Lazada SYT1 Wireless Headphone User Manual

USER MANUAL
SYT1 Wireless headphone

PRODUCT INTRODUCTION

1. With a 40mm Nd-Fe-B strong dynamic driver, SY-T1 offers a wide soundstage and delivers rich, delicate sound across balanced tri-frequencies. The stunning bass and 3D stereo effect provide an immersive and realistic experience.
2. Combined with ergonomic optimization, SY-Tl weighs only 180 grams and provides a more comfortable fit for all-day wearing.
3. SY-Tl is equipped with ENC dual microphones, effectively reducing external noise. It comes with a detachable ENC microphone as a gift, allowing commanders to stay ahead and seize the initiative in battle.
4. SY-Tl adopts the advanced Bluetooth 5.3, bringing you a more stable connection and stronger anti-interference capability. It ensures instant pairing, synchronized response, and keeps you online thrne lethal it an mina eaceinne 2nel hi nera-uuntrhiner
5. A low power Bluetooth solution, combined with a 400mAh capacity battery, allows for uninterrupted listening from dawn till dusk.
6. In game mode, the latency is reduced to as low as 50ms, ensuring audio and visual synchronization. With precise sound positioning, you can take the initiative in battle and fully enjoy the exhilarating gaming experience.

Specifications are subject to change without notice.

OPeration Introduction

1. Volume Up Short Press
   Next Track Long Press

2. Pause, Play Short Press
   Or Off Long Press
   Answer, Hang Up Short Press
   Reject Long Press
   Call Back Double Press

3. volume Down Short Press
   Previous Track Long Press

4. Build-in ENC Microphone

5. Detachable Mic Interface Audio Cable Interface

6. Type [ype C Charging Interface

Do’s and Don’ ts

1. keep the headphones dry and do not place them in humid areas. Do not expose them to sunlight for long periods of time, and avoid placing them in environments with excessively high or low temperatures.
2. Non-professionals are advised not to disassemble this product without authorization.
3. Please refrain from vigorously shaking or scratching this product with sharp objects.
4. Do not use chemical substances to clean this product.
5. Avoid charging this product for extended periods of time.
6. Do not use a charger with a current exceeding 1.5A for charging.

FAQ

How to pair bluetooth headset?
In bluetooth mode, the blue and red lights flash alternately. Search and click on the mobile phone for bluetooth pairing. When you hear “Connected” means successful paired, and the indicator light turns to blue.
How to change from wireless mode to wired mode?
Insert the 3.5mm audio cable plug into the audio input interface. At this time, the bluetooth headset will automatically power off, and it can be used as a normal headset. Other functions of the bluetooth headset will be useless (power off status) to save power.
How to charge the headset?
Insert the power cord into the headset and battery charger. The red light will be on during charging, and it will be off when the battery fully charged .
Why does the headset automatically turn off?
The headset will automatically turn off in 5 minutes when it is disconnected to bluetooth. If the battery of the headset is too low, you will hear the voice prompting “Battery Low”, and the headset will turn off. If the headset is not used for a long time, please charge it once per month to extend the battery life.

Warranty Card

We warrant this product to the original purchaser only, to be free from defects in materials and workmanship under normal use, for 90 days from the date of original purchase.
No warranty service will be provided if the headset is damaged due to the following reasons: Abnormal use: Break the headband, microphone, signal line or earshell.
Improper storage: For example, the headset exposed to moisture for a long time to make the speakers and microphones soaked.
° Maintenance not authorized.
Earmuff, sponge pad, and scratching of the shell are not covered by the warranty.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
RF wamning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>