The Home Depot RB-PL-0007-B 1 Light Matte Black Pendant With Metal Shade Instruction Manual
- June 1, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot RB-PL-0007-B 1 Light Matte Black Pendant With Metal Shade
SAFETY INFORMATION
WARNING
Read all safety precautions and installation instructions carefully before
installing or servicing this fixture. Failure to comply with these
instructions could result in a potentially fatal electric shock, fire, and/or
property damage.
- To reduce the risk of electrical shock or another personal injury that could be hazardous or fatal, ensure the power is turned OFF at the fuse or breaker box before making any electrical connections or removing the old fixture.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Must be connected to 120 volt, 60 Hz power source.
- The fixture may be directly mounted to the ceiling.
- NOT suitable for ground locations.
- The fixture should be installed by a qualified electrician or person experienced with household wiring. The electrical system, and the method of electrical connection of the fixture, must be by the National Electrical Code and local building codes.
NOT INTENDED
FOR USE WITH EMERGENCY EXITS! NOT SUITABLE FOR WET LOCATIONS! CONSULT A
QUALIFIED ELECTRICIAN TO ENSURE THE CORRECT BRANCH CIRCUIT CONDUCTOR! MINIMUM
75° C SUPPLY CONDUCTORS!
TOOLS REQUIRED (Not Included)
NOTE
Keep your receipt and these instructions for Proof of Purchase.
SPECIFICATIONS
INSTALLATION
CAUTION: Before beginning installation turn off the circuit breaker and
light switch.
STEP 1: Carefully remove Parts A & B and hardware from the package.
STEP 2: Screw the loop of the pendant chain (Part A) onto the nipple of
the light fixture (Part B). (Figure 1)
STEP 3: Fix the two nuts (Part F) and nipple (Part D) into the mounting
bar (Part G). Fix the mounting bar (Part G) to the junction box (not included)
and secure using two screws (Part E). (Figure 2)
STEP 4: To adjust the height of the light that you need. Please open the
quick link first, and hang the quick link to the chain link of the
corresponding height, then straighten or cut the extra wires. (Figure 3)
STEP 5: Connect the AC wires of the pendant chain (Part A) to the
corresponding wires in the junction box and secure using wire nuts (Part H),
then secure the ceiling plate of Part A to the junction box using a screw
collar. (Figure 4) The neutral supply wire (white) should be connected to the
neutral fixture wire (black with a raised area), the line supply wire (black)
should be connected to the line fixture wire (Black, no raised area) and the
house ground to the copper fixture wire.
RECOMMENDED: Wrap with each wire nut with electrical tape (not included).
STEP 6: Screw 1 bulb (Parts C) (not included) into the socket of the
light fixture (Part B). (Figure 5)
STEP 7:** Restore power to the fuse box and turn the light switch on to
activate the fixture.
TROUBLESHOOTING
WARRANTY
This product is warranted for 2 years from the date of purchase. If this product does not perform to the specifications supplied on this package, send an email to info@fslled.com for product return and replacement. This replacement is the sole remedy available. Liability for incidental or consequential damage is expressly excluded.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>