Jool Baby Potty Pal Training Watch Instruction Manual
- June 1, 2024
- Jool Baby
Table of Contents
Jool Baby Potty Pal Training Watch
Product Information
Specifications:
- Product Name: Potty Pal Training Watch
- Features: Touch button, animated eyes, customizable time intervals
- Charging: USB magnetic charger
- Power Off: Hold button for 3 seconds
Product Usage Instructions
Charging the Potty Pal Training Watch
- Charge the watch fully before first-time use.
- Insert the USB connector into a compatible USB port.
- Connect the USB cable to a power source.
- Attach the magnetic charger to the back of the watch.
- Look for the flickering lightning bolt icon during charging.
- Watch is fully charged when the lightning bolt icon is full and steady.
Setting Your Potty Watch
- Power on by holding the circle/touch button for 5 seconds.
- Select a time interval (30, 60, 90, or 120 minutes) by tapping the button.
- Scroll through intervals by tapping until desired one is highlighted.
- Set the interval by holding the button down for 3 seconds.
- The countdown will begin once set.
Cancelling Timer and Powering Off
- To cancel the timer, tap the button for the menu to appear, select Yes or No, then confirm the selection by holding the button for 3 seconds.
- To power off, hold the button for 3 seconds while the countdown is displayed. Then hold the circle for 5 seconds to power off.
FAQ
- Q: Can I wear the watch while charging?
- A: No, the product cannot be worn while charging. Please disconnect it during charging.
- Q: How do I wake up the watch from energy-saving mode?
- A: Simply tap the button to wake up the watch from energy-saving mode.
To Charge
Charge your Potty Pal fully before using it for the first time. When the battery is low, Potty Pal will look sleepy (Figure C).
To Charge:
Please note: the product cannot be worn while charging.
-
Insert the USB connector into a compatible USB port and c connect to a power source (Figure A).
-
Attach the magnetic charger to the charging port on the back of the watch (Figure B)
Note: If you do not see the lightning bolt icon, your watch is not connected to a power source. -
When the watch is charging, a flickering lightning bolt appears at the top of the screen (Figure C).
-
When the lightning bolt is full and steady, the watch is fully charged (Figure D).
Setting Your Potty Watch
- To power on, hold down the circle/touch button for 5 seconds until the Jool Baby logo appears. After a few seconds, the character’s animated eyes will appear.
- Once the animated eyes appear, tap the button to set a time interval. You can choose from 30, 60, 90 or 120 minut e intervals.
- Keep tapping to scroll to the desired interval.
- When the desired interval is highlighted, hold the button down for 3 seconds to set.
- Once set, the countdown will begin. To change your selection, follow the steps below to cancel the timer. Then, set your Potty Pal again.
Note: The watch goes into energy-saving mode after 15 seconds. Simply tap the
button to wake up
To Cancel Timer
- From the countdown screen, tap the button for the menu t o appear.
- Tap again to select “Yes” or “No”.
- Hold the button down for 3 seconds to confirm the selection.
Time to Go Potty!
When the countdown ends, the watch will play a chime along with one o f three verbal prompts that will let your child know that “It’s time to go potty!” The screen will then display “Did we go potty?” If you select “Yes”, a congratula tory message and trumpe t sound will play. The timer will then automatically restart. If the first reminder is ignored, a second one will play after 10 minutes. If the second reminder is ignored, a third one will play 5 minutes later. If still ignored, the Potty Pal will stop playing reminders until it is reactivated.
Powering Off
- While the countdown is displayed, hold the button for 3 seconds. The animated eyes will appear.
- Hold the circle for 5 seconds. Your watch will power off.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>