Ningbo Vinc Smart Home Furnishing M3051-60 600x900x25mm LED Illuminated Mirror Instruction Manual
- June 5, 2024
- Ningbo Vinc Smart Home Furnishing
Table of Contents
Ningbo Vinc Smart Home Furnishing M3051-60 600x900x25mm LED Illuminated
Mirror
This is a high quality product and must be installed and maintained as per
these instructions or it may invalidate the Warranty.
To installer: Please leave this manual with the user/householder when
finished.
WARNING:
When using electrical appliances, comply with basic satety precautions in
order to reduce the risk of fire,
electric shocks and personal injury
GENERAL INSTRUCTIONS
No one, and in particular no child, must be in the vicinity of the workplace.
Check that the electrical specifications of this mirror light are compatible
with your installation.
WARNING:
The power supply must be switched off before installation or maintenance.
Remove The fuse or de-activate it, and make sure that it cannot be
reactivated.
The mirror light must be installed by a qualified electrician in accordance
with the wiring standards in force in the country where the installation takes
place.
This electrical product complies with the safety standards in force. Repairs
must only be carried out by qualified technicians using original spare parts.
Any failure to follow these instructions can be particularly dangerous to
users and will invalidate the Warranty.
Installation instructions
-
Fix the screw(s) on the wall where the mirror is to be placed.
Screw fastenings should be made in concrete or other solid structure, or in structures that have been tested and proven for tastings.
Before drilling a hole, make sure that there is no risk of drilling through an existing non-visible cable or pipe and make sure that the hole positioned for the expansion Screw is the mirror and the hanging direction. -
Isolate the power supply by means of the electrical system main switch.
-
Connect the electricity supply to the mains cable (110V-), making sure that the conductors match (mains brown and neutral blue).
-
Carefully attach the mirror to the wall, making sure the mirror hanging properly and level.
-
Restore the power supply.
-
Switch on the mirror light. Your mirror light is now ready to work.
Short Touch – ON/OFF
Long Touch- Dimming
The demister starts working when switching on the monitor light.
Cleaning and Maintenance
Clean regularly and wipe off excess moisture by using a dry cloth only.
Installation and maintenance must only be carried out by a Qualified
Electrician. 
For the LED Light
- Press on the touch switch for a short time to control the light on or off. (Note: The defogging is turned on or off with a mirror light)
- After the light is turned on, press the touch switch for a long time to adjust the brightness of the light.
- Stop whenever you think the brightness is OK for you.
For Bluetooth Music
- Tun on the power.
- Open your phone Bluetooth search for ‘mirror multimedia’ select and connection.
- Then you can play any music on your phone/pad.
NOTE: Bluetooth is connectable to one device only. If you want to connect the second device, please forget the first device.
PARAMETERS
The Bluetooth version for choosing
HOW TO REPLACE?
Every part is dismountable, we will send you new one if it is unworkable.
Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>