Studebaker SB2149 Master Blaster Bluetooth Boombox Owner’s Manual
- June 1, 2024
- Studebaker
Table of Contents
- SB2149 Master Blaster Bluetooth Boombox
- Product Information
- Specifications:
- Safety Instructions:
- FCC Regulations Compliance:
- Operating Instructions:
- Maintenance:
- Q: Can I use the boombox with an extension cord?
- Q: How should I adjust the volume for safe operation?
- Q: What should I do if any trouble occurs with the
SB2149 Master Blaster Bluetooth Boombox
“`html
Product Information
Specifications:
-
Product Name: Master Blaster Bluetooth Boombox
-
Features: CD Player, AM/FM Stereo Radio, CD/USB MP3
Playback -
Output Power: 10 Watts RMS
Product Usage Instructions
Safety Instructions:
- Read and keep the user manual.
- Follow all warnings and instructions provided.
- Avoid using the boombox near water.
- Clean the unit with a dry cloth only.
- Ensure proper ventilation by not blocking any openings.
- Avoid placing the boombox near heat sources.
FCC Regulations Compliance:
Make sure to adhere to FCC regulations for safe operation. Refer
to the FCC ID provided for compliance details.
Operating Instructions:
- Keep the boombox within acceptable operating temperatures.
- Set volume control at a low setting before gradually increasing
for optimal sound quality.
Maintenance:
Protect your furniture by placing the boombox on a cloth or
carpet. Clean and dry the unit before use if exposed to moisture.
If any issues arise, disconnect the power and seek professional
servicing.
FAQ
Q: Can I use the boombox with an extension cord?
A: To prevent fire or shock hazards, avoid using this plug with
an extension cord. Ensure the blades can be fully inserted into the
outlet.
Q: How should I adjust the volume for safe operation?
A: Start at a low setting and gradually increase the volume
until it is comfortable and clear without distortion.
Q: What should I do if any trouble occurs with the
boombox?
A: Disconnect the AC adapter and consult qualified personnel for
servicing.
“`
Master Blaster Bluetooth Boombox
with CD Player, AM/FM Stereo Radio, CD/USB MP3 Playback, 10 Watts RMS output
SB2149 OWNER’S MANUAL
B
WARNING
TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
The Caution Marking is located at the back enclosure of the apparatus. The
Rating plate is located at the back enclosure of the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings.
4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean
only with dry cloth. 7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s
instructions. 8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers) that produce heat. 9. Do not defeat the
safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet. 10. Protect the
power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus. 11. Only use
attachments/accessories specified by the manufacturer. 12. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer, or
sold with the product. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over. 13. Unplug this
apparatus during lightning storms or when unused for a long period of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped. 15. This appliance shall not be exposed
to dripping or splashing water and no object filled with liquids such as vases
shall be placed on the apparatus
1
16. Do not overload wall outlet. Use only power source as indicated. 17. Use
replacement part as specified by the manufacturer. 18. Upon completion of any
service or repairs to this product, ask the service technician to
perform safety checks. 19. Power Sources – This product should be operated
only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to
the operating instruction. 20. Object and Liquid Entry – Never push objects of
any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product. 21. Damage Requiring
Service – Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions: a) When the power-
supply cord or plug is damaged, b) If liquid has been spilled, or objects have
fallen into the product, c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating
instructions. Adjust
only those controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to its
normal operation. e) If the product has been dropped or damaged in any way,
and f) When the product exhibits a distinct change in performance – this
indicates a need for service. 22. Mains plug is used as disconnect device and
it should remain readily operable during intended use. To disconnect the
apparatus from the mains completely, the mains plug should be disconnected
from the mains socket outlet completely. 23. Battery shall not be exposed to
excessive heat such as sunshine, fire or the like. 24. Excessive sound
pressure from earphones and headphones can cause hearing loss. 25. Minimum
distances of 4 inches around the apparatus for sufficient ventilation. 26. The
ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc. 27. No naked flame
sources, such as lighted candles, should be placed on the apparatus. 28. The
use of apparatus in moderate climates. 29. Attention should be drawn to the
environmental aspects of battery disposal.
SAVE THESE INSTRUCTIONS
2
COMPLIANCE WITH FCC REGULATIONS
FCC ID: 2BABY6361401USB
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause
undesired operation. This equipment has been tested and found to comply with
the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation
between the equipment and receiver. – Connect the equipment into an outlet on
a circuit different from that to which the receiver is
connected. – Consult the dealer or an experienced radio/TV technician for
help. WARNING Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
CAUTION
Follow the advice below for safe operations.
ON PROTECTION AGAINST LASER ENERGY EXPOSURE · As the laser beam used in this
compact disc player is harmful to the eyes, do not attempt to
disassemble the casing. · Stop operation immediately if any liquid or solid
object should fall into the cabinet. · Do not touch the lens or poke at it. If
you do, you may damage the lens and the player may not
operate properly. · Do not put anything in the safety slot. If you do, the
laser diode will be ON when the CD door is
still open. · If the unit is not to be used for a long period of time, make
sure that all power sources are
disconnected from the unit. Remove all batteries from the battery compartment.
· This unit employs a laser. The use of controls or adjustment or performance
of procedures other
than those specified here may result in exposure to hazardous radiation.
3
Caution: – Any use of the controls or performing any of the procedures in a
way other than those specified
herein may result in hazardous radiation exposure. – This unit should not be
adjusted or repaired by anyone except qualified service personnel.
ON PLACEMENT · Do not use the unit in places which are extremely hot, cold,
dusty or humid. · Place the unit on a flat and even surface. · Do not restrict
the air-flow of the unit by placing it in a place with poor ventilation, by
covering
it with a cloth or by placing it on a carpet.
ON CONDENSATION · When left in a heated room where it is warm and damp, water
droplets or condensation may
form inside the unit. · When there is condensation inside the unit, the unit
may not function normally. Let it stand for
1 to 2 hours before turning the power on, or gradually heat the room up and
dry the unit before use.
Should any trouble occur, disconnect the AC Adapter and refer servicing to
qualified personnel.
KEEP YOUR SB2149 WITHIN ACCEPTABLE OPERATING TEMPERATURES
The built-in rechargeable battery should not be exposed to excessive heat such
as sunshine, fire and humidity. Use this unit where the ambient temperature is
between 0º and 45ºC (32º to 113ºF). Using this unit in very hot conditions can
permanently shorten battery life and deform the enclosure which is not covered
by the warranty. Store this unit where the temperature is between 20º and
60ºC (-4º to 140ºF). Do not leave the unit in your car because temperatures in
parked cars can exceed this range.
Protect your SB2149 from higher temperature conditions and activities that
might cause damage to the unit or affect performance
· Do not leave this unit in direct sunlight. · Do not leave this unit in a car
on a hot day. · Do not use certain features in hot conditions or direct
sunlight for an extended period of time.
PROTECT YOUR FURNITURE
This system is equipped with non-skid rubber feet’ to prevent the product from moving when you operate the controls. These
feet’ are made from non-
migrating rubber material specially formulated to avoid leaving any marks or
stains on your furniture. However certain types of oilbased furniture
polishes, wood preservatives, or cleaning sprays may cause the rubber feet’ to soften and leave marks, or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere and apply these pads to the bottom of the rubber
feet’
before you place the product on fine wooden furniture.
4
DEAR STUDEBAKER ® CUSTOMER
Selecting fine audio equipment such as the unit you’ve just purchased is only
the start of your musical enjoyment. Now it’s time to consider how you can
maximize the fun and excitement your equipment offers. This manufacturer and
the Electronic Industries Association’s Consumer Electronics Group want you to
get the most out of your equipment by playing it at a safe level. One that
lets the sound come through loud and clear without annoying blaring or
distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to
higher volumes of sound. So, what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by setting your equipment at a
safe level BEFORE your hearing adapts.
To establish a safe level: Start your volume control at a low setting. Slowly
increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level: Set the dial and leave it
there. Taking a minute to do this now will help to prevent hearing damage or
loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For a Lifetime Used wisely, your new sound equipment
will provide a lifetime of fun and enjoyment. Since hearing damage from loud
noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise.
Customer’s Record: The serial number of this product is found on its back
cover. You should note the serial number of this unit in the space provided as
a permanent record of your purchase to aid in identification in the event of
theft of loss.
Model Number: SB2149
Serial Number:
CONTENTS OF YOUR PRODUCT
Main Unit
X 1
AC Adapter (DC 12V 1.5A
)
X 1
User Manual
X 1
5
LOCATION OF CONTROLS
1
2 3 4 5 6 7 8 9 10 11 12 13
25
MIN
MAX MIN
MAX L
BLUETOOTH
R
OUT
FM 88 90 92 94 96 98 100 102 104 106 108
AM 54 60
USB
70 80 90 100 120 140
170 kHz x10
14 15 16 171819 20 21 22
26
25
FM 88 90 92 94 96 98 100 102 104 106 108
AM
54
60
USB
70
80
90 100
120 140
170 kHz x10
23 24
DC 12V 1.5A
27
28 31
27
29 30
1 MASTER VOLUME 2 TREBLE KNOB 3 BASS KNOB 4 BALANCE KNOB 5 FM TELESCOPIC ANTENNA 6 CHARGE INDICATOR 7 BT INDICATOR 8 FM ST. INDICATOR 9 POWER INDICATOR 10 FUNCTION SWITCH 11 BAND SWITCH 12 AUX IN JACK 13 TUNING KNOB 14 LED DISPLAY 15 STOP BUTTON 16 +10/LIGHT SHOW BUTTON
17
SKIP/FAST BACKWARD BUTTON
18 REPEAT/PROGRAM BUTTON
19 CD/USB MODE; PLAY/PAUSE ;
BLUETOOTH PAIR BUTTON
20 BLUETOOTH OUT BUTTON
21
SKIP/FAST FORWARD BUTTON
22 DIAL POINTER
23 USB PORT
24 HEADPHONE JACK
25 TWEETER
26 MULTI COLOR LIGHT SHOW LED
27 WOOFER
28 CD COMPARTMENT
29 CARRYING HANDLE
30 DC INPUT JACK
31 CD DOOR LATCH
6
POWER SOURCE
This unit can be operated using either AC power, the built-in Li-Polymer
rechargeable battery. AC POWER OPERATION An AC-DC Adapter with the output of
DC 12V, 1.5A (included) is required for operating the main unit when using AC
power mode. To connect the AC-DC Adapter to the unit and 120V~ 60Hz AC Outlet:
- Firmly and securely insert the DC plug of the Adapter into the DC Jack on
the back of the unit. 2. Plug the AC Adapter plug into the 120V AC outlet.
CHARGE LED will be lighting Red during
battery charging. Connecting this system to any other power source may cause damage to the system 3. Slide the FUNCTION switch on the top panel to RADIO, CD/USB or BLUETOOTH/AUX mode to turn on the unit, the POWER INDICATOR will light. Note: When the unit is not operated for long periods of time, unplug the AC Adapter from the unit
and wall outlet.
1.5A
BUILT-IN RECHARGEABLE BATTERY OPERATION 1. This unit will also operate using the built-in Lithium rechargeable battery. Fully charge the
built-in rechargeable battery before first use, the CHARGE INDICATOR will turn from Red to Green when the built-in battery is fully charged. 2. Unplug the DC INPUT jack of main unit. The unit will enter Battery Operating mode automatically. LOW BATTERY INDICATION 1. When the built-in battery power remains around 5%, the CHARGE INDICATOR will light Red and flash, please connect the unit to AC Adapter for charging. 2. After prolonged use, the battery voltage may discharge, and operation might become intermittent. When this happens, please recharge the internal battery.
7
CHARGING INSTRUCTIONS
CHARGING THE BATTERY WITH THE INCLUDED AC ADAPTER 1. Charge the built-in
Lithium battery a minimum of 5 hours prior to first use. Firmly and securely
insert the DC plug of the Adapter into the DC Jack on the back of the unit. 2.
Plug the AC Adapter plug into the 120V AC outlet. Connecting this system to
any other power
source may cause damage to the system. 3. When the AC power is connected, the
battery charging indicator will light solid Red showing
that the internal battery is being charged. 4. After the battery is fully
charged, the charging indicator will turn to solid Green.
Notes: 1.) Charging time will vary if you are listening to music while
charging the internal battery. We
recommend you place the unit in Power off mode during the charging process or
until SB2149 batteries are fully charged. 2.) To prolong the life of a
rechargeable battery, it is recommended to completely discharge it before
fully charging it again. 3.) Rechargeable batteries need to be cycled for
maximum performance and longer battery life. If you don’t use the player that
often, be sure to recharge the battery at least once a month in order to keep
the internal battery working properly.
Battery Note and Care · Do not burn or bury batteries. · Do not puncture or
crush. · Do not disassemble. · Recycle Lithium batteries. Do not dispose of in
the trash. · Use only chargers rated for Lithium cells. Be sure the charger’s
voltage and current
settings are correct for the battery pack being charged. · Charge batteries on
a fireproof surface away from flammable items or liquids. · Batteries should
NEVER be left unattended while charging. Only adults should charge the
batteries. · Follow the manufacturer’s instructions for charging the product
and do not charge longer
than recommended. Unplug the charger when the battery is charged or not in
use.
NOTE: These speakers are not magnetically shielded and may cause color
distortion on the screen of some TVs or video monitors. To avoid this, you may
need to move the speakers further away from the TV or monitor if unnatural
color shifts or image distortion occurs.
RADIO OPERATION
1. Slide the FUNCTION switch to RADIO position, the unit will be “On” and
power LED indicator lights.
2. Select the desired AM or FM mode by switching the AM/FM/FM ST. BAND
SELECTOR on unit top panel.
3. Tune to your desired station with the TUNING knob. If FM STEREO mode is
selected and you tune to an FM Stereo station, the FM STEREO LED Indicator
will light.
4. Adjust the MASTER VOLUME knob to obtain the desired sound level.
FM & FM-STEREO RECEPTION Set the BAND SELECTOR to “FM” position. Stations will
now be received in MONO mode.
When an FM station is weak or distorted, listening is usually improved by
switching the band selector to the FM (mono) position. Set the band selector
to “FM-ST” position to receive stereo broadcasts. The FM-Stereo LED indicator
will light up to show an FM stereo station is detected.
8
TIPS FOR BEST RADIO RECEPTION AM – The AM antenna is built inside the radio.
If AM reception is weak, change the position of the
unit until the internal antenna picks up the strongest signal. FM – If a
stereo broadcast program is being received, the FM STEREO INDICATOR will
light.
During FM Stereo reception, always keep the FM TELESCOPIC ANTENNA fully
extended for best performance. However, if FM reception is weak, try
repositioning the unit near an open window until you get the best reception.
CD OPERATION
PLEASE READ THIS IMPORTANT INFORMATION: CD mechanisms used in devices like
this are designed to fully read all commercial CDs. They will also read self-
compiled CD-R/CD-RW discs, but it may take up to 10 seconds for playback to
start. If playback does not start, it is likely due to the quality of the
CD-R/RW disc and/or the compatibility of the CD compilation software. The
manufacturer is not responsible for the playback quality of CD-R/RW discs. Do
not attach a label or seal to either side of the CD-R/RW disc. It may cause a
malfunction.
1. Slide the FUNCTION switch to CD/USB position. The display will show “- -” briefly. If no CD
has been loaded in the CD compartment, LED display will change to show “no”.
2. Grip the “OPEN” mark on the CD Door and pull gently to open it.
3. Carefully load an audio CD with its label side OUTward in the CD compartment then gently
close the CD door.
4. The player will start reading TOC of the disc, total number of tracks on the CD will appear
on the LED DISPLAY after a few seconds.
5. Press the PLAY/PAUSE button to start playing.
6. Adjust the MASTER VOLUME knob to obtain the desired sound.
7. To temporarily stop playing, press the PLAY/PAUSE Button. The play/pause indicator
will be flashing. To resume playing, press the PLAY/PAUSE
Button again. The
play/pause indicator will be solid on.
8. You can skip up or down to a specific track number by pressing the SKIP BACKWARD
button or SKIP FORWARD
button. The LED Display will indicate the correct track
number selected.
9. To locate a particular section within a track, press and hold the
/ button until the
section is found.
10. To stop playing, press the STOP button.
11. Slide the Function switch to POWER OFF position to off the unit after listening.
+10 Button Control Tap the +10/LIGHT SHOW button once to advance the music search by increment of 10 tracks.
REPEAT MODE Repeat 1 To repeat the current track, press the REPEAT BUTTON once, the REPEAT INDICATOR will flash in LED display. The track will continue to play until the repeat function is turned off.
Repeat All To repeat all the tracks, press the REPEAT BUTTON twice, the REPEAT INDICATOR will be solid on. All the tracks on the disc will be played repeatedly.
To Cancel Repeat Function: Press the REPEAT BUTTON until REPEAT indicator goes
off from LED display.
9
PROGRAM OPERATION
This function allows the tracks to be played in a programmed sequence.
NOTE: Programs can only be set in STOP mode.
1. In CD stop mode, press REPEAT/PROGRAM button, the PROG indicator will light and
Program Number “P01” will show on LED display.
2. Press the SKIP or button to select the desired track, the last or first track number
“1” will blink (MP3 CD will not blink) on the LED display to prompt for input.
3. Press the PROGRAM button to confirm the selection. Program Number advances to “P02”.
4. Repeat step 2 to 3 to program up to maximum of 20 tracks.
5. When a maximum of 20 tracks have been programmed, the LED display will show “FUL” to
indicate program is full.
6. When you have completed programming, press the PLAY/PAUSE
button to start
playing. Both PROG and Play/Pause indicators are lighting steadily.
7. To cancel programmed play, press the STOP button twice. PROG indicator goes off.
USING TREBLE/BASS/BALANCE CONTROL KNOBS
· TREBLE: Adjust TREBLE level of music playback. · BASS: Adjust BASS level of
music playback. · BALANCE: Adjust BALANCE for balance left and right speaker.
USB OPERATION
The unit is designed to play MP3 files stored in the USB flash-drive. If the
files on the USB device do not conform to the MP3 standard, they may not be
played.
1. Slide the FUNCTION switch to CD/USB position. Press and hold the
CD/USB/PAIR/ button until USB mode indication “USB” shows on LED display and
USB indicator is flashing.
2. Insert your USB flash-drive into the USB port, the unit will start to read
the USB flash-drive. Notes: 1.) USB supports flash drive capacity up to 32 GB
maximum. 2.) Due to various USB flash drives in the market, please always fold
down the carrying handle before inserting USB flash drive into the USB port.
3.) When carrying this unit, be sure your USB flash drive is not taller than
the space under the carrying handle to avoid damaging.
3. After reading the USB flash-drive, the unit will display the total number
of files on the flash-drive.
USB Playback After reading the USB flash-drive, press the PLAY/PAUSE button
once, the first track/file on the USB flash-drive will be played back. The
“USB” and “PLAY/PAUSE” indicators will be solid on during playback.
Play/Pause Control To temporarily stop playing, press the button, music
playback will be paused, and the PLAY/PAUSE indicator will be blinking. Press
the button again to resume playback.
Stop Playback To stop playback, press the STOP button on the unit. The total
number of tracks/files on the USB flash-drive will be shown on the LED
display.
10
Skip Track During playback, press the SKIP backward or next track/file.
or forward
buttons to skip to the previous
+10 Control Tap the +10/LIGHT SHOW button to advance the music search by increments of 10 tracks.
REPEAT MODE Repeat 1 To repeat the current track, press the REPEAT/PROGRAM BUTTON once, the REPEAT INDICATOR will flash in LED display. The track will continue to play until the repeat function is turned off.
Repeat All To repeat all the tracks, press the REPEAT BUTTON twice, the REPEAT
INDICATOR will be solid on. All the tracks on the disc will be played
repeatedly.
To Cancel Repeat Function: Press the REPEAT BUTTON until REPEAT indicator goes
off from LED display.
Programmed USB playback This unit can be programmed to play up to 20
tracks/files in USB mode. 1. Plugged in your flash-drive into USB port, make
sure unit is in stop mode. 2. Press REPEAT/PROGRAM button, the PROGRAM
Indicator will light and program
Channel Number “P01” will show on the LED DISPLAY. 3. Press or button to
select the track to be programmed, the last or first track number
“1” will show on the LED DISPLAY to prompt for input. 4. Press the PROGRAM
button again to store selection. The Program Channel Number will
change to “P02”. 5. You may repeat steps 2 – 3 to program as many as 20
tracks. When the memory is full,
“FUL” will show on the LED DISPLAY. 6. Press the PLAY/PAUSE button to start
the programmed play. 7. Press STOP button once to stop playback. 8. Press the
button to resume programmed play. 9. To cancel programmed play, press the STOP
button twice.
BLUETOOTH OPERATION
PAIRING A SMARTPHONE OR BLUETOOTH ENABLED DEVICE The Bluetooth feature enables
you to stream and play the digital music on your Bluetooth enabled device to
your unit. (make sure AUX cable is not plugged into AUX IN jack). 1. In power
on mode, slide the FUNCTION switch to Bluetooth /AUX position, the blue
Bluetooth indicator will flash. 2. The unit will start in auto connection mode
and search for a previously paired device that is
active and in range (30 feet/10 meters). If found, a brief welcome melody will
be heard and the blue Bluetooth indicator will change to solid on. If no
active device is found, the unit will switch to interactive pairing mode and
the blue Bluetooth indicator keeps flashing. 3. To establish a new link, turn
on the Bluetooth function of your Bluetooth enabled device and enable the
search or scan feature to find “SB2149” in the list of discoverable Bluetooth
devices. Select the “SB2149” from your available device list when it appears
on its screen and a brief welcome melody will be heard if pairing and
connection is successful. If you are asked for a password, enter “0000”.
11
4. If no successful pairing and connection is made within 5 minutes, the unit
can enter manual pairing mode. You need to press and hold the PAIR/ button
until blue Bluetooth indicator flashes to initiate a pairing/connecting
request to a new or old Bluetooth enabled device. Follow step #3 to complete
the process.
5. After successfully pairing and connecting your device with SB2149, the
unit will emit a brief welcome melody and the blue Bluetooth indicator will
change to solid on. You can now play music from your Bluetooth enabled device
wirelessly to the SB2149.
6. If you want to connect the SB2149 to another new external Bluetooth
enabled device while paired with another device, press and hold the PAIR
button for few seconds to disconnect the existing connection. The unit will
emit two short beeps and the blue Bluetooth indicator will begin to flash.
Repeat steps #3 to #4 above to establish a new pairing.
7. Rotate the VOLUME CONTROL on the top panel to increase the listening
volume gradually until a comfortable listening level is reached.
8. Press the PLAY/PAUSE BUTTON to control play/pause. 9. Press the SKIP
FORWARD BUTTON to skip to next song and SKIP BACKWARD
BUTTON to skip to previous song.
Notes: · If you cannot pair the unit with your Bluetooth enabled device, try
solving the problem by
turning the unit power off, then power on, and then starting the pairing
process again. · The Bluetooth function of the unit will remain paired unless
the paired device goes out of
range of 30 feet (10 meters). If the broken link is re-established within 20
seconds, the SB2149 will reconnect to the current paired device automatically.
Otherwise, you will need to make a manual connection again later. · You may
need to turn off the Bluetooth function of the paired external device first
before make a new link. · Refer to manual of your smartphone or external
Bluetooth enabled device for correct Bluetooth operation instructions since it
may vary from model to model. · If your Bluetooth enabled device does not
support A2DP, it will not play the music through the SB2149 system even after
it is paired and connected successfully. · If you are pairing and connecting
your personal computer to the SB2149 using Bluetooth, you may need to set the
SB2149 as your computer’s default sound device.
RE-LINKING TO A SMARTPHONE OR BLUETOOTH ENABLED DEVICE Even if your smartphone
or Bluetooth device is already paired with the SB2149 and with both Bluetooth
functions turned on, they can become unlinked at some point due to intentional
manual disconnection or undesirable external signal interferences or over-
range for more than 10 seconds. If this happens, the unit will emit two short
beeps. You can re-link them and resume play by: 1. Select “SB2149” from the
device list on your smartphone or Bluetooth device. The SB2149
should re-link to your Bluetooth enabled device within 5 seconds. 2. Tap the
play button of the music player on your Bluetooth enabled device to resume
playback.
Bluetooth Out (Transmitter) 1. POWER on the unit, slide the FUNCTION switch to
desired function mode. Bluetooth Out is
disabled while the FUNCTION switch is turned to Bluetooth Receive/In and AM or
FM radio modes. 2. Press the BLUETOOTH OUT button, unit is in Bluetooth
transmit pairing mode and Bluetooth indicator flashes Green.
12
3. Set your Bluetooth receiver such as headphone or speaker to ON and begin
searching for devices. NOTE: 1.) If you have several Bluetooth receivers,
switch off those receivers that are not in use and place the one to be linked
near the unit to avoid SB2149 linking to other unwanted Bluetooth enabled
devices. 2.) The effective distance between your external device and this
apparatus is within 10 meters (30 feet).
4. SB2149 will auto scan and pair with your Bluetooth receiver nearby, Pair
indicator will change to light Green steadily to indicate a connection has
been established.
5. Play music on SB2149 in CD, USB, or AUX mode, unit speaker sound will be
off, you can listen to music by using your Bluetooth receiver such as a
headphone or speaker wirelessly.
6. If you want change to pair with another Bluetooth Enabled Device, switch
off the Bluetooth function of your Bluetooth receiver which was paired
previously. Press the BLUETOOTH OUT button to turn off the function and press
the BLUETOOTH OUT button again to pairing mode (repeat step 2 to 5).
7. Press the BLUETOOTH OUT button when you finish listening in Bluetooth
transmitter mode, Green LED will be off and unit speaker will sound again.
Notes: 1.) When Bluetooth Receive/In or AM/FM Radio modes are in use, the
Bluetooth
Transmit/Out function is disabled. 2.) There will be a brief sound delay when
enabling the Bluetooth Transmit/Out function 3.) Bluetooth Out (Transmitter)
can only pair with Bluetooth receiver such as headphone or
speaker for music streaming wirelessly. Use your Bluetooth device volume
control if necessary.
AUX IN OPERATION
You can play other music sources (iPod, MP3 or other digital audio players)
through the speakers of the unit by connecting the AUX IN JACK to your
external player’s audio out jack or headphone jack. 1. Plug one end of a 3.5mm
audio cable (not included) into the AUX IN JACK and the other
end of the cable to the headphone jack of your digital audio player. 2. Slide
the FUNCTION switch to the Bluetooth /AUX position. 3. Turn on and start
playing the external device you plugged into the AUX IN JACK. 4. Slowly adjust
both the volume controls of your unit and the external device until you reach
a comfortable listening level. 5. Turn off both the external audio player and
this unit after use. Unplug the audio cable from
AUX IN jack. Notes: · If you connect the unit to the Line-Out Jack of your
external device, you only need to adjust
the VOLUME CONTROL of your unit. If you connect to the Headphone Jack of your
external device, you may need to adjust both the volume controls of your
external device and the unit to obtain the desirable listening level. ·
Remember to turn off the unit when you have finished listening. Don’t forget
to switch off the power of your external audio device as well.
13
USE HEADPHONES (NOT INCLUDED)
Inserting the plug of your stereo headphones (not included) into the headphone
jack located on the top panel will enable you to listen in private. When using
headphones, the speakers will be disconnected.
Read this Important Information before Using Your Headphones 1.) Avoid
extended play at very high volume as it may impair your hearing. 2.) If you
experience ringing in your ears, reduce the volume or shut off the unit. 3.)
Keep the volume at a reasonable level even if your headset is an open-air type
designed to
allow you to hear outside sounds. Please note that excessively high volume may
still block outside sounds.
LED LIGHT SHOW
– To turn off the LED light show, press and hold the +10/LIGHT SHOW button. –
To turn on the LED light show, press and hold the +10/LIGHT SHOW button once
again. Note: If the brightness is glaring, turn on room lights or turn off LED
light show.
RESETTING THE UNIT
In case of malfunction due to electrostatic discharge, reset the unit by
sliding the FUCTION switch to POWER OFF position to reset the unit. Wait for
30 seconds before power on the unit again.
CARE AND MAINTENANCE
1. Do not subject the unit to excessive force, shock, dust, or extreme
temperature. 2. Do not tamper with the internal components of the unit. 3.
Clean your unit with a dry cloth. Solvent or detergent should never be used.
4. Avoid leaving your unit in direct sunlight or in hot, humid, or dusty
places. 5. Keep your unit away from heating appliances and sources of
electrical noise such as
fluorescent lamps or motors. 6. If drop-outs or interruptions occur in the
music during CD play, or if the
CD fails to play at all, its bottom surface may require cleaning. Before
playing, wipe the disc from the center outwards with a good soft cleaning
cloth.
CLEANING THE UNIT · To prevent fire or shock hazard, disconnect your unit from
the AC power source when
cleaning. · The finish on the unit may be cleaned with a dust cloth and cared
for as other furniture, use
caution when cleaning and wiping the plastic parts. · If the cabinet becomes
dusty, wipe it with a soft dry dust cloth. Do not use any wax or polish
sprays on the cabinet. · If the front panel becomes dirty or smudged with
fingerprints it may be cleaned with a soft
cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while
cleaning.
14
TROUBLE SHOOTING GUIDE
Symptom The unit does not respond (no power)
Unit is ON but there is low or no volume AM/FM no sound
Possible Cause The unit is disconnected from the AC outlet. The AC outlet has
not power. Volume set too low.
Unit not in Radio mode.
Bluetooth No Sound
Unit is not linked with your Bluetooth enabled device. Unit placement out of range.
Your Bluetooth enabled device
Volume set too low.
Noise or sound distorted Station not tuned properly.
on FM broadcast
FM: telescopic antenna is not
fully extended.
AM: Internal antenna is not
positioned correctly.
USB player will not play Unit not in USB function mode.
Can’t read USB data.
CD player will not play CD skips while playing
Unit not in CD function mode. The CD is installed incorrectly. If the CD is self-compiled, the media used may not be compatible with the player. Disc is dirty or scratched.
Intermittent sound from Dirty or defective disc.
CD Player
Dirty pick up lens.
Sound is distorted
Player is subject to excessive shock or vibration. Volume level is set too high. Sound source is distorted.
Unit gets warm after extended play at high volume
This is normal.
Solution Reconnect to the AC outlet.
Try the unit on another outlet. Slowly rotate the MASTER VOLUME knob to
increase the volume level. Slide FUNCTION switch to select RADIO. Go through
“Bluetooth Operations” process to link the speakers. Relocate the unit within
Bluetooth operating range (30 feet) Increase Volume level of your Bluetooth
enabled device. Fine tune the FM broadcast station. Fully extend the FM
telescopic antenna. Reposition the unit until the best reception is obtained.
Slide FUNCTION switch to CD/USB and long press the CD/USB/PAIR/ button until
USB indicator is flashing. USB flash drive at fault, change to another good
one. Slide FUNCTION switch to select CD. Insert CD with label side outward.
Use better quality blank media and retest.
Wipe CD with clean cloth or use another disc. Clean or replace the defective
disc. Use a CD-lens cleaning disc to clean the lens. Relocate the player away
from shock or vibration. Decrease the volume. Try a different sound source. If
you are using an external sound source like older generations of iPod, try
reducing the output volume on the device itself. Also try turning bass boost
OFF or change the EQ setting. Turn the unit off for a period of time or lower
volume
15
Radio Frequency Range
Audio Output Power Tweeter Woofer Bluetooth USB
SPECIFICATION
: AM: 530 1710 KHz : FM: 88 108 MHz : 2 X 5W (RMS) : 2 x 1.5 inch / 6 ohms
: 2 x 4 inch / 6 ohms : V5.3 : Support USB device up to 32GB
Power Source :
AC Adapter
: Input AC 120V~ 60Hz
Output DC 12V 1.5A
Built-in Rechargeable Lithium Battery : DC 7.4V , 2200mAh
Due to continuing improvement, the features and the design are subject to
change without notice.
At Spectra, environmental and social responsibility is a core value of our
business. We are dedicated to continuous implementation of responsible
initiatives with an aim to conserve and maintain the environment through
responsible recycling. Please visit us at http://www.spectraintl.com/green.htm
for more information on Spectras green initiatives or to find a recycler in
your area.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Spectra Merchandising Intl,
Inc. is under license. Other trademarks and trade names are those of their
respective owners.
16
1 YEAR LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from
defective materials or factory workmanship for a period of 1 year from the
date of original customer purchase and provided the product is utilized within
the U.S.A. This warranty is not assignable or transferable. Our obligation
under this warranty is the repair or replacement of the defective unit or any
part thereof, except batteries, when it is returned to the SPECTRA Service
Department, accompanied by proof of the date of original consumer purchase,
such as a duplicate copy of a sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA for
warranty service. If the product is repaired or replaced under warranty, the
return charges will be at SPECTRA’s expense. There are no other express
warranties other than those stated herein.
This warranty is valid only in accordance with the conditions set forth below:
- The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is demonstrated. b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the descriptions
and warnings covered within the user manual or non-SPECTRA approved modifications. c. Claims are made within the warranty period. 2. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with electrical codes or SPECTRA user manual specifications, or failure to provide reasonable care and necessary maintenance as outlined in the user manual. 3. Warranty of all SPECTRA products applies to residential use only and is void when products are used in a nonresidential environment or installed outside the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully and send it freight prepaid to SPECTRA at the address shown below. IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown above, please include a proof of purchase (dated cash register receipt) so that we may establish your eligibility for warranty service and repair of the unit without cost. Also include a note with a description explaining how the unit is defective. A customer service representative may need to contact you regarding the status of your repair, so please include your name, address, phone number and email address to expedite the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $80.00 to cover the cost of repair, handling and return postage. All out of warranty returns must be sent prepaid.
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at custserv@spectraintl.com for updated information on the unit requiring service. In some cases the model you have may be discontinued, and SPECTRA reserves the right to offer alternative options for repair or replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC. 4230 North Normandy Avenue, Chicago, IL 60634, USA. 1-800-777-5331
To register your product, visit the link below to enter your information. http://www.spectraintl.com/wform.htm
0124
Printed in China (SB2149SB) (SB2149BB) (SB2149RB) (SB2149RGB) (SB2149TEB)
17