SUNUV SUN9C LED Nail Lamp Instruction Manual
- June 1, 2024
- SUNUV
Table of Contents
SUNUV SUN9C LED Nail Lamp
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
- READ ALL INSTRUCTIONS BEFORE USING
- KEEP AWAY FROM WATER
- DANGER – To reduce the risk of electrocution:
- Always unplug this appliance immediately after using it.
- Do not place or store appliances where they can fall or be pulled into a tub or sink.
- Do not use it while bathing.
- Do not place in or drop into water or other liquid.
- Do not reach for an appliance that has fallen into the water. Unplug immediately.
- WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:
- An appliance should never be left unattended when plugged in.
- Close supervision is necessary when the appliance is used by, on, or near children or invalids.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or if it has been dropped into water. Return the appliance to a service center for examination and repair.
- Keep the cord away from heated surfaces.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never drop or insert any object into any opening.
- Do not use outdoors or operate where aerosol (spray) products are being used.
- WARNING: Do not expose the skin to a UVLED lamp for more than 10 minutes.
- Individuals can’t reuse in one day.
- SAVE THESE INSTRUCTIONS
PRODUCT SAFETY WARNING
- Please read through this User Manual carefully and keep it properly.
- Please make sure the input voltage meets the requirements of the product. Iii Keep away from water or high humidity.
- Do not allow debris or any type of liquid into the product, or a malfunction may occur.
- When the timer doesn’t work, stop using the product.
- A damaged adapter must be replaced to avoid risk. Please contact your dealer regarding this matter.
- Please apply neutral detergent for cleansing purposes. Make sure it is turned off and unplugged. Do not use remover or other acidic detergent to wipe.
- Do not keep the machine working continuously for over 600, otherwise, it may reduce its lifespan.
- It is recommended that the curing time for base gel and color gel should not exceed 60s, and that of the top coat should not exceed 90s.
- Do not use gels that are not compatible with the product.
- Apply proper maintenance may extend the lifespan.
- Not suitable for people who are sensitive to UV, under certain medication, or who require special care.
- When not in use, please unplug.
ITEM CHECKLIST
- Lamp
- Adaptor
- User Manual
PARTS INTRODUCTION
- Infrared Sensor
- Power Button (30s/60s Switch)
- 30s Indicator
- 60s Indicator
- Port
PRODUCT INTRODUCTION
The UVLED lamp is designed for both professional manicurists and amateurs, to cure UV, build, and LED gels.
HOW TO USE
- Connect the adapter to the host first, then plug the adapter into the outlet.
- Put your fingers under the lamp, and it triggers the infrared sensor to start the curing process. The default process lasts for 99.
- Press the power button for a 30s cure. Press again for the 60s. Press the third lime to turn off the lamp.
TECHNICAL PARAMETERS
- 18 LED beads
- Lamp input voltage: DC 24V/0.65A (Powered by an external adapter)
- Adapter: Rated input 100-240Vac 50/60Hz 0.5A
- Rated output: DC 24V/0.65A
- Size: 210mm x 120mm x 80mm
- Wavelength: 365nm+405nm
- Working Temperature: -10-+40°C; Working Humidity: 10%-90%RH
- Storage Temperature: -20-+60°C; Storage Humidity: 5%-95%RH
- Working Atmosphere: 86-106kPa
WARNINGS
- Please use proper gels that are compatible with the product.
- This product is not suitable for children, pregnant women, or skin cancer patients.
- Reduce skin exposure to UV light, and do not stare at the UV light.
- Do not overuse the product. Avoid eye exposure to UV lights to prevent retinal damage.
- It is recommended that you wear sunscreen before the cure.
- Do not take any medication that triggers UV allergy. When in doubt, please consult with your physician.
- If any discomfort occurs (e.g. rashes, pain) after the cure, please seek medical attention immediately.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>