smart home DC307A Emitter Control System Instruction Manual

: June 1, 2024
: Smart Home

Table of Contents

smart home DC307A Emitter Control System
FEATURES
Matchable R Tubular Motor Set up
Matchable DC227/DC228 Tubular Motor Set up
Product Specifications:
Frequently Asked Questions (FAQ):
Read User Manual Online (PDF format)
Download This Manual (PDF format)

smart home DC307A Emitter Control System

INSTRUCTION MANUAL

DC307A; DC313

FEATURES

Input vottage: 3V(CR2430)
Transmitting friquency: 433.92MHz
Transmitting 20 milliwatt
Operating temperature: -20C to 55C
Transms.slon di mince: 200 meten open offk:e 3!i ~non two walls

Transmitter: You can choose single channel (0c30s(A/6) ) ,five channels(cs0s4/G/e) ), Each indicator light means one control channel. Press “channel choose” button P1-(indicator move left side) or P1+(indicator move right side) to change the channel. On the analogy of this, loose finger when the indicator light move to suitable channel that you select effective channel. All indicator lights flash that means all channels is effective(group control state).

Transmitter: You can choose nine channels (0c307(4/G) ) , fifteen channels(0c313(4/G/E) ), One number of LCD screen means one control channel. Press“channel choose”button P1-(number descending) or P1+(number increasing) to change the channel, On the analogy of this,loose finger when the indicator light move to suitable channel that you select effective channel.

If LCD screen number show o that means all channels if effective(group control state).

HB Notice: transmitter Do not exposed to moisture and strike, so as not to affect life.

When you use transmitter, if found emission distance obviously short or less sensitive, please change another same new battery. Please have batteries for recycling.

Matchable R Tubular Motor Set up

Delet all the dates and the new emitter has been programmed

Set up

Matchable DC227/DC228 Tubular Motor Set up

Motor Set up

DC305G DC306G DC306E DC307G DC313G DC313E and DC305(A) DC306(A) DC307(A) DC313(A) have different button mark, but the function is the same.

Caution:

This device complies with Part 15 of the FCC. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly ap_eroved by the party responsible for compliance could void the users authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

ncrease the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.