The Home Depot HW70659 Single Set Patio Rattan Furniture Set Instruction Manual

The Home Depot HW70659 Single Set Patio Rattan Furniture Set

Product Specifications:

• Number of Pieces: 10
• Includes: 4 Armless Sofas, 2 Corner Sofas, Table Frame, Seat Cushions, Pillows
• Hardware: Bolts, Plastic Feet, Washers, Allen Key

Product Usage Instructions

Before You Start:

Please read all instructions carefully and retain them for future reference. Separate and count all parts and hardware.
Assemble the items near their intended location. Place the product on a flat, steady surface away from children.

Assembly Steps:

1. Tighten screws halfway before fully securing with an Allen key.Use a stable surface for adjustment.
2. Gradually tighten all screws using tools.
3. If screws are misaligned, loosen others by 50% and continue assembly.
4. If the product is unstable, loosen all screws, adjust on a flat surface, and retighten.

Part List:

• 4 x Back Frame
• 4 x Seat Frame
• 2 x Side Frame Big
• 2 x Corner Frame Small
• 1 x Table Frame

Hardware List:

• 74 x Bolt M6 x 30 mm
• 28 x Plastic Feet
• 10 x Plastic Sofa Connector
• 74 x Washers 06x16x1 mm
• 3 x Allen Key M4

Frequently Asked Questions (FAQ):

Q: What should I do if some screws are not aligning properly during assembly?
A: If screws are misaligned, loosen other screws by 50% and continue the assembly process.

Q: How can I ensure the stability of the product after assembly?
A: If the product is not stable, loosen all screws, adjust it on a flat surface, and retighten all screws.

• Please read all instructions carefully.
• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Always place the product on a flat, steady and stable surface.
• Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

PRODUCT OVERVIEW

Notice

1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up all screws again.
6. Note: If one or some screws are fully tightened during assembly, chances are the others will not align with holes. However, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.

Part List

Hardware List

ASSEMBLY

1. (4 x Armless sofa assembly/assemblage de 4 canapes sans bras)
   Connect Side Frame (C) to Seat Frame (B) with Bolts (1) & Washers (3)

2. Connect Part from STEP 1 to Back Frame (A ) with Bolts (1) & Washers (3)

3. Connect Part from STEP 2 with Plastic feet (4) & Bolts (2)

4. Put on Seat Cushion (H) & Big Pillow (I) to complete the assembly of Armless sofa

5. (2 x Corner sofa assembly/assemblage de 2 canapes d’angle)
   Connect Side Frame (C) to Corner Seat Frame (F) with Bolts (1) & Washers (3)

6. Adjustable bolt
   Connect Big Corner Frame (D) to Small Corner Frame (E) with Bolts (1) & Washers (3)

7. Connect Part from STEP 5 to Part from STEP 6 with Bolts (1) & Washers (3)

8. Connect Part from STEP 7 with Plastic feet (4) & Bolts (2)

9. Put on Seat Cushion (H) & Big Pillow (I), Small Pillow (J), Back Pillow (K) to complete the assembly of Corner sofa

10. (1 x T able assembly
    Connect Table Frame (G) with Plastic feet (4) & Bolts (2)

11. Put on Table Glass (L) to complete the assembly of Table

FINISH

Combination and Arrangement

Return /Damage

• DO NOT discard the box/ original packaging.
  In case a return is required, the item must be returned in original box. Without this your return will not be accepted.

• Take a photo of the box markings.
  A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.

• Take a photo of the damaged part (if applicable).
  A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.

• Send us an email with the images requested.
  Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>