Jool Baby NWW TinyBums Baby Wipe Warmer and Dispenser User Manual
- June 14, 2024
- Jool Baby
Table of Contents
Jool Baby NWW TinyBums Baby Wipe Warmer and Dispenser User Manual
INSTRUCTIONS FOR USE
- Fill the main compartment until the fill line (approximately 50-80 wipes! Do not overflow, as this dries wipes and causes browning
- Plug in power cord and press power button. Power Indicator light will tum on. Allow 6-12 hours for wipes to reach maximum temperature
- Uise continuous feed wipes to ensure a smooth flow of wipes through the feed portal
- Wipes will be only slightly warm to the touch. A wipe warmer is designed to take the chill out of wipes, warming them to a comfortable temperature that protects the sensitive skin of infants Do not expect hot wipes
- To preserve wipes moisture and quality, unplug warmer during long periods of non-use.
CARE & CLEANING
- Unplug and allow to cool completely
- Remove wipes and clean all surfaces with a damp cloth
WARNINGS: This product is designed to warm baby wipes only. Do not use it to warm anything else. To protect against electrical
electrical shock, do not immerse cord, plug, or warmer in water or any other liquid. Do not let cord hang over edge of touch hot surfaces. Do not operate if the cord or plug becomes damaged. Do not operate if the damaged or malfunctions in any manner. Never pull on the power cord. Do not use the power power Arrange power cord to minimize the possibility of accidents. Keep out of reach of children Close necessary when appliance is near children. Unplug when not in use. is subject to the following two conditions: ( 1) This device table or counter.
This device complies with part 15 of the FCC Rules. Operation may not cause
harmful interference, and ( 2 ) this device must accept any interference
received, including interference
that may cause undesired operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>