ADX LABS Air 2 Wireless Earbuds With Charging Case User Guide
- June 5, 2024
- adx labs
Table of Contents
**ADX LABS Air 2 Wireless Earbuds With Charging Case User Guide
**
Packaging Contents
- Charging Case *1
- Earbuds *2(Left & Right)
- Quick Start Guide*1
- Type C Charging Cable*1
- Earplug *2(Large)
- Earplug *2(Small)
Turning On
The Charging Dock and Earbuds Default To On.(Devices are mobile Phone,Tablets,computers,etc.With Bluetooth Connectivity)
Connecting to the phone
- Open the cover of charging dock with earbuds inside,press the physical button at rear side of charging dock housing for 3 seconds until the blue light on the front of the charging dock blinks
- Enable Bluetooth connections on your device. Search for the earbuds in the Bluetooth device list under the name “MY AIR 2” and connect. If earbuds are successfully connected while inside the charging dock, the blue light will turn green and blink once. If earbud s are successfully connected while outside of the charging dock,the blue light blinks for 3 minutes and turns off. During the 3 minutes,you can press the physical button or close the cover of the charging dock to turn the blinking light off. If the earbuds fail to connect, the blue light continues blinking for 3 minutes and then shuts off. During the 3 minutes, you can press the physical button or close the cover of the charging dock to turn the blinking light off.
Note: If the connection fails, place the earbuds, dock and your device within 10 meters or 30 feet of each other and reconnect manually.
Auto-Connection
Open the cover of the charging dock, and the earbuds will automatically
connect to the last connected device.Notes: Your device’ s Bluetooth settings
should be set to ON and earbuds must be within Bluetooth working distance
(within 10 meters or 30 feet).
Interactive design-Double Tap
- Playing music When wearing both earbuds, double tap the left earbud, to stop the music music and turn on the AI assistant (Siri for iOS phones and Google Assistant for Android phones).When wearing both earbuds, double tap the right earbud, to stop the music.Double tap again to resume playing. When wearing an individual earbud, double tap to stop and re-double tap to continue.
- Placing a call Wear both earbuds or an individual earbud, double tap one earbud to answer phone call and re-double tap to end call.
- In standby When wearing both earbuds, double tap the left earbud, and the AI assistant will be enabled. When wearing both earbuds, double tap the right earbud, to start music. When wearing either earbud, double tap to start music.
Wearing detection
When wearing both or either earbuds, in the music playing scenario, take one or either or both earbuds off, the music stops. Wear it again, and double tap, the music resumes.
Pairing or Resetting Earbuds
- Place both earbuds into the housing and keep the cover open.
- Press the physical button on the Housing for 5 seconds until the blue light blinks, when blinking, your earbuds are ready to pair with other devices.
- Factory reset Open the cover with earbuds inside, rapidly press back button 3 times then close and re-open cover. Repeat if necessary.
Charging
- Earbuds Place the earbuds into the charging dock, when the green light blinks once, the earbuds are charging successfully.
- Charging Dock Charge the dock by plugging it in with a Type C cable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>