Lazada 962 2.4G Photoelectric Driver Instruction Manual
- June 1, 2024
- Lazada
Table of Contents
Lazada 962 2.4G Photoelectric Driver
Product Information
Specifications:
- Model: 2.4G photoelectric driver
- Frequency: 2.4GHz
- Power: Battery-operated
- Compliance: FCC Part 15
Product Usage Instructions
-
Power On/Off:
To turn the device on, slide the switch to the ON position. To turn it off, slide the switch to the OFF position. -
Setting Light Time:
Use the corresponding buttons labeled S, L, I, G, H, T, T, I, M, and E to adjust the light time settings. -
Color Adjustment:
Use the RGBIN buttons to cycle through different color options – Red (R), Green (G), and Blue (B). -
Programming Mode:
To program specific settings, toggle the ON/OFF buttons in the sequence indicated (e.g., ON ON ON ON 1234 OFF OFF OFF OFF).
FAQ:
-
Q: What should I do if the device causes interference?
A: If the device causes interference, try moving it to a different location or adjusting its settings. Ensure it is not placed near other electronic devices that may be causing interference. -
Q: Can I modify the device?
A: Modifying the device in any way not approved by the responsible party can void your authority to operate the equipment. Contact customer support for any customization needs.
Basic Operation Instructions
-
Copy coding and grouping: the remote control needs to be operated with the driver to operate the code to use, the method is as follows:
-
The drive and load lamp light source, a power supply connecting normal completion, select packet control lamp, the power supply is switched on, in turning on the power supply of the moment (see light source light during three seconds) according to the selected a group key ( ) ON, see the lights(light source) is “slow flash three times”, the code and data packet. (If the lamps are too many, repeat the above steps until the lights of the code are grouped and matched.
- Note: each drive can only be matched with a Groupon remote control at the same time; a remote control can match a myriad of drives, but a drive up to four remote controls at the same time.
-
Clear coding and regrouping: if changing the layout of the room, or the user’s interests change, want to change the previous packet
(encoded), regrouping of and need to the remote control LED lamp address code, clear, the method is as follows: -
Selected clearance code of lamps and lanterns, cut off the power, power is switched on again, within 3 seconds after the power supply is turned on and the lamp light, continuous according to the total open key or the corresponding ke Oy tN o open five times, that is, to see the lamp/light flash 6 times, confirming the Qing code successfully
-
After the success of the code, the operation process of re-grouping and coding and the operation of the first “copy coding and grouping” are completely consistent.
-
Nightlight function: find the night light button on the remote control, press after the lights whether in what state, light works in Nightlight mode
-
Remote control subsection switch function: press the remote control in the middle of the color key, and can choose the color. Choose fast: is a white, warm white, neutral light
-
Timing function: find the timing button on the remote control, pressing the first light flash indicates that the timing is 30 minutes; pressing the second light flashing twice indicates that the timing is 60 minutes; pressing the other total key ON or the corresponding key to cancel the timing.
-
Scene mode function: to find the remote control on the scene key, after pressing, the side of the light is open, or the auxiliary light open
-
The walls of the sectionalizing switches: the power supply uses advanced automatic synchronization technology, lights on after 3 seconds, the power will be automatically entered into the memory function, the wall switch electrical broken, and then power on, now the light is memory on a turn off the lights before state, followed by a wall switch to electric and broken, then the power into piecewise state, repeat switch can switch to distinguish: white, warm white, neutral light.
-
Energy saving key: press the energy-saving key, light t automatically encounters horsepower-savings, can which sasaveslectricity 50%.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>