SMART HOME D-TERMO-010V DIN Rail Instructions
- June 1, 2024
- Smart Home
Table of Contents
SMART HOME D-TERMO-010V DIN Rail
Specifications
- Product Name: D-TERMO-010V
- Description: Programmable thermostat for controlling Fan Coil Units with 0-10V output
- Power Supply: 110/230V 50/60Hz
- Consumption: Less than 1.5W
- Relay Information:
- Contact Rating: 16A / 250VAC
- Incandescent Lamp Inrush Current: 165A / 20ms
- Max. Switching Voltage: 480VAC
- Max. Switching Power: 4000VA
- Ingress Protection: IP20
Product Usage Instructions
Installation
The D-TERMO-010V should be mounted on a DIN Rail, occupying 2 modules of 17.5 mm.
Features
- 0-10V control of ventilation speed
- Heating or cooling electrothermal shut-off valve control
- Programmable thermostat with 0-10V output
Installation Steps
- Switch off the power supply before installation.
- Mount the D-TERMO-010V on the DIN Rail securely.
- Connect the necessary cables according to the wiring diagram provided.
- Ensure the air temperature sensor OT-MFXY is properly installed for accurate readings.
Programming
Refer to the user manual for detailed programming instructions based on your specific requirements.
FAQ
Q: What are the typical applications of D-TERMO-010V?
- A: The D-TERMO-010V is commonly used for climatization control in homes, shops, hospitals, clinics, and hotels through Fan Coil Units with 0-10V output.
Q: How do I ensure safety while using D-TERMO-010V?
- A: Always switch off the power before any intervention and ensure that only qualified and authorized persons handle the device to avoid electric shock risks.
Q: Can the D-TERMO-010V be programmable?
- A: Yes, the D-TERMO-010V is a programmable thermostat with a 0-10V output for customized temperature control settings.
Description
- The D-TERMO-010V is a programmable thermostat to control Fan Coil Units with 0…10V output.
- Permit the control of the electrothermal shut-off valve and ventilation speed.
- O D-TERMO-010V needs to be installed in a keypad with an air temperature sensor OT-MFXY.
Applications
- Control of climatization by FCU’s 0…10V at homes, shops, hospitals, clinics, and hotels.
Installation
- The D-TERMO-010V is to be mounted on DIN Rail, occupying 2 modules of 17.5 mm.
Features
- 0…10V control of the ventilation speed
- Heating or cooling electrothermal shut-off valve.
- Programmable thermostat with 0…10V output
Technical data
- Power supply 110/230V⁓ 50/60Hz
- Consumption < 1.5W
- Relay information: Contact rating
- Resistive load 16A / 250VAC
- Incandescent Lamp 3500W / 277VAC
- Inrush current 165A / 20ms
- LED (Electronic ballast) 492A / 1.5ms
- Max. switching voltage 480VAC
- Max. switching current 16A
- Max. switching power 4000VA
- Ingress protection IP IP20
- Danger – Electric Shock Risk!
- Switch off the power before any intervention.
- Handling by qualified and authorized persons only.
- Enancer Electrónica, Lda
- Rua Max Grundig, 9
- 4705-820 Braga Portugal
- Tel: +351 253 221 484
- info@only-smartbuildings.com
- www.only-smartbuildings.com
Documents / Resources
|
SMART HOME D-TERMO-010V DIN
Rail
[pdf] Instructions
D-TERMO-010V DIN Rail, D-TERMO-010V, DIN Rail
---|---
Read User Manual Online (PDF format)
Loading......