PureLink PT-HDBT-1010 18Gbps HDMI HDBaseT Extender Set User Guide
- June 1, 2024
- PureLink
Table of Contents
PureLink PT-HDBT-1010 18Gbps HDMI HDBaseT Extender Set
Product Information
Specifications
- Product Name: PureTools PT-HDBT-1010 4K 18Gbps HDMI HDBaseT Extender Set
- Transmission: 18G AV, 1G Ethernet, USB 2.0, 100W power, and multiple control signals
- Transmission Distance: Up to 100 meters over a single Cat cable
- Features: HDMI loop-out, analog audio de-embedding, RS232 inputs, status LEDs
- HDMI Compatibility: HDMI 2.0, HDCP 1.x / 2.x, Dolby Vision support
Product Usage Instructions
-
Connection Setup:
Connect the transmitter (TX) and receiver (RX) units using a single Cat cable up to 100 meters in length. -
Power Connection:
Use the screwable power connectors on both devices to ensure a secure power connection. -
Signal Transmission:
Transmit uncompressed AV signals, Ethernet, USB 2.0, power, and control signals bidirectionally between TX and RX units. -
ARC Modes:
Select one of the three ARC modes using the DIP switch on the RX unit for flexible ARC signal input and output options. -
USB 2.0 Direction:
Utilize the four USB-A device ports and one USB-B host port for transmitting USB 2.0 signals in both directions as needed. -
Additional Features:
Take advantage of the analog audio output on the TX unit, RS232 inputs, and status LEDs for monitoring functions.
Frequently Asked Questions
Q: Can the PureTools PT-HDBT-1010 Extender Set support 4K resolution?
A: Yes, the extender set supports uncompressed transmission of AV signals up to 4K@60 with full HDMI 2.0 bandwidth.
Q: How many USB devices can be connected to the extender set?
A: The extender set supports up to four USB 2.0 devices that can be implemented on either side and transmitted bi-directionally.
Q: What is the maximum distance for signal transmission between the transmitter and receiver units?
A: The extender set can transmit signals over a single Cat cable up to 100 meters in distance.
NEW RELEASE DOCUMENT
PureTools PT-HDBT-1010 4K 18Gbps HDMI HDBaseT Extender Set
Rethink Installations with HDBaseT Spec 3
Where once separate stand-alone solutions had to be used in parallel, a single extender system can possibly do the trick today. The PT-HDBT-1010 HDBaseT v3 Extender Set from PureLink is such a multi-purpose powerhouse, transmitting uncompressed AV signals at full 18Gbps HDMI 2.0 bandwidth, as well as Ethernet, power, ARC, four times USB 2.0, and various control signals over a single Cat cable up to 100meters. It supports three switchable ARCmodesandup to four USB 2.0 devices that can be implemented on either side and transmitted to the other, e.g. for KVM, remote storage or touchback signals. With HDMI loop-out, analog audio de-embedding and many control functions, complex setups can be realized with minimal hardware.
-
HDBaseT Spec 3
The HDBaseT specification 3 combines the transmission of 18G AV, 1G Ethernet, USB 2.0, 100W power and multiple control signals over a single Cat cable up to 100 meters. -
Bidirectional Signals
Ethernet up to 1Gbps, PoC / PoH up to 100W, and IR control signals with separate 3.5mm jack in/out ports on both TX and RX are transmitted in either direction. -
USB 2.0 in Both Directions
Four USB-A „Device” and one USB-B „Host” ports as well as dual DIP selectors on TX and RX. USB 2.0 signals can be transmitted either in one or the other direction. -
Uncompressed HDMI 2.0
Uncompressed transmission of AV signals up to 4K@60 with full HDMI 2.0 bandwidth up to 18Gbps including support for HDCP 1.x / 2.x and Dolby Vision as well as loop output on the TX. -
Three ARC Modes
Three different ARC modes selectable by DIP switch on the RX. An ARC signal can be input and output via HDMI and / or Toslink, incl. partial CEC support. -
Even More Features
Analog audio output on the TX via 3.5mm jack as well as RS232 inputs, status LEDs for all relevant functions and screwable power connectors on both devices.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>