the hinges.

Step 5: Adjust and Attach the Seat

Attach the seat onto the hinges, once you hear a ‘click’ sound, it means the seat is installed correctly onto the hinges. (If the cover is not properly aligned, adjust it as needed following step 4 to ensure proper alignment).

Toilet Seat Usage

To detach, press the central button until it clicks and lid straight up. To reattach, align the hinge posts with the reference marks on the seat and push down until it clicks.

clicks                                       clicks

Care And Cleaning

Do Not Use In-Tank Bowl Cleaners.

The use of a high concentration of chlorine or chlorine-related products can seriously damage the fittings in the tank. This damage can cause leakage and property damage.

SOTOMO shall not be responsible or liable for any tank fitting failure or damage caused by the use of in-tank bowl cleaners.

Maintenance of Product Surface and Ceramics.

Wipe dust or stains with a soft wet cloth.

A wet soft brush, cloth or sponge may be used to clean the ceramic area.

Do not use abrasive cleaning solutions, such as alcohol, bleach, paint thinner, cresol, benzene, gasoline, etc.

Maintenance During Winter Season.

In the winter season, water inside the product may freeze after long periods of storage and non-usage. Please take precautions to prevent this.

Note:

Before connecting the product to the water supply, allow it to defrost for 30 minutes in a warm indoor environment.

In cases of extreme cold, freezing, wrap the water input line with a warm towel. Never pour hot water or use a hot dryer directly on the toilet.

Warranty

ONE YEAR LIMITED WARRANTY, SOTOMO products are crafted with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products. Should any defects in materials or craftsmanship under regular use be discovered within the first year of installation, SOTOMO will provide replacement parts at no charge or, at its discretion, replace any product or part of the product deemed defective under normal installation, use, service, or maintenance. This warranty applies only to the original purchaser. Proof of purchase will be required in the instance of a claim.

SOTOMO recommends all installations of SOTOMO products to be conducted by a licensed, professional plumber or contractor. SOTOMO will not be held responsible for any damage or product failure due to improper installation, misuse, or failure to utilize a licensed professional for installation. SOTOMO is not responsible for any installation or removal costs.

This One Year Limited Warranty Will Be Voided If:

• The installation recommendations were not followed by the installer.
• The product has been moved from its initial place of installation.
• The product has in any way been modified from its packaged state.
• The product has been subjected to improper maintenance, abuse, misuse, excessive use of chemicals, accidents, or other damages, etc.

SOTOMO makes no implication that its products comply with any local building or plumbing codes. It is the consumer’s responsibility and obligation to determine local code compliance prior to and during installation. This warranty extends only to the original purchaser and first consumer.

SOTOMO is not responsible for any special, incidental, or consequential damages associated with the installation, replacement, return, or use of the original purchaser’s product. This includes, but is not limited to: freight costs, labor, travel time, lost profit, home damages, and other contingent liabilities and costs (including, without limitation, costs associated with professionals or experts, investigations, audits, analyses, attorneys, and any other professional/hired services).

The SOTOMO warranty is a comprehensive and explicit limit of liability. All items not disclosed within the warranty are not addressable within the responsibility of SOTOMO. Certain states have variances regarding implied warranties; in those situations, we remain fully compliant.

If you have any questions or concerns, please contact us directly at admin@sotomo.us.

WARNING: Contents of your order may contain sharp and possibly other harmful pieces and may cause hazards to children and adults. SOTOMO is not responsible in any way for personal damages.

Thanks for Choosing SOTOMO

At SOTOMO, our mission is to provide the world with a healthy, hygienic and comfortable lifestyle.

We put our heart into designing each and every product, carefully balancing functionality, aesthetics, and materials. Our goal is to deliver superior products to our consumers, and we are truly grateful that you have chosen our products.

We look forward to hearing from each and every customer, and we are passionate about providing you with the best service possible. Please feel free to reach out to us at admin@sotomo.us if you have any questions.

Thank you for your trust and support.

SOTOMO LLC
Address: 17669 148TH PL NE, WOODINVILLE, WA, 98072, USA
E-mail: admin@sotomo.us
https://sotomo.us

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>