1more ESS6001T Colorbuds Wireless Earbuds User Guide

: June 12, 2024
: 1more

1more ESS6001T Colorbuds Wireless Earbuds User Guide

In The Box

Headphones x 1 Pair Charging Case x 1
Type-C Charging Cable x 1
Silicone Ear Tip (XS/S/L)
User Guide x 1
Warranty Card x1
1MORE Bear Sticker x 1

Product Overview

Fit

Silicone Ear Tip

XS/S/M/L

Replace

Placement

Power

Power On: Take the headphones out of the charging case (with charge), the headphones will turn on automatically
Power

Power Off: Put the headphones back into the correct slot of the charging case and close the lid, they will automatically turn off and start charging.
Power

Above functions are available for either earbud in individual or Stereo mode.

Headphones Pairing

Bluetooth Pairing To The Device

The Left and Right headphones will automatically pair to eachother after the lid is open when they are in the case (with charge).
If the Left and Right headphones taken out of the case have been powered off or in sleep mode, put the headphones back into the charging case (with charge), they will pair to eachother automatically.

Switching Master/Slave Between Left/Right Earbud

The default setting with the earbuds is Right as the Master and Left as the Slave. As the Master, Right earbud will automatically connect to your device, while the Left earbud connects to the Right (when same battery level).

Left earbud will switch to Master when the battery level of the Left earbud is 30% higher than the Right.
If Master becomes out of range from connected device, then the Slave will switch to Master and initiate pairing mode to connect to your device. Previous Master will enter Left & Right pairing mode.

Bluetooth Pairing To The Device

To connect to your device during first use, turn the headphones on to enter pairing mode, the red and blue lights of the Master earbud will flash alternatively. Headphones will power off if not paired to a device within 3 minutes.
*After first successful pairing, headphones will automatically connect to your device.
To skip previously paired device and pair with a new one, put headphones back into the case, press and hold the pairing button for 2 seconds and select the new device name when powered on (no music or phone calls) to re-enter pairing mode. Above functions are available for either earbud in individual or Stereo mode.

Charging

To charge the case with Type-C cable.
Full charge will take around 85 mins.

The LED light of charging case will indicate different battery status: red light indicates low battery, orange light indicates medium battery and green light indicates full battery

To charge the headphones with the case.
Put headphones in correct slot until it locks in via magnetic slot. Red light of headphones will indicate headphones are charging.

Full charge will take around 70 mins. Red light of headphones turning off indicates charging is complete.

Battery Notification

LED indicator for low battery: when there is 25-30 minutes of use left, you will hear the notification sound and the LED indicator will flash red twice a second, flashing every 10 seconds alternately.

LED indicator for case battery status: when case battery is too low on charge, LED indicator will flash in red once a second, flashing by 1 second alternately and lasting 10 times.

When headphones are placed in charging case and LED of charging case flashes 5 times, the case has low battery, please charge the case first.

Tap Controls

Phonecalls and music can be controlled by tapping the outside of the earbuds.

Tap Controls

Answer/End cal: Double-tap

Voice control on cellphone: Tap 3 times when Bluetooth on and no phone calls

Tap Controls

Play/Pause: Double-tap

Above functions are available for either earbud in individual or Stereo mode.
To decline a call, change a song or control volume, please operate on paired mobile phone or device.
Above functions may vary with different devices

Smart Playback

An IR Sensor automatically detects when you take out your headphones to stop playback intuitively and resumes playback when you put them back in.
To turn off Auto-Play connect the headphones to the 1MORE Music APP,

Extra Functions

If headphones cannot pair normally when power on. Open the case, quickly click the pairing button in the case for 3 times to initial searching for Left & Right pairing.
For single mode: put Left and Right earbuds in the case, double-click the pairing button and enter the separate pairing for single earbud. Then the Left and Right earbuds can be connected to different cellphones.
To unpair the celphone: Put both L & R into the case, and then press and hold the pairing button in the case for 8 seconds,
OTA Firmware Update: can be done synchronously with 1MORE Music APP when Left and Right headphones Bluetooth paired to each other.

*Functions of 1MORE MUSIC APP may vary with different cellphones or operating systems.
For more details, please contact our customer service

1 MORE (1) Year Limited Warranty

1MORE Inc., (“1MORE”) warrants to the original retail purchaser that this product is to be free from defective materials and workmanship for a period of one year from the date of purchase if it is properly used and maintained, If this product proves defective in either material or workmanship, 1MORE, at its option, will (a) repair the product with new or refurbished parts, or (b) replace the product with an equivalent new or refurbished product, at no charge for parts or labor. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, 1MORE at its sole option may replace the unit with a current model of equal or greater value. In some cases, modification to the mounting surface may be required where a new model is substituted, 1MORE assumes no responsibility or liability for such modification. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF THIS WARRANTY, PLEASE RETURN TO THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT WITH AN EQUIVALENT NEW OR REFURBISHED PRODUCT. You will be required to submit a proof of purchasing details, including but not limited to a receipt or sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser,

Limitations:

This limited warranty does not cover the failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration,
This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
This limited warranty is null and void for products not used in accordance with 1MORE’s instructions,
This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an AUTHORIZED dealer.
This limited warranty terminates if you sell or otherwise transfer this product to another party

We Appreciate Your Business

We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your satisfaction. If you would like more details on this product or any of our other products, please visit us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1 MORE will treat you like one.

Tips

Please read this instruction manual carefully and retain for future reference.
, Please fully charge the battery before first use,
If the headphones have been unused for more than 3 months, we recommend that you charge them. This will improve battery capacity.
Only use charging cables and adapters that are FCC (Federal Communications Commission) approved,
In dry environments, static electricity may numb your ear. This is not related to the quality of the product.

Safety Information

Never disassemble the headphones. There are no user-serviceable parts inside.
Do not expose the headphones to temperatures below 32 °F (0°C) or to temperatures above 113 °F (45 °C).
Do not use the headphones in a thunderstorm storm. This could prevent the headphones from working properly, and also increase your chance of being electrically shocked.
Do not use oil or any volatile liquid to clean this product.
Do not listen at high volumes for extended periods of time.
Do not use the headphones in traffic. Do not use the headphones any time it would be dangerous to be unaware of noises around you.
Adult supervision is required for children of age 6 and under,
If you don’t feel comfortable after wearing the headphones, please refer to an aurist for advice on whether in-ear headphones are suitable for you.

Warning

Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte etc); Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

The symbol indicates DC voltage.

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2014/53/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

FCC

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types ESS6001T (FCC ID: 2ASDIESS6001T) has also been tested against this SAR limit.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changesto this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: Trade Name: 1MORE
Model No.: ESS6001T
Responsible Party – U.S. Contact Information
1 MORE USA, Inc.
Address: 10225 Barnes Canyon Road, Suite A202, San Diego, California, 92121
Tel: 1-855-551-6673
E-Mail: support@1moreusa.com