INSIGNIA NS-MTRIBT10 Universal Tripod Bluetooth Kit User Guide
- June 16, 2024
- Insignia
Table of Contents
Quick Setup Guide
NS-MTRIBT10
Universal Tripod Bluetooth Kit
FEATURES
- Universal phone clip holds most phones with screens up to 5.5″
- Flexible, foam rubber legs wrap around objects
- Non-slip rubber feet provide stability
- Bluetooth remote control takes photos from a distance (works with most iOS and Android smartphones)
PACKAGE CONTENTS
- Tripod
- Bluetooth remote control (CR2032 battery included)
- Quick Setup Guide
Before using your new product, please read these instructions to prevent any damage.
USING YOUR TRIPOD
-
Turn the lock screw counter-clockwise to loosen the clip.
-
Push the folded clip into a horizontal position, then tighten the lock screw.
-
Push the body of the clip into a vertical position, then fold the top of the clip up.
-
Insert your smartphone into the clip in a landscape position.
-
Place the tripod on a table, floor, or other stable location. OR Wrap all three tripod legs around an object like a tree branch or railing.
Caution: Placing the tripod on an unsteady object or not attaching securely could damage your tripod or smartphone. -
Adjust the clip and tripod to point your phone in the direction you want.
USING YOUR REMOTE CONTROL
Pairing to your smartphone
- Slide the remote control’s power switch ON. The remote enters pairing mode and the LED blinks rapidly.
- On your smartphone, turn on Bluetooth, then put it in pairing mode. For more information, see the documentation that came with your phone.
- On your smartphone, select NS-MTRIBT10. The remote control pairs with your smartphone and the LED blinks slowly.
Note: Pressing the button when your phone is not in camera mode may cause unwanted functionality (such as changing the volume). Turn off the remote control when it is not in use.
Taking a photo
-
Pair your smartphone to the remote control. See “Pairing to your smartphone” for more information.
-
Open your smartphone’s camera app.
-
Press to take a single picture. OR
Press and hold to take a series of photos (if your smartphone supports this feature). -
When finished, slide the power switch OFF.
Note: The remote enters sleep mode and the LED turns off after 10 minutes of inactivity. Press to wake.
Replacing the remote battery
Note: The LED blinks quickly when the battery is low.
- Use a Phillips screwdriver to remove the screw, then slide off the battery cover and remove the old battery.
- Insert a new CR2032 battery with the + facing up, then slide on the battery cover and replace the screw.
TROUBLESHOOTING
Remote control will not pair with my phone
- Move your phone and remote control within 5 feet of each other.
- Make sure that your remote control is not paired to another phone.
- Make sure that you selected NS-MTRIBT10 on your phone.
- Turn your remote off, then on. Re-pair your remote control and phone.
- The remote control battery may be depleted.
Replace the battery.
“NS-MTRIBT10” does not appear on my phone
- Move your phone and remote control closer together.
- Put your remote control in pairing mode, then refresh your list of Bluetooth devices. For more information, see the documentation that came with your phone.
IMPORTANT SAFETY INSTRUCTIONS
- Do not store or expose these devices to excessive heat or cold, or use near any flame or fire.
- Do not oil or grease any part of the these devices.
- Do not use any solvents or thinners to clean these devices. Use only a mild detergent and wipe dry with a soft, lint-fee cloth.
- Do not exceed the load limit of the tripod (10 oz.).
- Do not use or store these devices in extremely hot environments (such as a parked car).
- Do not squeeze or drop these devices.
- Recycle or dispose of your batteries in accordance with your local regulations.
LEGAL NOTICES
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC Caution:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RSS-Gen & RSS-247 Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
RSS-102 Statement
This equipment complies with Industry Canada radiation exposure limits set
forth for and uncontrolled environment.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289
(U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered
in some countries. Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave
South, Richfield, MN 55423 U.S.A.
©2016 Best Buy. All rights reserved.
Made in China